From: Dan Williams <dan.j.williams@intel.com>
To: neilb@suse.de, akpm@linux-foundation.org, christopher.leech@intel.com
Cc: linux-kernel@vger.kernel.org, linux-raid@vger.kernel.org
Subject: [PATCH 13/16] md: remove raid5 compute_block and compute_parity5
Date: Tue, 01 May 2007 23:21:11 -0700 [thread overview]
Message-ID: <20070502062111.7066.17692.stgit@dwillia2-linux.ch.intel.com> (raw)
In-Reply-To: <20070502060949.7066.357.stgit@dwillia2-linux.ch.intel.com>
replaced by raid5_run_ops
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
---
drivers/md/raid5.c | 124 ----------------------------------------------------
1 files changed, 0 insertions(+), 124 deletions(-)
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index c9b91e3..74ce354 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -1501,130 +1501,6 @@ static void copy_data(int frombio, struct bio *bio,
} \
} while(0)
-
-static void compute_block(struct stripe_head *sh, int dd_idx)
-{
- int i, count, disks = sh->disks;
- void *ptr[MAX_XOR_BLOCKS], *dest, *p;
-
- PRINTK("compute_block, stripe %llu, idx %d\n",
- (unsigned long long)sh->sector, dd_idx);
-
- dest = page_address(sh->dev[dd_idx].page);
- memset(dest, 0, STRIPE_SIZE);
- count = 0;
- for (i = disks ; i--; ) {
- if (i == dd_idx)
- continue;
- p = page_address(sh->dev[i].page);
- if (test_bit(R5_UPTODATE, &sh->dev[i].flags))
- ptr[count++] = p;
- else
- printk(KERN_ERR "compute_block() %d, stripe %llu, %d"
- " not present\n", dd_idx,
- (unsigned long long)sh->sector, i);
-
- check_xor();
- }
- if (count)
- xor_block(count, STRIPE_SIZE, dest, ptr);
- set_bit(R5_UPTODATE, &sh->dev[dd_idx].flags);
-}
-
-static void compute_parity5(struct stripe_head *sh, int method)
-{
- raid5_conf_t *conf = sh->raid_conf;
- int i, pd_idx = sh->pd_idx, disks = sh->disks, count;
- void *ptr[MAX_XOR_BLOCKS], *dest;
- struct bio *chosen;
-
- PRINTK("compute_parity5, stripe %llu, method %d\n",
- (unsigned long long)sh->sector, method);
-
- count = 0;
- dest = page_address(sh->dev[pd_idx].page);
- switch(method) {
- case READ_MODIFY_WRITE:
- BUG_ON(!test_bit(R5_UPTODATE, &sh->dev[pd_idx].flags));
- for (i=disks ; i-- ;) {
- if (i==pd_idx)
- continue;
- if (sh->dev[i].towrite &&
- test_bit(R5_UPTODATE, &sh->dev[i].flags)) {
- ptr[count++] = page_address(sh->dev[i].page);
- chosen = sh->dev[i].towrite;
- sh->dev[i].towrite = NULL;
-
- if (test_and_clear_bit(R5_Overlap, &sh->dev[i].flags))
- wake_up(&conf->wait_for_overlap);
-
- BUG_ON(sh->dev[i].written);
- sh->dev[i].written = chosen;
- check_xor();
- }
- }
- break;
- case RECONSTRUCT_WRITE:
- memset(dest, 0, STRIPE_SIZE);
- for (i= disks; i-- ;)
- if (i!=pd_idx && sh->dev[i].towrite) {
- chosen = sh->dev[i].towrite;
- sh->dev[i].towrite = NULL;
-
- if (test_and_clear_bit(R5_Overlap, &sh->dev[i].flags))
- wake_up(&conf->wait_for_overlap);
-
- BUG_ON(sh->dev[i].written);
- sh->dev[i].written = chosen;
- }
- break;
- case CHECK_PARITY:
- break;
- }
- if (count) {
- xor_block(count, STRIPE_SIZE, dest, ptr);
- count = 0;
- }
-
- for (i = disks; i--;)
- if (sh->dev[i].written) {
- sector_t sector = sh->dev[i].sector;
- struct bio *wbi = sh->dev[i].written;
- while (wbi && wbi->bi_sector < sector + STRIPE_SECTORS) {
- copy_data(1, wbi, sh->dev[i].page, sector);
- wbi = r5_next_bio(wbi, sector);
- }
-
- set_bit(R5_LOCKED, &sh->dev[i].flags);
- set_bit(R5_UPTODATE, &sh->dev[i].flags);
- }
-
- switch(method) {
- case RECONSTRUCT_WRITE:
- case CHECK_PARITY:
- for (i=disks; i--;)
- if (i != pd_idx) {
- ptr[count++] = page_address(sh->dev[i].page);
- check_xor();
- }
- break;
- case READ_MODIFY_WRITE:
- for (i = disks; i--;)
- if (sh->dev[i].written) {
- ptr[count++] = page_address(sh->dev[i].page);
- check_xor();
- }
- }
- if (count)
- xor_block(count, STRIPE_SIZE, dest, ptr);
-
- if (method != CHECK_PARITY) {
- set_bit(R5_UPTODATE, &sh->dev[pd_idx].flags);
- set_bit(R5_LOCKED, &sh->dev[pd_idx].flags);
- } else
- clear_bit(R5_UPTODATE, &sh->dev[pd_idx].flags);
-}
-
static void compute_parity6(struct stripe_head *sh, int method)
{
raid6_conf_t *conf = sh->raid_conf;
next prev parent reply other threads:[~2007-05-02 6:21 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-05-02 6:14 [PATCH 00/16] raid acceleration and asynchronous offload api for 2.6.22 Dan Williams
2007-05-02 6:15 ` [PATCH 01/16] dmaengine: add base support for the async_tx api Dan Williams
2007-05-02 6:15 ` [PATCH 02/16] dmaengine: move channel management to the client Dan Williams
2007-05-02 6:16 ` [PATCH 03/16] ARM: Add drivers/dma to arch/arm/Kconfig Dan Williams
2007-05-02 6:16 ` [PATCH 04/16] dmaengine: add the async_tx api Dan Williams
2007-05-02 6:17 ` [PATCH 05/16] md: add raid5_run_ops and support routines Dan Williams
2007-05-02 6:17 ` [PATCH 06/16] md: use raid5_run_ops for stripe cache operations Dan Williams
2007-05-02 6:18 ` [PATCH 07/16] md: move write operations to raid5_run_ops Dan Williams
2007-05-02 6:18 ` [PATCH 08/16] md: move raid5 compute block " Dan Williams
2007-05-02 6:19 ` [PATCH 09/16] md: move raid5 parity checks " Dan Williams
2007-05-02 6:19 ` [PATCH 10/16] md: satisfy raid5 read requests via raid5_run_ops Dan Williams
2007-05-02 6:20 ` [PATCH 11/16] md: use async_tx and raid5_run_ops for raid5 expansion operations Dan Williams
2007-05-02 6:20 ` [PATCH 12/16] md: move raid5 io requests to raid5_run_ops Dan Williams
2007-05-02 6:21 ` Dan Williams [this message]
2007-05-02 6:21 ` [PATCH 14/16] dmaengine: driver for the iop32x, iop33x, and iop13xx raid engines Dan Williams
2007-05-02 6:22 ` [PATCH 15/16] iop13xx: Surface the iop13xx adma units to the iop-adma driver Dan Williams
2007-05-02 6:22 ` [PATCH 16/16] iop3xx: Surface the iop3xx DMA and AAU " Dan Williams
2007-05-02 6:55 ` [PATCH 00/16] raid acceleration and asynchronous offload api for 2.6.22 Nick Piggin
2007-05-02 15:45 ` Williams, Dan J
2007-05-02 15:55 ` Justin Piszcz
2007-05-02 16:17 ` Williams, Dan J
2007-05-02 16:19 ` Justin Piszcz
2007-05-02 16:36 ` Dagfinn Ilmari Mannsåker
2007-05-02 16:42 ` Williams, Dan J
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20070502062111.7066.17692.stgit@dwillia2-linux.ch.intel.com \
--to=dan.j.williams@intel.com \
--cc=akpm@linux-foundation.org \
--cc=christopher.leech@intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-raid@vger.kernel.org \
--cc=neilb@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).