From mboxrd@z Thu Jan 1 00:00:00 1970 From: Keld =?iso-8859-1?Q?J=F8rn?= Simonsen Subject: Re: draft howto on making raids for surviving a disk crash Date: Wed, 6 Feb 2008 16:45:39 +0100 Message-ID: <20080206154538.GC16090@rap.rap.dk> References: <20080202194131.GA7875@rap.rap.dk> <20080206090557.GA19764@percy.comedia.it> Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: QUOTED-PRINTABLE Return-path: Content-Disposition: inline In-Reply-To: <20080206090557.GA19764@percy.comedia.it> Sender: linux-raid-owner@vger.kernel.org To: linux-raid@vger.kernel.org List-Id: linux-raid.ids On Wed, Feb 06, 2008 at 10:05:58AM +0100, Luca Berra wrote: > On Sat, Feb 02, 2008 at 08:41:31PM +0100, Keld J=F8rn Simonsen wrote: > >Make each of the disks bootable by lilo: > > > > lilo -b /dev/sda /etc/lilo.conf1 > > lilo -b /dev/sdb /etc/lilo.conf2 > There should be no need for that. > to achieve the above effect with lilo you use > raid-extra-boot=3Dmbr-only > in lilo.conf >=20 > >Make each of the disks bootable by grub > install grub with the command > grub-install /dev/md0 I have already changed the text on the wiki. Still I am not convinced i= t=20 is the best advice that is described. best regards keld - To unsubscribe from this list: send the line "unsubscribe linux-raid" i= n the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html