From mboxrd@z Thu Jan 1 00:00:00 1970 From: Iain Subject: Re: URGENT lilo problems Date: Wed, 24 Apr 2002 20:13:42 +1000 Sender: linux-raid-owner@vger.kernel.org Message-ID: <20020424101934Z311424-22651+15811@vger.kernel.org> References: <20020424090459Z310953-22651+15685@vger.kernel.org> <20020424115234.A30278@unthought.net> Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: QUOTED-PRINTABLE Return-path: In-Reply-To: <20020424115234.A30278@unthought.net> To: Jakob =?iso-8859-1?q?=D8stergaard?= Cc: linux-raid@vger.kernel.org List-Id: linux-raid.ids On Wed, 24 Apr 2002 07:52, Jakob =D8stergaard wrote: > > The map file is in /boot which is on /dev/md0 the partition I want = to > > boot from. > > Can you send /proc/mdstat and /etc/lilo.conf ? Ok the problem seems to have changed now. After reinstalling lilo and t= he=20 kernel I was able to use lilo. However, only the first hard drive will = =20 boot. If I disable the first hard drive and try and boot off the second= I get L 40 When I reinstalled LILO it installed a MBR on /dev/hda so now when lilo= boots=20 it shows MBR LILO 22.2 I'm not sure if this is right. Here is my lilo.conf lba32 boot=3D/dev/md0 root=3D/dev/md0 install=3D/boot/boot.b delay=3D20 map=3D/boot/map vga=3Dnormal image=3D/vmlinuz label=3DLinux read-only And cat /proc/mdstat candela:~# cat /proc/mdstat Personalities : [raid1] read_ahead 1024 sectors md0 : active raid1 hdc1[1] hda1[0] 192640 blocks [2/2] [UU] md1 : active raid1 hdc6[1] hda6[0] 2931712 blocks [2/2] [UU] md2 : active raid1 hdc7[1] hda7[0] 19534912 blocks [2/2] [UU] md3 : active raid1 hdc8[1] hda8[0] 15430336 blocks [2/2] [UU] unused devices: thanks, Iain. --=20 public key available at http://www.minihub.org/~iain/iain.asc - To unsubscribe from this list: send the line "unsubscribe linux-raid" i= n the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html