From: NeilBrown <neilb@suse.com>
To: Shaohua Li <shli@kernel.org>
Cc: linux-raid@vger.kernel.org
Subject: [md PATCH 6/9] md/raid0: replace printk() with pr_*()
Date: Wed, 02 Nov 2016 14:16:50 +1100 [thread overview]
Message-ID: <147805660992.23566.9912952115762737883.stgit@noble> (raw)
In-Reply-To: <147805657658.23566.1748253447749986766.stgit@noble>
This makes md/raid0 much less verbose as the messages about
the array geometry are now pr_debug()
Signed-off-by: NeilBrown <neilb@suse.com>
---
drivers/md/raid0.c | 89 ++++++++++++++++++++++++++--------------------------
1 file changed, 44 insertions(+), 45 deletions(-)
diff --git a/drivers/md/raid0.c b/drivers/md/raid0.c
index 258986a2699d..b3ba77a3c3bc 100644
--- a/drivers/md/raid0.c
+++ b/drivers/md/raid0.c
@@ -51,20 +51,21 @@ static void dump_zones(struct mddev *mddev)
char b[BDEVNAME_SIZE];
struct r0conf *conf = mddev->private;
int raid_disks = conf->strip_zone[0].nb_dev;
- printk(KERN_INFO "md: RAID0 configuration for %s - %d zone%s\n",
- mdname(mddev),
- conf->nr_strip_zones, conf->nr_strip_zones==1?"":"s");
+ pr_debug("md: RAID0 configuration for %s - %d zone%s\n",
+ mdname(mddev),
+ conf->nr_strip_zones, conf->nr_strip_zones==1?"":"s");
for (j = 0; j < conf->nr_strip_zones; j++) {
- printk(KERN_INFO "md: zone%d=[", j);
+ char line[200];
+ int len = 0;
+
for (k = 0; k < conf->strip_zone[j].nb_dev; k++)
- printk(KERN_CONT "%s%s", k?"/":"",
- bdevname(conf->devlist[j*raid_disks
- + k]->bdev, b));
- printk(KERN_CONT "]\n");
+ len += snprintf(line+len, 200-len, "%s%s", k?"/":"",
+ bdevname(conf->devlist[j*raid_disks
+ + k]->bdev, b));
+ pr_debug("md: zone%d=[%s]\n", j, line);
zone_size = conf->strip_zone[j].zone_end - zone_start;
- printk(KERN_INFO " zone-offset=%10lluKB, "
- "device-offset=%10lluKB, size=%10lluKB\n",
+ pr_debug(" zone-offset=%10lluKB, device-offset=%10lluKB, size=%10lluKB\n",
(unsigned long long)zone_start>>1,
(unsigned long long)conf->strip_zone[j].dev_start>>1,
(unsigned long long)zone_size>>1);
@@ -142,9 +143,9 @@ static int create_strip_zones(struct mddev *mddev, struct r0conf **private_conf)
* chunk size is a multiple of that sector size
*/
if ((mddev->chunk_sectors << 9) % blksize) {
- printk(KERN_ERR "md/raid0:%s: chunk_size of %d not multiple of block size %d\n",
- mdname(mddev),
- mddev->chunk_sectors << 9, blksize);
+ pr_warn("md/raid0:%s: chunk_size of %d not multiple of block size %d\n",
+ mdname(mddev),
+ mddev->chunk_sectors << 9, blksize);
err = -EINVAL;
goto abort;
}
@@ -186,19 +187,18 @@ static int create_strip_zones(struct mddev *mddev, struct r0conf **private_conf)
}
if (j < 0) {
- printk(KERN_ERR
- "md/raid0:%s: remove inactive devices before converting to RAID0\n",
- mdname(mddev));
+ pr_warn("md/raid0:%s: remove inactive devices before converting to RAID0\n",
+ mdname(mddev));
goto abort;
}
if (j >= mddev->raid_disks) {
- printk(KERN_ERR "md/raid0:%s: bad disk number %d - "
- "aborting!\n", mdname(mddev), j);
+ pr_warn("md/raid0:%s: bad disk number %d - aborting!\n",
+ mdname(mddev), j);
goto abort;
}
if (dev[j]) {
- printk(KERN_ERR "md/raid0:%s: multiple devices for %d - "
- "aborting!\n", mdname(mddev), j);
+ pr_warn("md/raid0:%s: multiple devices for %d - aborting!\n",
+ mdname(mddev), j);
goto abort;
}
dev[j] = rdev1;
@@ -208,8 +208,8 @@ static int create_strip_zones(struct mddev *mddev, struct r0conf **private_conf)
cnt++;
}
if (cnt != mddev->raid_disks) {
- printk(KERN_ERR "md/raid0:%s: too few disks (%d of %d) - "
- "aborting!\n", mdname(mddev), cnt, mddev->raid_disks);
+ pr_warn("md/raid0:%s: too few disks (%d of %d) - aborting!\n",
+ mdname(mddev), cnt, mddev->raid_disks);
goto abort;
}
zone->nb_dev = cnt;
@@ -357,8 +357,7 @@ static int raid0_run(struct mddev *mddev)
int ret;
if (mddev->chunk_sectors == 0) {
- printk(KERN_ERR "md/raid0:%s: chunk size must be set.\n",
- mdname(mddev));
+ pr_warn("md/raid0:%s: chunk size must be set.\n", mdname(mddev));
return -EINVAL;
}
if (md_check_no_bitmap(mddev))
@@ -399,9 +398,9 @@ static int raid0_run(struct mddev *mddev)
/* calculate array device size */
md_set_array_sectors(mddev, raid0_size(mddev, 0, 0));
- printk(KERN_INFO "md/raid0:%s: md_size is %llu sectors.\n",
- mdname(mddev),
- (unsigned long long)mddev->array_sectors);
+ pr_debug("md/raid0:%s: md_size is %llu sectors.\n",
+ mdname(mddev),
+ (unsigned long long)mddev->array_sectors);
if (mddev->queue) {
/* calculate the max read-ahead size.
@@ -509,17 +508,17 @@ static void *raid0_takeover_raid45(struct mddev *mddev)
struct r0conf *priv_conf;
if (mddev->degraded != 1) {
- printk(KERN_ERR "md/raid0:%s: raid5 must be degraded! Degraded disks: %d\n",
- mdname(mddev),
- mddev->degraded);
+ pr_warn("md/raid0:%s: raid5 must be degraded! Degraded disks: %d\n",
+ mdname(mddev),
+ mddev->degraded);
return ERR_PTR(-EINVAL);
}
rdev_for_each(rdev, mddev) {
/* check slot number for a disk */
if (rdev->raid_disk == mddev->raid_disks-1) {
- printk(KERN_ERR "md/raid0:%s: raid5 must have missing parity disk!\n",
- mdname(mddev));
+ pr_warn("md/raid0:%s: raid5 must have missing parity disk!\n",
+ mdname(mddev));
return ERR_PTR(-EINVAL);
}
rdev->sectors = mddev->dev_sectors;
@@ -549,19 +548,19 @@ static void *raid0_takeover_raid10(struct mddev *mddev)
* - all mirrors must be already degraded
*/
if (mddev->layout != ((1 << 8) + 2)) {
- printk(KERN_ERR "md/raid0:%s:: Raid0 cannot takeover layout: 0x%x\n",
- mdname(mddev),
- mddev->layout);
+ pr_warn("md/raid0:%s:: Raid0 cannot takeover layout: 0x%x\n",
+ mdname(mddev),
+ mddev->layout);
return ERR_PTR(-EINVAL);
}
if (mddev->raid_disks & 1) {
- printk(KERN_ERR "md/raid0:%s: Raid0 cannot takeover Raid10 with odd disk number.\n",
- mdname(mddev));
+ pr_warn("md/raid0:%s: Raid0 cannot takeover Raid10 with odd disk number.\n",
+ mdname(mddev));
return ERR_PTR(-EINVAL);
}
if (mddev->degraded != (mddev->raid_disks>>1)) {
- printk(KERN_ERR "md/raid0:%s: All mirrors must be already degraded!\n",
- mdname(mddev));
+ pr_warn("md/raid0:%s: All mirrors must be already degraded!\n",
+ mdname(mddev));
return ERR_PTR(-EINVAL);
}
@@ -588,7 +587,7 @@ static void *raid0_takeover_raid1(struct mddev *mddev)
* - (N - 1) mirror drives must be already faulty
*/
if ((mddev->raid_disks - 1) != mddev->degraded) {
- printk(KERN_ERR "md/raid0:%s: (N - 1) mirrors drives must be already faulty!\n",
+ pr_err("md/raid0:%s: (N - 1) mirrors drives must be already faulty!\n",
mdname(mddev));
return ERR_PTR(-EINVAL);
}
@@ -631,8 +630,8 @@ static void *raid0_takeover(struct mddev *mddev)
*/
if (mddev->bitmap) {
- printk(KERN_ERR "md/raid0: %s: cannot takeover array with bitmap\n",
- mdname(mddev));
+ pr_warn("md/raid0: %s: cannot takeover array with bitmap\n",
+ mdname(mddev));
return ERR_PTR(-EBUSY);
}
if (mddev->level == 4)
@@ -642,8 +641,8 @@ static void *raid0_takeover(struct mddev *mddev)
if (mddev->layout == ALGORITHM_PARITY_N)
return raid0_takeover_raid45(mddev);
- printk(KERN_ERR "md/raid0:%s: Raid can only takeover Raid5 with layout: %d\n",
- mdname(mddev), ALGORITHM_PARITY_N);
+ pr_warn("md/raid0:%s: Raid can only takeover Raid5 with layout: %d\n",
+ mdname(mddev), ALGORITHM_PARITY_N);
}
if (mddev->level == 10)
@@ -652,7 +651,7 @@ static void *raid0_takeover(struct mddev *mddev)
if (mddev->level == 1)
return raid0_takeover_raid1(mddev);
- printk(KERN_ERR "Takeover from raid%i to raid0 not supported\n",
+ pr_warn("Takeover from raid%i to raid0 not supported\n",
mddev->level);
return ERR_PTR(-EINVAL);
next prev parent reply other threads:[~2016-11-02 3:16 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-02 3:16 [md PATCH 0/9] replace printk() with pr_*() NeilBrown
2016-11-02 3:16 ` [md PATCH 3/9] md/bitmap: change all printk() to pr_*() NeilBrown
2016-11-02 3:16 ` [md PATCH 1/9] md: fix some issues with alloc_disk_sb() NeilBrown
2016-11-02 3:16 ` [md PATCH 5/9] md/multipath: replace printk() with pr_*() NeilBrown
2016-11-02 3:16 ` [md PATCH 4/9] md/linear: " NeilBrown
2016-11-02 3:16 ` [md PATCH 2/9] md: change all printk() to pr_err() or pr_warn() etc NeilBrown
2016-11-02 3:16 ` [md PATCH 8/9] md/raid10: change printk() to pr_*() NeilBrown
2016-11-02 3:16 ` [md PATCH 9/9] md/raid5: " NeilBrown
2016-11-02 3:16 ` NeilBrown [this message]
2016-11-02 3:16 ` [md PATCH 7/9] md/raid1: " NeilBrown
2016-11-02 12:36 ` [md PATCH 0/9] replace printk() with pr_*() Hannes Reinecke
2016-11-02 21:14 ` NeilBrown
2016-11-04 21:36 ` Shaohua Li
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=147805660992.23566.9912952115762737883.stgit@noble \
--to=neilb@suse.com \
--cc=linux-raid@vger.kernel.org \
--cc=shli@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox