* Raid6 rebuild question
@ 2012-02-02 21:16 Krzysztof Adamski
0 siblings, 0 replies; only message in thread
From: Krzysztof Adamski @ 2012-02-02 21:16 UTC (permalink / raw)
To: linux-raid
I changed a drive in a Raid 6 array and while I'm watching the rebuild,
this is what I see from the atop command:
DSK | sdo | busy 99% | read 397/s | write 0/s | avio 2 ms |
DSK | sdm | busy 64% | read 0/s | write 310/s | avio 2 ms |
DSK | sdk | busy 62% | read 577/s | write 0/s | avio 1 ms |
DSK | sdp | busy 60% | read 579/s | write 0/s | avio 1 ms |
DSK | sdi | busy 60% | read 584/s | write 0/s | avio 1 ms |
DSK | sdn | busy 60% | read 578/s | write 0/s | avio 1 ms |
DSK | sdj | busy 59% | read 587/s | write 0/s | avio 1 ms |
DSK | sdl | busy 59% | read 580/s | write 0/s | avio 1 ms |
sdm is the new drive, all drives are identical and connected to the same
LSI controller. Is this normal or sdo is having problems?
md2 : active raid6 sdm3[8] sdl3[0] sdo3[6] sdj3[5] sdi3[4] sdp3[3] sdk3[2] sdn3[1]
8777658240 blocks level 6, 64k chunk, algorithm 2 [8/7] [UUUUUUU_]
[============>........] recovery = 63.3% (926139636/1462943040) finish=190.9min speed=46850K/sec
bitmap: 0/11 pages [0KB], 65536KB chunk
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2012-02-02 21:16 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-02-02 21:16 Raid6 rebuild question Krzysztof Adamski
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).