From mboxrd@z Thu Jan 1 00:00:00 1970 From: Dexter Filmore Subject: Re: Slackware and RAID Date: Sat, 16 Sep 2006 20:32:07 +0200 Message-ID: <200609162032.07509.Dexter.Filmore@gmx.de> References: <200609161230.22530.Dexter.Filmore@gmx.de> <450C33BA.2000208@tmr.com> Mime-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <450C33BA.2000208@tmr.com> Content-Disposition: inline Sender: linux-raid-owner@vger.kernel.org To: Bill Davidsen Cc: linux-raid@vger.kernel.org List-Id: linux-raid.ids Am Samstag, 16. September 2006 19:26 schrieb Bill Davidsen: > Dexter Filmore wrote: > >Is anyone here who runs a soft raid on Slackware? > >Out of the box there are no raid scripts, the ones I made myself seem a > > little rawish, barely more than mdadm --assemble/--stop. > > I'm pretty much off Slack now, but I have run, the scripts you describe > are about 2/3 of what you need, see the thread(s) here about monitoring. > mdadm doesn't need a lot of direction... What's the remaining third? I fumbled it into rc.S and rc.6, reason why I ask is that array degraded about 6 times in the few months I run it and I can't figure why. Only thing I know is that it degrades somewhere in the reboot process, so I suspect it might not properly shutdown. Dex -- -----BEGIN GEEK CODE BLOCK----- Version: 3.12 GCS d--(+)@ s-:+ a- C++++ UL++ P+>++ L+++>++++ E-- W++ N o? K- w--(---) !O M+ V- PS+ PE Y++ PGP t++(---)@ 5 X+(++) R+(++) tv--(+)@ b++(+++) DI+++ D- G++ e* h>++ r* y? ------END GEEK CODE BLOCK------ http://www.stop1984.com http://www.againsttcpa.com