From: Redeeman <redeeman@metanurb.dk>
To: Bernd Schubert <bs@q-leap.de>
Cc: Justin Piszcz <jpiszcz@lucidpixels.com>,
bengt@sm7jqb.se, debian-user@lists.debian.org,
linux-raid@vger.kernel.org, linux-ide@vger.kernel.org
Subject: Re: Corrupt data - RAID sata_sil 3114 chip
Date: Sat, 03 Jan 2009 03:31:57 +0100 [thread overview]
Message-ID: <1230949917.21115.4.camel@localhost> (raw)
In-Reply-To: <20090102213007.GA4349@lanczos.q-leap.de>
On Fri, 2009-01-02 at 22:30 +0100, Bernd Schubert wrote:
> Hello Bengt,
>
> sil3114 is known to cause data corruption with some disks. So far I only know
> about Seagate, but maybe there issues with newer Samsungs as well?
>
> http://lkml.indiana.edu/hypermail/linux/kernel/0710.2/2035.html
>
> Unfortuntely this issue has been simply ignored by the SATA developers :(
> So if you want to be on the safe side, go an get another controller.
Are you sure? is this not the "15" or "slow_down" thing mentioned here:
http://ata.wiki.kernel.org/index.php/Sata_sil ?
>
> I hope I won't frighten you too much, but it also might be possible one of
> your disks has a problem, I have also seen a few broken disks, which don't
> return what you write to it...
>
>
> Cheers,
> Bernd
>
>
> On Fri, Jan 02, 2009 at 07:42:30AM -0500, Justin Piszcz wrote:
> >
> >
> > On Fri, 2 Jan 2009, Bengt Samuelsson wrote:
> >
> >>
> >> Hi,
> >>
> >> I need some support for this soft-raid system.
> >>
> >> I am running it as RAID5 with 4 samsung spinpoint 500G SATA300 tot 1.3T byte
> >>
> >> And it runs in http://sm7jqb.dnsalias.com
> >> I use mdadm sytem in a Debian Linux
> >> CPU 1.2Mhz 1G memory ( my older 433Mhz / 512M dont work at all )
> >>
> >> I have 'some courrupt' data. And I don't understand whay and how to fix it.
> >> Mybee slow it down more, but how slow it down?
> >>
> >> Any with experents from this cheep way of RAID systems.
> >>
> >> Ask for more information and I can get it, logs, setup files and what
> >> you want
> >> to know.
> >>
> >> --
> >> Bengt Samuelsson
> >> Nydalavägen 30 A
> >> 352 48 Växjö
> >>
> >> +46(0)703686441
> >>
> >> http://sm7jqb.se
> >>
> >>
> >> --
> >> To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org with a
> >> subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
> >>
> >
> > If this is an mdadm-related raid (not dmraid) please show all relevant md
> > info, mdadm -D /dev/md0, I have cc'd linux-raid on this thread for you.
> >
> > You'll want to read md.txt in /usr/src/linux/Documentation and read on
> > the check and repair commands.
> >
> > In addition, have you run memtest86 on your system first to make sure its
> > not memory related?
> >
> > Justin.
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-raid" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2009-01-03 2:31 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <495E01E3.9060903@sm7jqb.se>
2009-01-02 12:42 ` Corrupt data - RAID sata_sil 3114 chip Justin Piszcz
2009-01-02 12:45 ` Corrupt data - RAID sata_sil 3114 chip (corrected email address) Justin Piszcz
2009-01-02 21:30 ` Corrupt data - RAID sata_sil 3114 chip Bernd Schubert
2009-01-02 21:47 ` Twigathy
2009-01-03 2:31 ` Redeeman [this message]
2009-01-03 13:13 ` Bernd Schubert
2009-01-03 13:39 ` Alan Cox
2009-01-03 16:20 ` Bernd Schubert
2009-01-03 18:31 ` Robert Hancock
2009-01-03 22:19 ` James Youngman
2009-01-03 20:04 Bernd Schubert
2009-01-03 20:53 ` Robert Hancock
2009-01-03 21:11 ` Bernd Schubert
2009-01-03 23:23 ` Robert Hancock
2009-01-07 4:59 ` Tejun Heo
2009-01-07 5:38 ` Robert Hancock
2009-01-07 15:31 ` Bernd Schubert
2009-01-11 0:32 ` Robert Hancock
2009-01-11 0:43 ` Robert Hancock
2009-01-12 1:30 ` Tejun Heo
2009-01-19 18:43 ` Dave Jones
2009-01-20 2:50 ` Robert Hancock
2009-01-20 20:07 ` Dave Jones
[not found] <bQVFb-3SB-37@gated-at.bofh.it>
[not found] ` <bQVFb-3SB-39@gated-at.bofh.it>
[not found] ` <bQVFb-3SB-41@gated-at.bofh.it>
[not found] ` <bQVFc-3SB-43@gated-at.bofh.it>
[not found] ` <bQVFc-3SB-45@gated-at.bofh.it>
[not found] ` <bQVFc-3SB-47@gated-at.bofh.it>
[not found] ` <bQVFb-3SB-35@gated-at.bofh.it>
[not found] ` <4963306F.4060504@sm7jqb.se>
2009-01-06 10:48 ` Justin Piszcz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1230949917.21115.4.camel@localhost \
--to=redeeman@metanurb.dk \
--cc=bengt@sm7jqb.se \
--cc=bs@q-leap.de \
--cc=debian-user@lists.debian.org \
--cc=jpiszcz@lucidpixels.com \
--cc=linux-ide@vger.kernel.org \
--cc=linux-raid@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).