From: mwilck@arcor.de
To: neilb@suse.de, linux-raid@vger.kernel.org
Cc: mwilck@arcor.de
Subject: [PATCH] tests/env-ddf-template: helper for new unit test
Date: Wed, 31 Jul 2013 07:36:32 +0200 [thread overview]
Message-ID: <1375248992-7130-1-git-send-email-mwilck@arcor.de> (raw)
In-Reply-To: <1375219114-5626-11-git-send-email-mwilck@arcor.de>
From: Martin Wilck <mwilck@arcor.de>
I forgot to check in this helper script, similar to the one for IMSM.
It is needed by tests/10ddf-create-fail-rebuild.
Signed-off-by: Martin Wilck <mwilck@arcor.de>
---
tests/env-ddf-template | 76 ++++++++++++++++++++++++++++++++++++++++++++++++
1 files changed, 76 insertions(+), 0 deletions(-)
create mode 100644 tests/env-ddf-template
diff --git a/tests/env-ddf-template b/tests/env-ddf-template
new file mode 100644
index 0000000..28e19d0
--- /dev/null
+++ b/tests/env-ddf-template
@@ -0,0 +1,76 @@
+ddf_check() {
+ udevadm settle
+ case $1 in
+ container )
+ grep -s "blocks super external:ddf" /proc/mdstat > /dev/null || {
+ echo >&2 "**Fatal** Correctly formed container not found"; cat /proc/mdstat; exit 1; }
+ ;;
+ member )
+ t_member=$2
+ t_num_disks=$3
+ t_level=$4
+ t_rd_size=$5
+ t_size=$6
+ t_offset=$7
+ t_chunk=$8
+ t_layout=$9
+
+ if [ $t_chunk -ne 0 ]; then
+ t_rd_size=$((t_rd_size & ~(t_chunk - 1)))
+ fi
+ case $t_level in
+ 0) t_size=$((t_num_disks*$t_rd_size));;
+ 1) t_size=$t_rd_size;;
+ 4|5) t_size=$(((t_num_disks-1)*$t_rd_size));;
+ 6) t_size=$(((t_num_disks-2)*$t_rd_size));;
+ 10) t_size=$((t_num_disks*$t_rd_size/t_layout));;
+ esac
+
+ err=0
+
+ eval `stat -L -c "let major=0x%t; let minor=0x%T;" $t_member`
+ sysfs=/sys/dev/block/${major}:${minor}
+ if [ ! -f ${sysfs}/md/array_state ]; then
+ echo "**Fatal**: Array member $t_member not found" >&2; cat /proc/mdstat >&2; exit 1
+ fi
+ _chunk=`cat ${sysfs}/md/chunk_size`
+ if [ $t_chunk -ne $((_chunk/1024)) ]; then
+ echo "**Error**: Chunk size mismatch - expected $t_chunk, actual $_chunk" >&2
+ err=$((err + 1))
+ fi
+ for i in `seq 0 $((t_num_disks - 1))`; do
+ _offset=`cat ${sysfs}/md/rd${i}/offset`
+ if [ $t_offset -ne $((_offset / 2)) ]; then
+ echo "**Error**: Offset mismatch - expected $t_offset, actual $((_offset/2))" >&2
+ err=$((err + 1))
+ fi
+ _rd_size=`cat ${sysfs}/md/rd${i}/size`
+ if [ $t_rd_size -ne $_rd_size ]; then
+ echo "**Error**: Component size mismatch - expected $t_rd_size, actual $_rd_size" >&2
+ err=$((err + 1))
+ fi
+ done
+ _size=`cat ${sysfs}/md/array_size`
+ [ o$_size = odefault ] && _size=$(($(cat ${sysfs}/size)/2))
+ if [ $t_size -ne $_size ]; then
+ echo "**Error**: Array size mismatch - expected $t_size, actual $_size" >&2
+ err=$((err + 1))
+ fi
+ if [ $err -gt 0 ]; then
+ echo "$t_member failed check" >&2
+ cat /proc/mdstat >&2
+ mdadm -E /dev/loop8 >&2
+ exit 1
+ fi
+ ;;
+ * )
+ echo >&2 "**Error** unknown check $1"; exit 1;
+ esac
+}
+
+container=/dev/md/ddf
+member0=/dev/md/vol0
+member1=/dev/md/vol1
+member2=/dev/md/vol2
+member3=/dev/md/vol3
+member4=/dev/md/vol4
--
1.7.1
next prev parent reply other threads:[~2013-07-31 5:36 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-07-26 20:58 Suspicious test failure - mdmon misses recovery events on loop devices Martin Wilck
2013-07-29 6:55 ` NeilBrown
2013-07-29 20:39 ` Martin Wilck
2013-07-29 20:42 ` Martin Wilck
2013-07-30 0:42 ` NeilBrown
2013-07-30 21:16 ` Martin Wilck
2013-07-30 21:18 ` [PATCH 00/10] Two bug fixes and a lot of debug code mwilck
2013-07-31 3:10 ` NeilBrown
2013-07-30 21:18 ` [PATCH 01/10] DDF: ddf_activate_spare: bugfix for 62ff3c40 mwilck
2013-07-30 21:18 ` [PATCH 02/10] DDF: log disk status changes more nicely mwilck
2013-07-30 21:18 ` [PATCH 03/10] DDF: ddf_process_update: log offsets for conf changes mwilck
2013-07-30 21:18 ` [PATCH 04/10] DDF: load_ddf_header: more error logging mwilck
2013-07-30 21:18 ` [PATCH 05/10] DDF: ddf_set_disk: add some debug messages mwilck
2013-07-30 21:18 ` [PATCH 06/10] monitor: read_and_act: log status when called mwilck
2013-07-31 2:59 ` NeilBrown
2013-07-31 5:28 ` Martin Wilck
2013-07-30 21:18 ` [PATCH 07/10] mdmon: wait_and_act: fix debug message for SIGUSR1 mwilck
2013-07-30 21:18 ` [PATCH 08/10] mdmon: manage_member: debug messages for array state mwilck
2013-07-30 21:18 ` [PATCH 09/10] mdmon: manage_member: fix race condition during slow meta data writes mwilck
2013-07-30 21:18 ` [PATCH 10/10] tests/10ddf-create-fail-rebuild: new unit test for DDF mwilck
2013-07-31 5:36 ` mwilck [this message]
2013-07-31 6:49 ` [PATCH] tests/env-ddf-template: helper for new unit test NeilBrown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1375248992-7130-1-git-send-email-mwilck@arcor.de \
--to=mwilck@arcor.de \
--cc=linux-raid@vger.kernel.org \
--cc=neilb@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).