resize new raid problem

resize new raid problem

[Serge Torop]

Hello, all.

I need to install softw. RAID1 to working RedHat EL4.


I used "rescue mode" for creating RAID arrays.

what do I do?:

1. install my own initrd for normal booting
2. change the disk partition type to "Linux Auroraid"
on /dev/hda, dev/hdc

3. create RAID1, by using "mkraid --really-force /dev/md2"

I need to resize new /dev/md0 after creating, for this I use:

resize2fs /dev/md2 and see a error messge:

resize2fs 1.39
/resize2fs: relocation error: - /resize2fs: undefined symbol: ext2fs_open2

Can I resolve this problem (resize2fs bug?)?
(may be using mdadm?)


ps. this bug I found in RHEL4, on RHEL3, Redhat9 all was ok.
-- 

Serge P. Torop
St.Petersburg, Russia

Re: resize new raid problem

[Luca Berra]

On Wed, Aug 09, 2006 at 01:55:56PM +0400, Serge Torop wrote:
>I need to install softw. RAID1 to working RedHat EL4.
>
>I used "rescue mode" for creating RAID arrays.
...
>resize2fs /dev/md2 and see a error messge:
>
>resize2fs 1.39
>/resize2fs: relocation error: - /resize2fs: undefined symbol: ext2fs_open2
>
>Can I resolve this problem (resize2fs bug?)?
>(may be using mdadm?)
>
since you bought a commercial product from redhat you might be better
open a support call to them.
if the resize2fs binary you are using comes from EL4, that is.

L.

-- 
Luca Berra -- bluca@comedia.it
        Communication Media & Services S.r.l.
 /"\
 \ /     ASCII RIBBON CAMPAIGN
  X        AGAINST HTML MAIL
 / \