From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tomasz Majchrzak Subject: [PATCH] raid1: handle read error also in readonly mode Date: Fri, 28 Oct 2016 14:45:58 +0200 Message-ID: <1477658758-22637-1-git-send-email-tomasz.majchrzak@intel.com> Return-path: Sender: linux-raid-owner@vger.kernel.org To: linux-raid@vger.kernel.org Cc: shli@kernel.org, Tomasz Majchrzak List-Id: linux-raid.ids If write is the first operation on a disk and it happens not to be aligned to page size, block layer sends read request first. If read operation fails, the disk is set as failed as no attempt to fix the error is made because array is in auto-readonly mode. Similarily, the disk is set as failed for read-only array. Take the same approach as in raid10. Don't fail the disk if array is in readonly or auto-readonly mode. Try to redirect the request first and if unsuccessful, return a read error. Signed-off-by: Tomasz Majchrzak --- drivers/md/raid1.c | 19 ++++++++++--------- 1 file changed, 10 insertions(+), 9 deletions(-) diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c index db536a6..29e2df5 100644 --- a/drivers/md/raid1.c +++ b/drivers/md/raid1.c @@ -2297,17 +2297,23 @@ static void handle_read_error(struct r1conf *conf, struct r1bio *r1_bio) * This is all done synchronously while the array is * frozen */ + + bio = r1_bio->bios[r1_bio->read_disk]; + bdevname(bio->bi_bdev, b); + bio_put(bio); + r1_bio->bios[r1_bio->read_disk] = NULL; + if (mddev->ro == 0) { freeze_array(conf, 1); fix_read_error(conf, r1_bio->read_disk, r1_bio->sector, r1_bio->sectors); unfreeze_array(conf); - } else - md_error(mddev, conf->mirrors[r1_bio->read_disk].rdev); + } else { + r1_bio->bios[r1_bio->read_disk] = IO_BLOCKED; + } + rdev_dec_pending(conf->mirrors[r1_bio->read_disk].rdev, conf->mddev); - bio = r1_bio->bios[r1_bio->read_disk]; - bdevname(bio->bi_bdev, b); read_more: disk = read_balance(conf, r1_bio, &max_sectors); if (disk == -1) { @@ -2318,11 +2324,6 @@ static void handle_read_error(struct r1conf *conf, struct r1bio *r1_bio) } else { const unsigned long do_sync = r1_bio->master_bio->bi_opf & REQ_SYNC; - if (bio) { - r1_bio->bios[r1_bio->read_disk] = - mddev->ro ? IO_BLOCKED : NULL; - bio_put(bio); - } r1_bio->read_disk = disk; bio = bio_clone_mddev(r1_bio->master_bio, GFP_NOIO, mddev); bio_trim(bio, r1_bio->sector - bio->bi_iter.bi_sector, -- 1.8.3.1