From mboxrd@z Thu Jan 1 00:00:00 1970 From: Keld =?iso-8859-1?Q?J=F8rn?= Simonsen Subject: Re: Grow a RAID-10 Date: Thu, 3 Jul 2008 01:10:26 +0200 Message-ID: <20080702231026.GA15028@rap.rap.dk> References: <486BF974.70508@amfes.com> Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Return-path: Content-Disposition: inline In-Reply-To: <486BF974.70508@amfes.com> Sender: linux-raid-owner@vger.kernel.org To: "Daniel L. Miller" Cc: linux-raid@vger.kernel.org List-Id: linux-raid.ids On Wed, Jul 02, 2008 at 02:56:04PM -0700, Daniel L. Miller wrote: > I currently have a RAID10 across (4) SATA drives. It looks like I'm > going to need to grow in the near future. Any tips for a procedure for > this? My current plan: > > 1. Add a PCI SATA controller (MB had 4 SATA + 4 RAID SATA, it's a Tyan > MB with a NFORCE chipset, I'm not sure if I want/can use the RAID SATA > ports as plain SATA connections). Why not use the mobo raid sata ports? They are probably faster than a controller on the pci bus. What kind of pci bus do you have? PCI-E 1x is likely to be too slow for a 4-drive raid10,f2 array. My 4-drive raid10,f2 delivers about 320 MB/s and newer disks should be able to deliver 360 MB/s - well above the 250 MB/s that a PCI-E 1x can deliver. > 2. Add 2 more drives - not necessarily the same size as the existing > (they were all 4 the same) > > 3. Execute "mdadm --grow /dev/md0" What kind of raid10 do you have?> Best regards keld