From: Yuri Tikhonov <yur@emcraft.com>
To: Cheng Renquan <crquan@gmail.com>
Cc: Dan Williams <dan.j.williams@intel.com>,
linux-raid@vger.kernel.org, linuxppc-dev@ozlabs.org, dzu@denx.de,
wd@denx.de, yanok@emcraft.com
Subject: Re[2]: [PATCH 07/11] md: rewrite handle_stripe_dirtying6 in asynchronous way
Date: Fri, 16 Jan 2009 17:46:03 +0300 [thread overview]
Message-ID: <1675190812.20090116174603@emcraft.com> (raw)
In-Reply-To: <91b13c310901151707x48b1ef8av1609c3a622c19565@mail.gmail.com>
Hello Cheng,
On Friday, January 16, 2009 you wrote:
> Ack, could you please make the changelog more descriptive?
> and or add some of your benchmark results?
Of course. We did benchmarking using the Xdd tool like follows:
# xdd -op write -kbytes $kbytes -reqsize $reqsize -dio-passes 2 –verbose -target $target_device
where
$kbytes = data disks * size of disk
$reqsize= data disks * chunk size
$target_device = /dev/md0
This way we did write of full array size, and thus achieved the
maximum performance.
The test cases were RAID-6 built on the top of 14 S-ATA drives
connected to 2 LSI cards (7+7) inserted into the 800 MHz Katmai board
(based on ppc440spe) equipped with 4GB of 800 MHz DRAM .
Here are the results (Psw - write throughput with s/w RAID-6; Phw -
write throughput with the h/w accelerated RAID-6):
PAGE_SIZE=4KB, chunk=64/128/256 KB
Psw = 71/72/74 MBps
Phw = 128/136/139 MBps
PAGE_SIZE=16KB, chunk=256/512/1024 KB
Psw = 81/81/82 MBps
Phw = 205/244/239 MBps
PAGE_SIZE=64KB, chunk=1024/2048/4096 KB
Psw = 84/84/85 MBps
Phw = 258/253/258 MBps
PAGE_SIZE=256KB, chunk=4096/8192/16384 KB
Psw = 81/83/83 MBps
Phw = 288/275/274 MBps
Regards, Yuri
--
Yuri Tikhonov, Senior Software Engineer
Emcraft Systems, www.emcraft.com
--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2009-01-16 14:46 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-12-08 21:57 [PATCH 07/11] md: rewrite handle_stripe_dirtying6 in asynchronous way Yuri Tikhonov
2009-01-15 21:51 ` Dan Williams
2009-01-15 21:51 ` Dan Williams
[not found] ` <e9c3a7c20901151351p5e1b4641h1b4c8ba1ae5dcc73@mail.gmail.com>
2009-01-15 22:21 ` Dan Williams
2009-01-16 1:07 ` Cheng Renquan
2009-01-16 14:46 ` Yuri Tikhonov [this message]
2009-01-16 14:24 ` Re[2]: " Yuri Tikhonov
2009-01-16 18:39 ` Dan Williams
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1675190812.20090116174603@emcraft.com \
--to=yur@emcraft.com \
--cc=crquan@gmail.com \
--cc=dan.j.williams@intel.com \
--cc=dzu@denx.de \
--cc=linux-raid@vger.kernel.org \
--cc=linuxppc-dev@ozlabs.org \
--cc=wd@denx.de \
--cc=yanok@emcraft.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).