From mboxrd@z Thu Jan 1 00:00:00 1970 From: Luca Berra Subject: Re: heavy problem with raid initialisation Date: Fri, 10 Feb 2006 13:28:32 +0100 Message-ID: <20060210122832.GA20903@percy.comedia.it> References: <43EC66CC.4080001@inria.fr> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii; format=flowed Return-path: Content-Disposition: inline In-Reply-To: <43EC66CC.4080001@inria.fr> Sender: linux-raid-owner@vger.kernel.org To: Guillaume Rousse Cc: linux-raid@vger.kernel.org List-Id: linux-raid.ids On Fri, Feb 10, 2006 at 11:11:24AM +0100, Guillaume Rousse wrote: >Hello. > >I'm using software raid with mdadm 1.7.0 on a mandrake linux 10.1, but >I'm facing heavy initialisation troubles. The first array /dev/md0 is >automatically created and launched at startup (though mdadm -As in init >scripts), but not the second array /dev/md1. > >mdadm --examine --scan --config=partitions creates the second array as >/dev/.tmp.md1, which I can then assemble using an explicit mdadm -A >/dev/sda2 /dev/sdb2 command, but this is unpractical and failproof :/ > i think this issue was squashed in a newer version of mdadm can you try rebuilding the current cooker rpm on 10.1 and try again. i don't have a 10.1 laying around to test atm. L. -- Luca Berra -- bluca@comedia.it Communication Media & Services S.r.l. /"\ \ / ASCII RIBBON CAMPAIGN X AGAINST HTML MAIL / \