From: Dan Williams <dan.j.williams@intel.com>
To: neilb@suse.de, linux-raid@vger.kernel.org
Cc: johnpol@2ka.mipt.ru, christopher.leech@intel.com,
arjan@infradead.org, linux-kernel@vger.kernel.org
Subject: [PATCH 08/12] md: satisfy raid5 read requests via raid5_run_ops
Date: Mon, 22 Jan 2007 20:29:35 -0700 [thread overview]
Message-ID: <20070123032935.29114.89760.stgit@dwillia2-linux.ch.intel.com> (raw)
In-Reply-To: <1169522364.8362.113.camel@dwillia2-linux.ch.intel.com>
From: Dan Williams <dan.j.williams@intel.com>
Use raid5_run_ops to carry out the memory copies for a raid5 read request.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
---
drivers/md/raid5.c | 40 +++++++++++++++-------------------------
1 files changed, 15 insertions(+), 25 deletions(-)
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index 2422253..db8925f 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -1980,7 +1980,7 @@ static void handle_stripe5(struct stripe_head *sh)
int i;
int syncing, expanding, expanded;
int locked=0, uptodate=0, to_read=0, to_write=0, failed=0, written=0;
- int compute=0, req_compute=0, non_overwrite=0;
+ int to_fill=0, compute=0, req_compute=0, non_overwrite=0;
int failed_num=0;
struct r5dev *dev;
unsigned long pending=0;
@@ -2004,34 +2004,20 @@ static void handle_stripe5(struct stripe_head *sh)
dev = &sh->dev[i];
clear_bit(R5_Insync, &dev->flags);
- PRINTK("check %d: state 0x%lx read %p write %p written %p\n",
- i, dev->flags, dev->toread, dev->towrite, dev->written);
- /* maybe we can reply to a read */
+ PRINTK("check %d: state 0x%lx toread %p read %p write %p written %p\n",
+ i, dev->flags, dev->toread, dev->read, dev->towrite, dev->written);
+
+ /* maybe we can start a biofill operation */
if (test_bit(R5_UPTODATE, &dev->flags) && dev->toread) {
- struct bio *rbi, *rbi2;
- PRINTK("Return read for disc %d\n", i);
- spin_lock_irq(&conf->device_lock);
- rbi = dev->toread;
- dev->toread = NULL;
- if (test_and_clear_bit(R5_Overlap, &dev->flags))
- wake_up(&conf->wait_for_overlap);
- spin_unlock_irq(&conf->device_lock);
- while (rbi && rbi->bi_sector < dev->sector + STRIPE_SECTORS) {
- copy_data(0, rbi, dev->page, dev->sector);
- rbi2 = r5_next_bio(rbi, dev->sector);
- spin_lock_irq(&conf->device_lock);
- if (--rbi->bi_phys_segments == 0) {
- rbi->bi_next = return_bi;
- return_bi = rbi;
- }
- spin_unlock_irq(&conf->device_lock);
- rbi = rbi2;
- }
+ to_read--;
+ if (!test_bit(STRIPE_OP_BIOFILL, &sh->ops.pending))
+ set_bit(R5_Wantfill, &dev->flags);
}
/* now count some things */
if (test_bit(R5_LOCKED, &dev->flags)) locked++;
if (test_bit(R5_UPTODATE, &dev->flags)) uptodate++;
+ if (test_bit(R5_Wantfill, &dev->flags)) to_fill++;
if (test_bit(R5_Wantcompute, &dev->flags)) BUG_ON(++compute > 1);
if (dev->toread) to_read++;
@@ -2055,9 +2041,13 @@ static void handle_stripe5(struct stripe_head *sh)
set_bit(R5_Insync, &dev->flags);
}
rcu_read_unlock();
+
+ if (to_fill && !test_and_set_bit(STRIPE_OP_BIOFILL, &sh->ops.pending))
+ sh->ops.count++;
+
PRINTK("locked=%d uptodate=%d to_read=%d"
- " to_write=%d failed=%d failed_num=%d\n",
- locked, uptodate, to_read, to_write, failed, failed_num);
+ " to_write=%d to_fill=%d failed=%d failed_num=%d\n",
+ locked, uptodate, to_read, to_write, to_fill, failed, failed_num);
/* check if the array has lost two devices and, if so, some requests might
* need to be failed
*/
next prev parent reply other threads:[~2007-01-23 3:29 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1169522364.8362.113.camel@dwillia2-linux.ch.intel.com>
2007-01-23 3:28 ` [PATCH 01/12] dmaengine: add base support for the async_tx api Dan Williams
2007-01-23 3:29 ` [PATCH 02/12] dmaengine: add " Dan Williams
2007-01-23 3:29 ` [PATCH 03/12] md: add raid5_run_ops and support routines Dan Williams
2007-01-23 3:29 ` [PATCH 04/12] md: use raid5_run_ops for stripe cache operations Dan Williams
2007-01-23 3:29 ` [PATCH 05/12] md: move write operations to raid5_run_ops Dan Williams
2007-01-23 3:29 ` [PATCH 06/12] md: move raid5 compute block " Dan Williams
2007-01-23 3:29 ` [PATCH 07/12] md: move raid5 parity checks " Dan Williams
2007-01-23 3:29 ` Dan Williams [this message]
2007-01-23 3:29 ` [PATCH 09/12] md: use async_tx and raid5_run_ops for raid5 expansion operations Dan Williams
2007-01-23 3:29 ` [PATCH 10/12] md: move raid5 io requests to raid5_run_ops Dan Williams
2007-01-23 3:29 ` [PATCH 11/12] md: remove raid5 compute_block and compute_parity5 Dan Williams
2007-01-23 3:29 ` [PATCH 12/12] dmaengine: driver for the iop32x, iop33x, and iop13xx raid engines Dan Williams
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20070123032935.29114.89760.stgit@dwillia2-linux.ch.intel.com \
--to=dan.j.williams@intel.com \
--cc=arjan@infradead.org \
--cc=christopher.leech@intel.com \
--cc=johnpol@2ka.mipt.ru \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-raid@vger.kernel.org \
--cc=neilb@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).