From mboxrd@z Thu Jan 1 00:00:00 1970 From: Janek Kozicki Subject: Re: Auto generation of mdadm.conf Date: Tue, 5 Feb 2008 19:39:39 +0100 Message-ID: <20080205193939.27a3d974@szpak> References: <200802051142.19625.admin@domeny.pl> <20080205132717.238c4312@szpak> <47A86A12.2090405@msgid.tls.msk.ru> <20080205154713.0ccae001@szpak> <47A88217.8070003@msgid.tls.msk.ru> Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <47A88217.8070003@msgid.tls.msk.ru> Sender: linux-raid-owner@vger.kernel.org Cc: linux-raid@vger.kernel.org List-Id: linux-raid.ids Michael Tokarev said: (by the date of Tue, 05 Feb 2008 18:34:47 +0300) <...> > So.. probably this is the way your arrays are being assembled, since you > do have HOMEHOST in your mdadm.conf... Looks like it should work, after > all... ;) And in this case there's no need to specify additional array > information in the config file. whew, that was a long read. Thanks for detailed analysis. I hope that your conclusion is correct, since I have no way to decide this by myself. My knowledge is not enough here :) best regards -- Janek Kozicki |