linux-raid.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Harry Mangalam <harry.mangalam@uci.edu>
To: Ryan Wagoner <rswagoner@gmail.com>
Cc: hgichon <kpkim@gluesys.com>, linux-raid <linux-raid@vger.kernel.org>
Subject: Re: rescue an alien md raid5
Date: Sat, 14 Mar 2009 10:15:58 -0800	[thread overview]
Message-ID: <200903141115.59105.harry.mangalam@uci.edu> (raw)
In-Reply-To: <7d86ddb90903140712v358c170bq554e9fd963099a1@mail.gmail.com>

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset=utf-8, Size: 2800 bytes --]

I mentioned the OSS layer because if LVM was involved, it would have 
been included in the GPL'ed SW listing.

As noted, there's no LVM software in the GPL listing, and none of the 
commands were found on the NAS device - it can be telnet'ed into, but 
has a limited set of tools available (busybox and not much else 
besides mdadm)

I've since found out that the data on the RAID was a set of VM images 
that were recoverable via other means so I'm stopping my efforts to 
restore it.  

It was an interesting diversion tho and I thank all of the comments 
and suggestions.  I've learned a lot.

Harry


On Saturday 14 March 2009, Ryan Wagoner wrote:
> No LVM has no correlation with mdadm. LVM stands for logical volume
> manager and lets you dynamically partition space on top of a real
> partition. Try running the commands below. If LVM is not used it
> won't affect the data on the disk. If it is used then your problem
> is resolved.
>
> On Tue, Feb 24, 2009 at 4:11 PM, Harry Mangalam 
<harry.mangalam@uci.edu> wrote:
> > Hi kpkim,
> >
> > You mean that the system needs an lvm/lvm2 layer to properly
> > interpret the underlying filesystem?
> >
> > Possible, but the USR OSS list:
> > <http://www.usr.com/support/gpl/8700-OpenSourcesList-0.63_USR.xls
> >> doesn't list lvm as part of their implementation.  Would mdadm
> > have been able to detect this?
> >
> > Harry
> >
> > On Monday 23 February 2009, hgichon wrote:
> >> I read USRobotics 8700 feature.
> >>
> >> # Supports linear storage use (all drives as one logical drive)
> >> or use multiple drives as primary and back-up storage
> >> # Dynamic logical drive sizing - Add an additional drive, when
> >> needed, and it will be integrated into the logical drive with no
> >> effect on data
> >>
> >> maybe... there is no lvm layer?
> >> try vgscan / vgchange -ay
> >>
> >> best regards.
> >
> > --
> > Harry Mangalam - Research Computing, NACS, E2148, Engineering
> > Gateway, UC Irvine 92697  949 824-0084(o), 949 285-4487(c)
> > ---
> > Good judgment comes from experience;
> > Experience comes from bad judgment. [F. Brooks.]
> > --
> > To unsubscribe from this list: send the line "unsubscribe
> > linux-raid" in the body of a message to majordomo@vger.kernel.org
> > More majordomo info at
> >  http://vger.kernel.org/majordomo-info.html



-- 
Harry Mangalam - Research Computing, NACS, E2148, Engineering Gateway, 
UC Irvine 92697  949 824-0084(o), 949 285-4487(c)
---
Good judgment comes from experience; 
Experience comes from bad judgment. [F. Brooks.]
--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

      reply	other threads:[~2009-03-14 18:15 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-02-23 18:13 rescue an alien md raid5 Harry Mangalam
2009-02-23 18:58 ` Joe Landman
2009-02-23 19:59   ` Harry Mangalam
2009-02-23 19:14 ` NeilBrown
2009-02-23 20:04   ` Harry Mangalam
2009-03-02 11:22   ` Nagilum
2009-03-02 16:57     ` Harry Mangalam
2009-02-24  0:56 ` hgichon
2009-02-24 21:11   ` Harry Mangalam
2009-03-14 14:12     ` Ryan Wagoner
2009-03-14 18:15       ` Harry Mangalam [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=200903141115.59105.harry.mangalam@uci.edu \
    --to=harry.mangalam@uci.edu \
    --cc=kpkim@gluesys.com \
    --cc=linux-raid@vger.kernel.org \
    --cc=rswagoner@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).