From: Guoqing Jiang <gqjiang@suse.com>
To: neilb@suse.de
Cc: linux-raid@vger.kernel.org, rgoldwyn@suse.com
Subject: [PATCH V3 04/11] Show all bitmaps while examining bitmap
Date: Wed, 20 May 2015 11:20:36 +0800 [thread overview]
Message-ID: <1432092043-24220-5-git-send-email-gqjiang@suse.com> (raw)
In-Reply-To: <1432092043-24220-1-git-send-email-gqjiang@suse.com>
This adds capability of exmining bitmaps corresponding to all
nodes/slots on the device.
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
---
bitmap.c | 72 ++++++++++++++++++++++++++++++++++++++++++++++++----------------
1 file changed, 54 insertions(+), 18 deletions(-)
diff --git a/bitmap.c b/bitmap.c
index 920033a..bccc67c 100644
--- a/bitmap.c
+++ b/bitmap.c
@@ -260,7 +260,7 @@ int ExamineBitmap(char *filename, int brief, struct supertype *st)
int rv = 1;
char buf[64];
int swap;
- int fd;
+ int fd, i;
__u32 uuid32[4];
fd = bitmap_file_open(filename, &st);
@@ -317,23 +317,59 @@ int ExamineBitmap(char *filename, int brief, struct supertype *st)
uuid32[2],
uuid32[3]);
- printf(" Events : %llu\n", (unsigned long long)sb->events);
- printf(" Events Cleared : %llu\n", (unsigned long long)sb->events_cleared);
- printf(" State : %s\n", bitmap_state(sb->state));
- printf(" Chunksize : %s\n", human_chunksize(sb->chunksize));
- printf(" Daemon : %ds flush period\n", sb->daemon_sleep);
- if (sb->write_behind)
- sprintf(buf, "Allow write behind, max %d", sb->write_behind);
- else
- sprintf(buf, "Normal");
- printf(" Write Mode : %s\n", buf);
- printf(" Sync Size : %llu%s\n", (unsigned long long)sb->sync_size/2,
- human_size(sb->sync_size * 512));
- if (brief)
- goto free_info;
- printf(" Bitmap : %llu bits (chunks), %llu dirty (%2.1f%%)\n",
- info->total_bits, info->dirty_bits,
- 100.0 * info->dirty_bits / (info->total_bits?:1));
+ if (sb->nodes == 0) {
+ printf(" Events : %llu\n", (unsigned long long)sb->events);
+ printf(" Events Cleared : %llu\n", (unsigned long long)sb->events_cleared);
+ printf(" State : %s\n", bitmap_state(sb->state));
+ printf(" Chunksize : %s\n", human_chunksize(sb->chunksize));
+ printf(" Daemon : %ds flush period\n", sb->daemon_sleep);
+ if (sb->write_behind)
+ sprintf(buf, "Allow write behind, max %d", sb->write_behind);
+ else
+ sprintf(buf, "Normal");
+ printf(" Write Mode : %s\n", buf);
+ printf(" Sync Size : %llu%s\n", (unsigned long long)sb->sync_size/2,
+ human_size(sb->sync_size * 512));
+ if (brief)
+ goto free_info;
+ printf(" Bitmap : %llu bits (chunks), %llu dirty (%2.1f%%)\n",
+ info->total_bits, info->dirty_bits,
+ 100.0 * info->dirty_bits / (info->total_bits?:1));
+ } else {
+ printf(" Chunksize : %s\n", human_chunksize(sb->chunksize));
+ printf(" Daemon : %ds flush period\n", sb->daemon_sleep);
+ if (sb->write_behind)
+ sprintf(buf, "Allow write behind, max %d", sb->write_behind);
+ else
+ sprintf(buf, "Normal");
+ printf(" Write Mode : %s\n", buf);
+ printf(" Sync Size : %llu%s\n", (unsigned long long)sb->sync_size/2,
+ human_size(sb->sync_size * 512));
+ printf(" Cluster nodes : %d\n", sb->nodes);
+ printf(" Cluster name : %s\n", sb->cluster_name);
+ i = 0;
+ do {
+ if (i) {
+ free(info);
+ info = bitmap_fd_read(fd, brief);
+ sb = &info->sb;
+ }
+ if (sb->magic != BITMAP_MAGIC)
+ pr_err("invalid bitmap magic 0x%x, the bitmap file appears to be corrupted\n", sb->magic);
+
+ printf(" Node Slot : %d\n", i);
+ printf(" Events : %llu\n", (unsigned long long)sb->events);
+ printf(" Events Cleared : %llu\n", (unsigned long long)sb->events_cleared);
+ printf(" State : %s\n", bitmap_state(sb->state));
+ if (brief)
+ continue;
+ printf(" Bitmap : %llu bits (chunks), %llu dirty (%2.1f%%)\n",
+ info->total_bits, info->dirty_bits,
+ 100.0 * info->dirty_bits / (info->total_bits?:1));
+
+ } while (++i < (int)sb->nodes);
+ }
+
free_info:
free(info);
return rv;
--
1.7.12.4
next prev parent reply other threads:[~2015-05-20 3:20 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-20 3:20 [PATCH V3 00/11] mdadm tool: add the support for cluster-md Guoqing Jiang
2015-05-20 3:20 ` [PATCH V3 01/11] Create n bitmaps for clustered mode Guoqing Jiang
2015-05-20 3:20 ` [PATCH V3 02/11] Add nodes option while creating md Guoqing Jiang
2015-05-25 4:13 ` NeilBrown
2015-05-20 3:20 ` [PATCH V3 03/11] home-cluster while creating an array Guoqing Jiang
2015-05-25 4:19 ` NeilBrown
2015-05-20 3:20 ` Guoqing Jiang [this message]
2015-05-25 4:23 ` [PATCH V3 04/11] Show all bitmaps while examining bitmap NeilBrown
2015-05-20 3:20 ` [PATCH V3 05/11] Add a new clustered disk Guoqing Jiang
2015-05-25 4:35 ` NeilBrown
2015-05-20 3:20 ` [PATCH V3 06/11] Convert a bitmap=none device to clustered Guoqing Jiang
2015-05-25 4:40 ` NeilBrown
2015-05-20 3:20 ` [PATCH V3 07/11] Skip clustered devices in incremental Guoqing Jiang
2015-05-20 3:20 ` [PATCH V3 08/11] mdadm: add the ability to change cluster name Guoqing Jiang
2015-05-25 4:53 ` NeilBrown
2015-05-26 8:38 ` Guoqing Jiang
2015-06-01 16:26 ` Goldwyn Rodrigues
2015-05-20 3:20 ` [PATCH V3 09/11] mdadm: change the num of cluster node Guoqing Jiang
2015-05-25 4:56 ` NeilBrown
2015-05-20 3:20 ` [PATCH V3 10/11] Reuse calc_bitmap_size to reduce code size Guoqing Jiang
2015-05-20 3:20 ` [PATCH V3 11/11] Reuse the write_bitmap for update uuid Guoqing Jiang
2015-05-25 4:59 ` NeilBrown
2015-05-25 5:03 ` [PATCH V3 00/11] mdadm tool: add the support for cluster-md NeilBrown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1432092043-24220-5-git-send-email-gqjiang@suse.com \
--to=gqjiang@suse.com \
--cc=linux-raid@vger.kernel.org \
--cc=neilb@suse.de \
--cc=rgoldwyn@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).