* copying data over NFS to raid5 array is jumpy
@ 2006-05-17 21:38 Dexter Filmore
0 siblings, 0 replies; only message in thread
From: Dexter Filmore @ 2006-05-17 21:38 UTC (permalink / raw)
To: linux-raid
copying from a local standalone disk to a raid5 array works smooth at a
constant 30MB/s. So far, so good.
Now, copying data from a machine on the network over 100MBit NFS is kinda
jerky. It works, but within a second or two, the transfer rate reported goes
from a few 100k/s up to 22MB/s (which is bogus - 100MBit=12.5MB/s max) and
back, varying all over.
Copying to the single disk works is constant around 10MB/s.
I use "sync" in exportfs for all shares.
What could cause this behaviour?
--
-----BEGIN GEEK CODE BLOCK-----
Version: 3.12
GCS d--(+)@ s-:+ a- C+++(++++) UL+>++++ P+>++ L+++>++++ E-- W++ N o? K-
w--(---) !O M+ V- PS++(+) PE(-) Y++ PGP t++(---)@ 5 X+(++) R+(++) tv--(+)@
b++(+++) DI+++ D G++ e* h>++ r%>* y?
------END GEEK CODE BLOCK------
http://www.stop1984.com
http://www.againsttcpa.com
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2006-05-17 21:38 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2006-05-17 21:38 copying data over NFS to raid5 array is jumpy Dexter Filmore
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).