From mboxrd@z Thu Jan 1 00:00:00 1970 From: Sandro Dentella Subject: Re: Hung rebuilding Date: Thu, 30 Jun 2005 17:38:16 +0200 Message-ID: <20050630153816.GA17341@casa.e-den.it> References: <20050630134537.GA14145@casa.e-den.it> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: <20050630134537.GA14145@casa.e-den.it> Sender: linux-raid-owner@vger.kernel.org To: Linux Raid List List-Id: linux-raid.ids Following to the previous mail. I really need to recover the data in the array. I didn't think it was sure to fsck during a stuck reconstruction so I set faulty the disk that is probably faulty mdadm /dev/md3 --fail /dev/hda7 (devfs way really...) mdadm /dev/md3 --remove /dev/hda7 (devfs way really...) now I read srv-ornago:~# cat /proc/mdstat Personalities : [raid1] read_ahead 1024 sectors (...) md3 : active raid1 ide/host0/bus1/target0/lun0/part7[1] 74340672 blocks [2/1] [_U] [>....................] recovery = 0.0% (192/74340672) finish=328392.5min speed=0K/sec unused devices: so it is marked _U but is still under recovery!!! Is it safe to fsck now? (at least as w/ 1 single disk...) TIA sandro *:-) -- Sandro Dentella *:-) e-mail: sandro@e-den.it http://www.tksql.org TkSQL Home page - My GPL work