From: Guoqing Jiang <gqjiang@suse.com>
To: linux-raid@vger.kernel.org
Cc: shli@fb.com, neilb@suse.com, Guoqing Jiang <gqjiang@suse.com>
Subject: [PATCH V1] md/raid10: refactor some codes from raid10_write_request
Date: Fri, 17 Mar 2017 17:45:17 +0800 [thread overview]
Message-ID: <1489743917-10895-1-git-send-email-gqjiang@suse.com> (raw)
Previously, we clone both bio and repl_bio in raid10_write_request,
then add the cloned bio to plug->pending or conf->pending_bio_list
based on plug or not, and most of the logics are same for the two
conditions.
So introduce raid10_write_one_disk for it, and use replacement parameter
to distinguish the difference. No functional changes in the patch.
Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
---
Changes from RFC:
1. rename handle_clonebio to raid10_write_one_disk
2. s/i/n_copy/ and s/int replacement/bool replacement/
drivers/md/raid10.c | 172 ++++++++++++++++++++++------------------------------
1 file changed, 72 insertions(+), 100 deletions(-)
diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c
index b1b1f982a722..a931e6e7b280 100644
--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -1188,18 +1188,81 @@ static void raid10_read_request(struct mddev *mddev, struct bio *bio,
return;
}
-static void raid10_write_request(struct mddev *mddev, struct bio *bio,
- struct r10bio *r10_bio)
+static void raid10_write_one_disk(struct mddev *mddev, struct r10bio *r10_bio,
+ struct bio *bio, bool replacement,
+ int n_copy, int max_sectors)
{
- struct r10conf *conf = mddev->private;
- int i;
const int op = bio_op(bio);
const unsigned long do_sync = (bio->bi_opf & REQ_SYNC);
const unsigned long do_fua = (bio->bi_opf & REQ_FUA);
unsigned long flags;
- struct md_rdev *blocked_rdev;
struct blk_plug_cb *cb;
struct raid10_plug_cb *plug = NULL;
+ struct r10conf *conf = mddev->private;
+ struct md_rdev *rdev;
+ int devnum = r10_bio->devs[i].devnum;
+ struct bio *mbio;
+
+ if (replacement) {
+ rdev = conf->mirrors[devnum].replacement;
+ if (rdev == NULL) {
+ /* Replacement just got moved to main 'rdev' */
+ smp_mb();
+ rdev = conf->mirrors[devnum].rdev;
+ }
+ } else
+ rdev = conf->mirrors[devnum].rdev;
+
+ mbio = bio_clone_fast(bio, GFP_NOIO, mddev->bio_set);
+ bio_trim(mbio, r10_bio->sector - bio->bi_iter.bi_sector, max_sectors);
+ if (replacement)
+ r10_bio->devs[i].repl_bio = mbio;
+ else
+ r10_bio->devs[i].bio = mbio;
+
+ mbio->bi_iter.bi_sector = (r10_bio->devs[i].addr +
+ choose_data_offset(r10_bio, rdev));
+ mbio->bi_bdev = rdev->bdev;
+ mbio->bi_end_io = raid10_end_write_request;
+ bio_set_op_attrs(mbio, op, do_sync | do_fua);
+ if (!replacement && test_bit(FailFast, &conf->mirrors[devnum].rdev->flags)
+ && enough(conf, devnum))
+ mbio->bi_opf |= MD_FAILFAST;
+ mbio->bi_private = r10_bio;
+
+ if (conf->mddev->gendisk)
+ trace_block_bio_remap(bdev_get_queue(mbio->bi_bdev),
+ mbio, disk_devt(conf->mddev->gendisk),
+ r10_bio->sector);
+ /* flush_pending_writes() needs access to the rdev so...*/
+ mbio->bi_bdev = (void *)rdev;
+
+ atomic_inc(&r10_bio->remaining);
+
+ cb = blk_check_plugged(raid10_unplug, mddev, sizeof(*plug));
+ if (cb)
+ plug = container_of(cb, struct raid10_plug_cb, cb);
+ else
+ plug = NULL;
+ spin_lock_irqsave(&conf->device_lock, flags);
+ if (plug) {
+ bio_list_add(&plug->pending, mbio);
+ plug->pending_cnt++;
+ } else {
+ bio_list_add(&conf->pending_bio_list, mbio);
+ conf->pending_count++;
+ }
+ spin_unlock_irqrestore(&conf->device_lock, flags);
+ if (!plug)
+ md_wakeup_thread(mddev->thread);
+}
+
+static void raid10_write_request(struct mddev *mddev, struct bio *bio,
+ struct r10bio *r10_bio)
+{
+ struct r10conf *conf = mddev->private;
+ int i;
+ struct md_rdev *blocked_rdev;
sector_t sectors;
int sectors_handled;
int max_sectors;
@@ -1402,101 +1465,10 @@ static void raid10_write_request(struct mddev *mddev, struct bio *bio,
bitmap_startwrite(mddev->bitmap, r10_bio->sector, r10_bio->sectors, 0);
for (i = 0; i < conf->copies; i++) {
- struct bio *mbio;
- int d = r10_bio->devs[i].devnum;
- if (r10_bio->devs[i].bio) {
- struct md_rdev *rdev = conf->mirrors[d].rdev;
- mbio = bio_clone_fast(bio, GFP_NOIO, mddev->bio_set);
- bio_trim(mbio, r10_bio->sector - bio->bi_iter.bi_sector,
- max_sectors);
- r10_bio->devs[i].bio = mbio;
-
- mbio->bi_iter.bi_sector = (r10_bio->devs[i].addr+
- choose_data_offset(r10_bio, rdev));
- mbio->bi_bdev = rdev->bdev;
- mbio->bi_end_io = raid10_end_write_request;
- bio_set_op_attrs(mbio, op, do_sync | do_fua);
- if (test_bit(FailFast, &conf->mirrors[d].rdev->flags) &&
- enough(conf, d))
- mbio->bi_opf |= MD_FAILFAST;
- mbio->bi_private = r10_bio;
-
- if (conf->mddev->gendisk)
- trace_block_bio_remap(bdev_get_queue(mbio->bi_bdev),
- mbio, disk_devt(conf->mddev->gendisk),
- r10_bio->sector);
- /* flush_pending_writes() needs access to the rdev so...*/
- mbio->bi_bdev = (void*)rdev;
-
- atomic_inc(&r10_bio->remaining);
-
- cb = blk_check_plugged(raid10_unplug, mddev,
- sizeof(*plug));
- if (cb)
- plug = container_of(cb, struct raid10_plug_cb,
- cb);
- else
- plug = NULL;
- spin_lock_irqsave(&conf->device_lock, flags);
- if (plug) {
- bio_list_add(&plug->pending, mbio);
- plug->pending_cnt++;
- } else {
- bio_list_add(&conf->pending_bio_list, mbio);
- conf->pending_count++;
- }
- spin_unlock_irqrestore(&conf->device_lock, flags);
- if (!plug)
- md_wakeup_thread(mddev->thread);
- }
-
- if (r10_bio->devs[i].repl_bio) {
- struct md_rdev *rdev = conf->mirrors[d].replacement;
- if (rdev == NULL) {
- /* Replacement just got moved to main 'rdev' */
- smp_mb();
- rdev = conf->mirrors[d].rdev;
- }
- mbio = bio_clone_fast(bio, GFP_NOIO, mddev->bio_set);
- bio_trim(mbio, r10_bio->sector - bio->bi_iter.bi_sector,
- max_sectors);
- r10_bio->devs[i].repl_bio = mbio;
-
- mbio->bi_iter.bi_sector = (r10_bio->devs[i].addr +
- choose_data_offset(r10_bio, rdev));
- mbio->bi_bdev = rdev->bdev;
- mbio->bi_end_io = raid10_end_write_request;
- bio_set_op_attrs(mbio, op, do_sync | do_fua);
- mbio->bi_private = r10_bio;
-
- if (conf->mddev->gendisk)
- trace_block_bio_remap(bdev_get_queue(mbio->bi_bdev),
- mbio, disk_devt(conf->mddev->gendisk),
- r10_bio->sector);
- /* flush_pending_writes() needs access to the rdev so...*/
- mbio->bi_bdev = (void*)rdev;
-
- atomic_inc(&r10_bio->remaining);
-
- cb = blk_check_plugged(raid10_unplug, mddev,
- sizeof(*plug));
- if (cb)
- plug = container_of(cb, struct raid10_plug_cb,
- cb);
- else
- plug = NULL;
- spin_lock_irqsave(&conf->device_lock, flags);
- if (plug) {
- bio_list_add(&plug->pending, mbio);
- plug->pending_cnt++;
- } else {
- bio_list_add(&conf->pending_bio_list, mbio);
- conf->pending_count++;
- }
- spin_unlock_irqrestore(&conf->device_lock, flags);
- if (!plug)
- md_wakeup_thread(mddev->thread);
- }
+ if (r10_bio->devs[i].bio)
+ raid10_write_one_disk(mddev, r10_bio, bio, false, i, max_sectors);
+ if (r10_bio->devs[i].repl_bio)
+ raid10_write_one_disk(mddev, r10_bio, bio, true, i, max_sectors);
}
/* Don't remove the bias on 'remaining' (one_write_done) until
--
2.6.2
next reply other threads:[~2017-03-17 9:45 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-03-17 9:45 Guoqing Jiang [this message]
2017-03-20 5:05 ` [PATCH V1] md/raid10: refactor some codes from raid10_write_request kbuild test robot
2017-03-20 8:28 ` Guoqing Jiang
2017-03-20 9:46 ` [PATCH V2] " Guoqing Jiang
2017-03-24 5:47 ` Shaohua Li
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1489743917-10895-1-git-send-email-gqjiang@suse.com \
--to=gqjiang@suse.com \
--cc=linux-raid@vger.kernel.org \
--cc=neilb@suse.com \
--cc=shli@fb.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).