From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Marc" Subject: Re: Debian: how do I determine if RAID is working? Date: Fri, 30 Apr 2004 16:25:11 +0800 Sender: linux-raid-owner@vger.kernel.org Message-ID: <20040430082512.M46074@liquid-nexus.net> References: Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Return-path: In-Reply-To: To: linux-raid@vger.kernel.org List-Id: linux-raid.ids mdadm has a few options for examining the configuration/status of arrays. You can also 'cat /proc/mdstat' for a quick look at your raid array's status.. -- ---------- Original Message ----------- From: "Steve Dondley" To: Sent: Fri, 30 Apr 2004 01:47:58 -0400 Subject: Debian: how do I determine if RAID is working? > According to dmesg, the driver that I configured into my kernel for > my 3ware 7000 series controller card gets installed at boot time > with no errors. That's nice, but aside from disconnecting one of the > hard drives, how can I verify my RAID configuration is working? > > I'm running Debian (woody) kernel 2.4.18, raid 1 configuration on two > ATA/IDE hard drives. > > Thanks! > > - > To unsubscribe from this list: send the line "unsubscribe linux- > raid" in the body of a message to majordomo@vger.kernel.org More > majordomo info at http://vger.kernel.org/majordomo-info.html ------- End of Original Message -------