From: mwilck@arcor.de
To: neilb@suse.de, linux-raid@vger.kernel.org
Cc: mwilck@arcor.de
Subject: [PATCH 3/3] DDF: factor out writing super block to single disk
Date: Thu, 18 Jul 2013 20:49:01 +0200 [thread overview]
Message-ID: <1374173341-9264-3-git-send-email-mwilck@arcor.de> (raw)
In-Reply-To: <20130715153141.4ac1cef9@notabene.brown>
Factor out single disk from __write_init_super_ddf to a new function
_write_super_to_disk. Use this function in store_super_ddf.
---
super-ddf.c | 112 ++++++++++++++++++++++++++++-------------------------------
1 files changed, 53 insertions(+), 59 deletions(-)
diff --git a/super-ddf.c b/super-ddf.c
index efdba6d..8c6fa6d 100644
--- a/super-ddf.c
+++ b/super-ddf.c
@@ -2864,70 +2864,72 @@ out:
return ret;
}
+static int _write_super_to_disk(struct ddf_super *ddf, struct dl *d)
+{
+ unsigned long long size;
+ int fd = d->fd;
+ if (fd < 0)
+ return 0;
+
+ /* We need to fill in the primary, (secondary) and workspace
+ * lba's in the headers, set their checksums,
+ * Also checksum phys, virt....
+ *
+ * Then write everything out, finally the anchor is written.
+ */
+ get_dev_size(fd, NULL, &size);
+ size /= 512;
+ if (d->workspace_lba != 0)
+ ddf->anchor.workspace_lba = d->workspace_lba;
+ else
+ ddf->anchor.workspace_lba =
+ __cpu_to_be64(size - 32*1024*2);
+ if (d->primary_lba != 0)
+ ddf->anchor.primary_lba = d->primary_lba;
+ else
+ ddf->anchor.primary_lba =
+ __cpu_to_be64(size - 16*1024*2);
+ if (d->secondary_lba != 0)
+ ddf->anchor.secondary_lba = d->secondary_lba;
+ else
+ ddf->anchor.secondary_lba =
+ __cpu_to_be64(size - 32*1024*2);
+ ddf->anchor.seq = ddf->active->seq;
+ memcpy(&ddf->primary, &ddf->anchor, 512);
+ memcpy(&ddf->secondary, &ddf->anchor, 512);
+
+ ddf->anchor.openflag = 0xFF; /* 'open' means nothing */
+ ddf->anchor.seq = 0xFFFFFFFF; /* no sequencing in anchor */
+ ddf->anchor.crc = calc_crc(&ddf->anchor, 512);
+
+ if (!__write_ddf_structure(d, ddf, DDF_HEADER_PRIMARY))
+ return 0;
+
+ if (!__write_ddf_structure(d, ddf, DDF_HEADER_SECONDARY))
+ return 0;
+
+ lseek64(fd, (size-1)*512, SEEK_SET);
+ if (write(fd, &ddf->anchor, 512) < 0)
+ return 0;
+
+ return 1;
+}
+
static int __write_init_super_ddf(struct supertype *st)
{
struct ddf_super *ddf = st->sb;
struct dl *d;
int attempts = 0;
int successes = 0;
- unsigned long long size;
- __u32 seq;
pr_state(ddf, __func__);
- seq = ddf->active->seq;
-
/* try to write updated metadata,
* if we catch a failure move on to the next disk
*/
for (d = ddf->dlist; d; d=d->next) {
- int fd = d->fd;
-
- if (fd < 0)
- continue;
-
attempts++;
- /* We need to fill in the primary, (secondary) and workspace
- * lba's in the headers, set their checksums,
- * Also checksum phys, virt....
- *
- * Then write everything out, finally the anchor is written.
- */
- get_dev_size(fd, NULL, &size);
- size /= 512;
- if (d->workspace_lba != 0)
- ddf->anchor.workspace_lba = d->workspace_lba;
- else
- ddf->anchor.workspace_lba =
- __cpu_to_be64(size - 32*1024*2);
- if (d->primary_lba != 0)
- ddf->anchor.primary_lba = d->primary_lba;
- else
- ddf->anchor.primary_lba =
- __cpu_to_be64(size - 16*1024*2);
- if (d->secondary_lba != 0)
- ddf->anchor.secondary_lba = d->secondary_lba;
- else
- ddf->anchor.secondary_lba =
- __cpu_to_be64(size - 32*1024*2);
- ddf->anchor.seq = seq;
- memcpy(&ddf->primary, &ddf->anchor, 512);
- memcpy(&ddf->secondary, &ddf->anchor, 512);
-
- ddf->anchor.openflag = 0xFF; /* 'open' means nothing */
- ddf->anchor.seq = 0xFFFFFFFF; /* no sequencing in anchor */
- ddf->anchor.crc = calc_crc(&ddf->anchor, 512);
-
- if (!__write_ddf_structure(d, ddf, DDF_HEADER_PRIMARY))
- continue;
-
- if (!__write_ddf_structure(d, ddf, DDF_HEADER_SECONDARY))
- continue;
-
- lseek64(fd, (size-1)*512, SEEK_SET);
- if (write(fd, &ddf->anchor, 512) < 0)
- continue;
- successes++;
+ successes += _write_super_to_disk(ddf, d);
}
return attempts != successes;
@@ -3729,17 +3731,9 @@ static int store_super_ddf(struct supertype *st, int fd)
(int)minor(sta.st_rdev));
return 1;
}
- /*
- For DDF, writing to just one disk makes no sense.
- We would run the risk of writing inconsistent meta data
- to the devices. So just call __write_init_super_ddf and
- write to all devices, including this one.
- Use the fd passed to this function, just in case dl->fd
- is invalid.
- */
ofd = dl->fd;
dl->fd = fd;
- ret = __write_init_super_ddf(st);
+ ret = (_write_super_to_disk(ddf, dl) != 1);
dl->fd = ofd;
return ret;
}
--
1.7.1
next prev parent reply other threads:[~2013-07-18 18:49 UTC|newest]
Thread overview: 57+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-07-03 20:27 DDF/RAID10 patch series mwilck
2013-07-03 20:27 ` [PATCH 01/27] DDF (cleanup): use a common macro for failed searches mwilck
2013-07-03 20:27 ` [PATCH 02/27] DDF: check_secondary: fix treatment of missing BVDs mwilck
2013-07-03 20:27 ` [PATCH 03/27] DDF: load_ddf_headers: use secondary header as fallback mwilck
2013-07-08 5:43 ` NeilBrown
2013-07-08 20:56 ` Martin Wilck
2013-07-03 20:27 ` [PATCH 04/27] DDF: handle "open flag" according to spec mwilck
2013-07-03 20:27 ` [PATCH 05/27] DDF: Implement store_super_ddf mwilck
2013-07-08 5:48 ` NeilBrown
2013-07-10 17:37 ` Martin Wilck
2013-07-15 5:31 ` NeilBrown
2013-07-18 18:48 ` [PATCH 1/3] DDF: increase seq number in ddf_set_updates_pending mwilck
2013-07-18 18:49 ` [PATCH 2/3] DDF: make "null_aligned" a static buffer mwilck
2013-07-18 18:49 ` mwilck [this message]
2013-07-18 18:51 ` [PATCH 05/27] DDF: Implement store_super_ddf Martin Wilck
2013-07-03 20:27 ` [PATCH 06/27] DDF: ddf_open_new: implement minimal consistency check mwilck
2013-07-03 20:27 ` [PATCH 07/27] DDF: find_vdcr: account for secondary RAID level mwilck
2013-07-08 6:16 ` NeilBrown
2013-07-08 21:03 ` Martin Wilck
2013-07-03 20:27 ` [PATCH 08/27] DDF: ddf_set_disk: move status logic to separate function mwilck
2013-07-03 20:27 ` [PATCH 09/27] DDF: get_svd_state: Status logic for secondary RAID level mwilck
2013-07-03 20:27 ` [PATCH 10/27] DDF: allow empty slots in virt disk table mwilck
2013-07-03 20:27 ` [PATCH 11/27] DDF: layout_ddf2md: new DDF->md RAID layout conversion mwilck
2013-07-08 6:48 ` NeilBrown
2013-07-08 21:06 ` Martin Wilck
2013-07-03 20:27 ` [PATCH 12/27] DDF: layout_md2ddf: new md->DDF " mwilck
2013-07-08 6:28 ` NeilBrown
2013-07-03 20:27 ` [PATCH 13/27] DDF: Simplify allocation of "other BVDs" mwilck
2013-07-03 20:27 ` [PATCH 14/27] DDF: init_super_ddf_bvd: initialize other bvds mwilck
2013-07-03 20:27 ` [PATCH 15/27] DDF: validate_geometry_ddf: support RAID10 mwilck
2013-07-03 20:27 ` [PATCH 16/27] DDF: use LBA_OFFSET macro instead of lba_offset field mwilck
2013-07-03 20:27 ` [PATCH 17/27] DDF: get_extents: support secondary RAID level mwilck
2013-07-03 20:27 ` [PATCH 18/27] DDF: add_to_super_ddf: allow empty slots in phys disk table mwilck
2013-07-03 20:27 ` [PATCH 19/27] DDF: add_to_super_ddf: Use same amount of workspace as other disks mwilck
2013-07-03 20:28 ` [PATCH 20/27] DDF: add_to_super_ddf: RAID10 changes mwilck
2013-07-03 20:28 ` [PATCH 21/27] DDF: add_to_super_ddf_bvd: use get_svd_state() mwilck
2013-07-03 20:28 ` [PATCH 22/27] DDF: getinfo_super_ddf_bvd: lba_offset calculation for RAID10 mwilck
2013-07-03 20:28 ` [PATCH 23/27] DDF: guid_str: convenience function to print GUID for debugging mwilck
2013-07-03 20:28 ` [PATCH 24/27] DDF: ddf_set_array_state: more meaningful output mwilck
2013-07-03 20:28 ` [PATCH 25/27] DDF: ddf_process_update: handle update of conf records for SVD mwilck
2013-07-03 20:28 ` [PATCH 26/27] DDF: ddf_process_update: Fix vlist treatment for SVDs mwilck
2013-07-03 20:28 ` [PATCH 27/27] tests/10ddf-create: add RAID 10 array mwilck
2013-07-04 10:10 ` DDF/RAID10 patch series NeilBrown
2013-07-08 6:53 ` NeilBrown
2013-07-08 21:50 ` Fixes for the DDF " mwilck
2013-07-08 21:50 ` [PATCH 28/39] test/10-ddf-create: fix comments mwilck
2013-07-08 21:50 ` [PATCH 29/39] Monitor: Don't write metadata in inactive array state mwilck
2013-07-08 21:50 ` [PATCH 30/39] DDF: write_init_super_ddf: don't zero superblocks for subarrays mwilck
2013-07-08 21:50 ` [PATCH 31/39] DDF: implement kill_subarray mwilck
2013-07-08 21:50 ` [PATCH 32/39] DDF: getinfo_super_ddf_bvd: identify disk by refnum mwilck
2013-07-08 21:50 ` [PATCH 33/39] DDF: getinfo_super_ddf_bvd: fix raid_disk calculation mwilck
2013-07-08 21:50 ` [PATCH 34/39] DDF: fix endianness of refnum in debug messages mwilck
2013-07-08 21:50 ` [PATCH 35/39] DDF: add debug message in add_super_ddf_bvd mwilck
2013-07-08 21:50 ` [PATCH 36/39] DDF: ddf_process_update: add debug messages fore adding VDs mwilck
2013-07-08 21:50 ` [PATCH 37/39] DDF: guid_str: more readable output mwilck
2013-07-08 21:50 ` [PATCH 38/39] DDF: ddf_process_update: some more debug messages mwilck
2013-07-08 21:50 ` [PATCH 39/39] DDF: ddf_process_update: Fix updates for SVDs mwilck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1374173341-9264-3-git-send-email-mwilck@arcor.de \
--to=mwilck@arcor.de \
--cc=linux-raid@vger.kernel.org \
--cc=neilb@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).