linux-raid.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Ming Lei <tom.leiming@gmail.com>
To: Shaohua Li <shli@kernel.org>, Jens Axboe <axboe@fb.com>,
	linux-raid@vger.kernel.org, linux-block@vger.kernel.org,
	Christoph Hellwig <hch@infradead.org>
Cc: Ming Lei <tom.leiming@gmail.com>
Subject: [PATCH v2 07/13] md: raid1: retrieve page from pre-allocated resync page array
Date: Tue, 28 Feb 2017 23:41:37 +0800	[thread overview]
Message-ID: <1488296503-4987-8-git-send-email-tom.leiming@gmail.com> (raw)
In-Reply-To: <1488296503-4987-1-git-send-email-tom.leiming@gmail.com>

Now one page array is allocated for each resync bio, and we can
retrieve page from this table directly.

Signed-off-by: Ming Lei <tom.leiming@gmail.com>
---
 drivers/md/raid1.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index 900144f39630..d0cb5c026506 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -1970,6 +1970,7 @@ static int fix_sync_read_error(struct r1bio *r1_bio)
 	struct mddev *mddev = r1_bio->mddev;
 	struct r1conf *conf = mddev->private;
 	struct bio *bio = r1_bio->bios[r1_bio->read_disk];
+	struct page **pages = get_resync_pages(bio)->pages;
 	sector_t sect = r1_bio->sector;
 	int sectors = r1_bio->sectors;
 	int idx = 0;
@@ -2003,7 +2004,7 @@ static int fix_sync_read_error(struct r1bio *r1_bio)
 				 */
 				rdev = conf->mirrors[d].rdev;
 				if (sync_page_io(rdev, sect, s<<9,
-						 bio->bi_io_vec[idx].bv_page,
+						 pages[idx],
 						 REQ_OP_READ, 0, false)) {
 					success = 1;
 					break;
@@ -2058,7 +2059,7 @@ static int fix_sync_read_error(struct r1bio *r1_bio)
 				continue;
 			rdev = conf->mirrors[d].rdev;
 			if (r1_sync_page_io(rdev, sect, s,
-					    bio->bi_io_vec[idx].bv_page,
+					    pages[idx],
 					    WRITE) == 0) {
 				r1_bio->bios[d]->bi_end_io = NULL;
 				rdev_dec_pending(rdev, mddev);
@@ -2073,7 +2074,7 @@ static int fix_sync_read_error(struct r1bio *r1_bio)
 				continue;
 			rdev = conf->mirrors[d].rdev;
 			if (r1_sync_page_io(rdev, sect, s,
-					    bio->bi_io_vec[idx].bv_page,
+					    pages[idx],
 					    READ) != 0)
 				atomic_add(s, &rdev->corrected_errors);
 		}
@@ -2149,6 +2150,8 @@ static void process_checks(struct r1bio *r1_bio)
 		struct bio *pbio = r1_bio->bios[primary];
 		struct bio *sbio = r1_bio->bios[i];
 		int error = sbio->bi_error;
+		struct page **ppages = get_resync_pages(pbio)->pages;
+		struct page **spages = get_resync_pages(sbio)->pages;
 
 		if (sbio->bi_end_io != end_sync_read)
 			continue;
@@ -2157,11 +2160,8 @@ static void process_checks(struct r1bio *r1_bio)
 
 		if (!error) {
 			for (j = vcnt; j-- ; ) {
-				struct page *p, *s;
-				p = pbio->bi_io_vec[j].bv_page;
-				s = sbio->bi_io_vec[j].bv_page;
-				if (memcmp(page_address(p),
-					   page_address(s),
+				if (memcmp(page_address(ppages[j]),
+					   page_address(spages[j]),
 					   sbio->bi_io_vec[j].bv_len))
 					break;
 			}
-- 
2.7.4


  parent reply	other threads:[~2017-02-28 15:41 UTC|newest]

Thread overview: 39+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-02-28 15:41 [PATCH v2 00/14] md: cleanup on direct access to bvec table Ming Lei
2017-02-28 15:41 ` [PATCH v2 01/13] block: introduce bio_segments_all() Ming Lei
2017-02-28 15:41 ` [PATCH v2 02/13] md: raid1/raid10: don't handle failure of bio_add_page() Ming Lei
2017-02-28 15:41 ` [PATCH v2 03/13] md: move two macros into md.h Ming Lei
2017-02-28 15:41 ` [PATCH v2 04/13] md: prepare for managing resync I/O pages in clean way Ming Lei
2017-02-28 23:30   ` Shaohua Li
2017-03-02  2:09     ` Ming Lei
2017-03-02 17:55       ` Shaohua Li
2017-03-03  1:54         ` Ming Lei
2017-02-28 15:41 ` [PATCH v2 05/13] md: raid1: simplify r1buf_pool_free() Ming Lei
2017-02-28 23:31   ` Shaohua Li
2017-03-02  2:11     ` Ming Lei
2017-03-02 17:49       ` Shaohua Li
2017-03-03  1:57         ` Ming Lei
2017-02-28 15:41 ` [PATCH v2 06/13] md: raid1: don't use bio's vec table to manage resync pages Ming Lei
2017-02-28 23:37   ` Shaohua Li
2017-03-02  2:25     ` Ming Lei
2017-03-02 17:48       ` Shaohua Li
2017-03-03  2:11         ` Ming Lei
2017-03-03 17:38           ` Shaohua Li
2017-02-28 15:41 ` Ming Lei [this message]
2017-02-28 15:41 ` [PATCH v2 08/13] md: raid1: use bio helper in process_checks() Ming Lei
2017-02-28 23:39   ` Shaohua Li
2017-02-28 15:41 ` [PATCH v2 09/13] md: raid1: use bio_segments_all() Ming Lei
2017-02-28 23:42   ` Shaohua Li
2017-03-02  2:34     ` Ming Lei
2017-03-02  7:52       ` Shaohua Li
2017-03-03  2:20         ` Ming Lei
2017-03-03  6:22           ` Ming Lei
2017-03-03 17:12             ` Shaohua Li
2017-02-28 15:41 ` [PATCH v2 10/13] md: raid10: refactor code of read reshape's .bi_end_io Ming Lei
2017-02-28 15:41 ` [PATCH v2 11/13] md: raid10: don't use bio's vec table to manage resync pages Ming Lei
2017-02-28 23:43   ` Shaohua Li
2017-02-28 15:41 ` [PATCH v2 12/13] md: raid10: retrieve page from preallocated resync page array Ming Lei
2017-02-28 15:41 ` [PATCH v2 13/13] md: raid10: avoid direct access to bvec table in handle_reshape_read_error Ming Lei
2017-02-28 23:46   ` Shaohua Li
2017-03-02  2:37     ` Ming Lei
2017-03-02  7:47       ` Shaohua Li
2017-03-03  2:30         ` Ming Lei

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1488296503-4987-8-git-send-email-tom.leiming@gmail.com \
    --to=tom.leiming@gmail.com \
    --cc=axboe@fb.com \
    --cc=hch@infradead.org \
    --cc=linux-block@vger.kernel.org \
    --cc=linux-raid@vger.kernel.org \
    --cc=shli@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).