From: mwilck@arcor.de
To: neilb@suse.de, linux-raid@vger.kernel.org
Cc: mwilck@arcor.de
Subject: [PATCH 17/27] DDF: get_extents: support secondary RAID level
Date: Wed, 3 Jul 2013 22:27:57 +0200 [thread overview]
Message-ID: <1372883287-8859-18-git-send-email-mwilck@arcor.de> (raw)
In-Reply-To: <1372883287-8859-1-git-send-email-mwilck@arcor.de>
Use get_pd_index_from_refnum() in get_extents to determine
matching VD. This will ensure RAID 10 (secondary RAID level)
support, too.
This also fixes a bug in the previous get_extents() code (missing
__be16_to_cpu for conf.prim_elmnt_count).
DDF test case (10ddf-create) verified.
Signed-off-by: Martin Wilck <mwilck@arcor.de>
---
super-ddf.c | 30 ++++++++++++++----------------
1 files changed, 14 insertions(+), 16 deletions(-)
diff --git a/super-ddf.c b/super-ddf.c
index f22c0e3..e7aa0ad 100644
--- a/super-ddf.c
+++ b/super-ddf.c
@@ -467,6 +467,11 @@ static void pr_state(const struct ddf_super *ddf, const char *msg) {}
#define ddf_set_updates_pending(x) \
do { (x)->updates_pending = 1; pr_state(x, __func__); } while (0)
+static unsigned int get_pd_index_from_refnum(const struct vcl *vc,
+ __u32 refnum, unsigned int nmax,
+ const struct vd_config **bvd,
+ unsigned int *idx);
+
static unsigned int calc_crc(void *buf, int len)
{
/* crcs are always at the same place as in the ddf_header */
@@ -2289,23 +2294,21 @@ static struct extent *get_extents(struct ddf_super *ddf, struct dl *dl)
*/
struct extent *rv;
int n = 0;
- unsigned int i, j;
+ unsigned int i;
rv = xmalloc(sizeof(struct extent) * (ddf->max_part + 2));
for (i = 0; i < ddf->max_part; i++) {
+ const struct vd_config *bvd;
+ unsigned int ibvd;
struct vcl *v = dl->vlist[i];
- if (v == NULL)
+ if (v == NULL ||
+ get_pd_index_from_refnum(v, dl->disk.refnum, ddf->mppe,
+ &bvd, &ibvd) == DDF_NOTFOUND)
continue;
- for (j = 0; j < v->conf.prim_elmnt_count; j++)
- if (v->conf.phys_refnum[j] == dl->disk.refnum) {
- /* This device plays role 'j' in 'v'. */
- rv[n].start = __be64_to_cpu(
- LBA_OFFSET(ddf, &v->conf)[j]);
- rv[n].size = __be64_to_cpu(v->conf.blocks);
- n++;
- break;
- }
+ rv[n].start = __be64_to_cpu(LBA_OFFSET(ddf, bvd)[ibvd]);
+ rv[n].size = __be64_to_cpu(bvd->blocks);
+ n++;
}
qsort(rv, n, sizeof(*rv), cmp_extent);
@@ -2682,11 +2685,6 @@ static int remove_from_super_ddf(struct supertype *st, mdu_disk_info_t *dk)
*/
#define NULL_CONF_SZ 4096
-static unsigned int get_pd_index_from_refnum(const struct vcl *vc,
- __u32 refnum, unsigned int nmax,
- const struct vd_config **bvd,
- unsigned int *idx);
-
static int __write_ddf_structure(struct dl *d, struct ddf_super *ddf, __u8 type,
char *null_aligned)
{
--
1.7.1
next prev parent reply other threads:[~2013-07-03 20:27 UTC|newest]
Thread overview: 57+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-07-03 20:27 DDF/RAID10 patch series mwilck
2013-07-03 20:27 ` [PATCH 01/27] DDF (cleanup): use a common macro for failed searches mwilck
2013-07-03 20:27 ` [PATCH 02/27] DDF: check_secondary: fix treatment of missing BVDs mwilck
2013-07-03 20:27 ` [PATCH 03/27] DDF: load_ddf_headers: use secondary header as fallback mwilck
2013-07-08 5:43 ` NeilBrown
2013-07-08 20:56 ` Martin Wilck
2013-07-03 20:27 ` [PATCH 04/27] DDF: handle "open flag" according to spec mwilck
2013-07-03 20:27 ` [PATCH 05/27] DDF: Implement store_super_ddf mwilck
2013-07-08 5:48 ` NeilBrown
2013-07-10 17:37 ` Martin Wilck
2013-07-15 5:31 ` NeilBrown
2013-07-18 18:48 ` [PATCH 1/3] DDF: increase seq number in ddf_set_updates_pending mwilck
2013-07-18 18:49 ` [PATCH 2/3] DDF: make "null_aligned" a static buffer mwilck
2013-07-18 18:49 ` [PATCH 3/3] DDF: factor out writing super block to single disk mwilck
2013-07-18 18:51 ` [PATCH 05/27] DDF: Implement store_super_ddf Martin Wilck
2013-07-03 20:27 ` [PATCH 06/27] DDF: ddf_open_new: implement minimal consistency check mwilck
2013-07-03 20:27 ` [PATCH 07/27] DDF: find_vdcr: account for secondary RAID level mwilck
2013-07-08 6:16 ` NeilBrown
2013-07-08 21:03 ` Martin Wilck
2013-07-03 20:27 ` [PATCH 08/27] DDF: ddf_set_disk: move status logic to separate function mwilck
2013-07-03 20:27 ` [PATCH 09/27] DDF: get_svd_state: Status logic for secondary RAID level mwilck
2013-07-03 20:27 ` [PATCH 10/27] DDF: allow empty slots in virt disk table mwilck
2013-07-03 20:27 ` [PATCH 11/27] DDF: layout_ddf2md: new DDF->md RAID layout conversion mwilck
2013-07-08 6:48 ` NeilBrown
2013-07-08 21:06 ` Martin Wilck
2013-07-03 20:27 ` [PATCH 12/27] DDF: layout_md2ddf: new md->DDF " mwilck
2013-07-08 6:28 ` NeilBrown
2013-07-03 20:27 ` [PATCH 13/27] DDF: Simplify allocation of "other BVDs" mwilck
2013-07-03 20:27 ` [PATCH 14/27] DDF: init_super_ddf_bvd: initialize other bvds mwilck
2013-07-03 20:27 ` [PATCH 15/27] DDF: validate_geometry_ddf: support RAID10 mwilck
2013-07-03 20:27 ` [PATCH 16/27] DDF: use LBA_OFFSET macro instead of lba_offset field mwilck
2013-07-03 20:27 ` mwilck [this message]
2013-07-03 20:27 ` [PATCH 18/27] DDF: add_to_super_ddf: allow empty slots in phys disk table mwilck
2013-07-03 20:27 ` [PATCH 19/27] DDF: add_to_super_ddf: Use same amount of workspace as other disks mwilck
2013-07-03 20:28 ` [PATCH 20/27] DDF: add_to_super_ddf: RAID10 changes mwilck
2013-07-03 20:28 ` [PATCH 21/27] DDF: add_to_super_ddf_bvd: use get_svd_state() mwilck
2013-07-03 20:28 ` [PATCH 22/27] DDF: getinfo_super_ddf_bvd: lba_offset calculation for RAID10 mwilck
2013-07-03 20:28 ` [PATCH 23/27] DDF: guid_str: convenience function to print GUID for debugging mwilck
2013-07-03 20:28 ` [PATCH 24/27] DDF: ddf_set_array_state: more meaningful output mwilck
2013-07-03 20:28 ` [PATCH 25/27] DDF: ddf_process_update: handle update of conf records for SVD mwilck
2013-07-03 20:28 ` [PATCH 26/27] DDF: ddf_process_update: Fix vlist treatment for SVDs mwilck
2013-07-03 20:28 ` [PATCH 27/27] tests/10ddf-create: add RAID 10 array mwilck
2013-07-04 10:10 ` DDF/RAID10 patch series NeilBrown
2013-07-08 6:53 ` NeilBrown
2013-07-08 21:50 ` Fixes for the DDF " mwilck
2013-07-08 21:50 ` [PATCH 28/39] test/10-ddf-create: fix comments mwilck
2013-07-08 21:50 ` [PATCH 29/39] Monitor: Don't write metadata in inactive array state mwilck
2013-07-08 21:50 ` [PATCH 30/39] DDF: write_init_super_ddf: don't zero superblocks for subarrays mwilck
2013-07-08 21:50 ` [PATCH 31/39] DDF: implement kill_subarray mwilck
2013-07-08 21:50 ` [PATCH 32/39] DDF: getinfo_super_ddf_bvd: identify disk by refnum mwilck
2013-07-08 21:50 ` [PATCH 33/39] DDF: getinfo_super_ddf_bvd: fix raid_disk calculation mwilck
2013-07-08 21:50 ` [PATCH 34/39] DDF: fix endianness of refnum in debug messages mwilck
2013-07-08 21:50 ` [PATCH 35/39] DDF: add debug message in add_super_ddf_bvd mwilck
2013-07-08 21:50 ` [PATCH 36/39] DDF: ddf_process_update: add debug messages fore adding VDs mwilck
2013-07-08 21:50 ` [PATCH 37/39] DDF: guid_str: more readable output mwilck
2013-07-08 21:50 ` [PATCH 38/39] DDF: ddf_process_update: some more debug messages mwilck
2013-07-08 21:50 ` [PATCH 39/39] DDF: ddf_process_update: Fix updates for SVDs mwilck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1372883287-8859-18-git-send-email-mwilck@arcor.de \
--to=mwilck@arcor.de \
--cc=linux-raid@vger.kernel.org \
--cc=neilb@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).