From: Dan Williams <dan.j.williams@intel.com>
To: linux-raid@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: neilb@suse.de, maciej.sosnowski@intel.com
Subject: [PATCH 13/13] dmatest: add pq support
Date: Wed, 18 Mar 2009 12:21:22 -0700 [thread overview]
Message-ID: <20090318192122.20375.85892.stgit@dwillia2-linux.ch.intel.com> (raw)
In-Reply-To: <20090318191248.20375.40560.stgit@dwillia2-linux.ch.intel.com>
Test raid6 p+q operations with a simple "always multiply by 1" q
calculation to fit into dmatest's current destination verification
scheme.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
---
drivers/dma/dmatest.c | 26 ++++++++++++++++++++++++++
1 files changed, 26 insertions(+), 0 deletions(-)
diff --git a/drivers/dma/dmatest.c b/drivers/dma/dmatest.c
index a27c0fb..a5ee541 100644
--- a/drivers/dma/dmatest.c
+++ b/drivers/dma/dmatest.c
@@ -43,6 +43,11 @@ module_param(xor_sources, uint, S_IRUGO);
MODULE_PARM_DESC(xor_sources,
"Number of xor source buffers (default: 3)");
+static unsigned int pq_sources = 3;
+module_param(pq_sources, uint, S_IRUGO);
+MODULE_PARM_DESC(pq_sources,
+ "Number of p+q source buffers (default: 3)");
+
/*
* Initialization patterns. All bytes in the source buffer has bit 7
* set, all bytes in the destination buffer has bit 7 cleared.
@@ -227,6 +232,7 @@ static int dmatest_func(void *data)
dma_cookie_t cookie;
enum dma_status status;
enum dma_ctrl_flags flags;
+ u8 pq_coefs[pq_sources];
int ret;
int src_cnt;
int dst_cnt;
@@ -243,6 +249,11 @@ static int dmatest_func(void *data)
else if (thread->type == DMA_XOR) {
src_cnt = xor_sources | 1; /* force odd to ensure dst = src */
dst_cnt = 1;
+ } else if (thread->type == DMA_PQ) {
+ src_cnt = pq_sources | 1; /* force odd to ensure dst = src */
+ dst_cnt = 2;
+ for (i = 0; i < pq_sources; i++)
+ pq_coefs[i] = 1;
} else
goto err_srcs;
@@ -310,6 +321,15 @@ static int dmatest_func(void *data)
dma_dsts[0] + dst_off,
dma_srcs, xor_sources,
len, flags);
+ else if (thread->type == DMA_PQ) {
+ dma_addr_t dma_pq[dst_cnt];
+
+ for (i = 0; i < dst_cnt; i++)
+ dma_pq[i] = dma_dsts[i] + dst_off;
+ tx = dev->device_prep_dma_pq(chan, dma_pq, dma_srcs,
+ pq_sources, pq_coefs,
+ len, flags);
+ }
if (!tx) {
for (i = 0; i < src_cnt; i++)
@@ -446,6 +466,8 @@ static int dmatest_add_threads(struct dmatest_chan *dtc, enum dma_transaction_ty
op = "copy";
else if (type == DMA_XOR)
op = "xor";
+ else if (type == DMA_PQ)
+ op = "pq";
else
return -EINVAL;
@@ -501,6 +523,10 @@ static int dmatest_add_channel(struct dma_chan *chan)
cnt = dmatest_add_threads(dtc, DMA_XOR);
thread_count += cnt > 0 ?: 0;
}
+ if (dma_has_cap(DMA_PQ, dma_dev->cap_mask)) {
+ cnt = dmatest_add_threads(dtc, DMA_PQ);
+ thread_count += cnt > 0 ?: 0;
+ }
pr_info("dmatest: Started %u threads using %s\n",
thread_count, dma_chan_name(chan));
next prev parent reply other threads:[~2009-03-18 19:21 UTC|newest]
Thread overview: 48+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-03-18 19:20 [PATCH 00/13] Asynchronous raid6 acceleration (part 1 of 2) Dan Williams
2009-03-18 19:20 ` [PATCH 01/13] md/raid6: move raid6 data processing to raid6_pq.ko Dan Williams
2009-03-19 20:09 ` Andre Noll
2009-03-22 17:22 ` Dan Williams
2009-03-18 19:20 ` [PATCH 02/13] async_tx: don't use src_list argument of async_xor() for dma addresses Dan Williams
2009-03-19 20:10 ` Andre Noll
2009-03-25 17:11 ` Dan Williams
2009-03-26 10:39 ` Andre Noll
2009-03-18 19:20 ` [PATCH 03/13] async_tx: provide __async_inline for HAS_DMA=n archs Dan Williams
2009-03-18 19:20 ` [PATCH 04/13] async_tx: kill needless module_{init|exit} Dan Williams
2009-03-18 19:20 ` [PATCH 05/13] async_tx: add sum check flags Dan Williams
2009-03-18 19:20 ` [PATCH 06/13] async_tx: add support for asynchronous GF multiplication Dan Williams
2009-03-19 16:06 ` H. Peter Anvin
2009-03-19 17:20 ` Dan Williams
2009-03-20 22:43 ` H. Peter Anvin
2009-03-20 23:00 ` Ilya Yanok
2009-03-20 23:25 ` H. Peter Anvin
2009-03-21 0:06 ` Ilya Yanok
2009-03-21 2:30 ` H. Peter Anvin
2009-03-21 10:19 ` Ilya Yanok
2009-03-21 19:16 ` H. Peter Anvin
2009-03-21 15:19 ` Dan Williams
2009-03-21 19:15 ` H. Peter Anvin
2009-03-21 22:14 ` Dan Williams
2009-03-21 22:26 ` Ilya Yanok
2009-03-21 22:46 ` Dan Williams
2009-03-21 20:05 ` Ilya Yanok
2009-03-21 22:00 ` Dan Williams
2009-03-21 22:43 ` Ilya Yanok
2009-03-21 22:53 ` Dan Williams
2009-03-22 21:37 ` Ilya Yanok
2009-03-19 20:09 ` Andre Noll
2009-03-30 14:30 ` Sosnowski, Maciej
2009-03-18 19:20 ` [PATCH 07/13] async_tx: add support for asynchronous RAID6 recovery operations Dan Williams
2009-03-23 10:11 ` Andre Noll
2009-03-30 14:30 ` Sosnowski, Maciej
2009-03-18 19:20 ` [PATCH 08/13] iop-adma: P+Q support for iop13xx adma engines Dan Williams
2009-03-18 19:21 ` [PATCH 09/13] iop-adma: P+Q self test Dan Williams
2009-03-20 0:14 ` Neil Brown
2009-03-20 0:19 ` Dan Williams
2009-03-30 14:30 ` Sosnowski, Maciej
2009-03-18 19:21 ` [PATCH 10/13] dmaengine: allow dma support for async_tx to be toggled Dan Williams
2009-03-18 19:21 ` [PATCH 11/13] dmatest: add xor test Dan Williams
2009-03-18 19:21 ` [PATCH 12/13] dmatest: add dma interrupts and callbacks Dan Williams
2009-03-18 19:21 ` Dan Williams [this message]
2009-03-18 23:43 ` [PATCH 00/13] Asynchronous raid6 acceleration (part 1 of 2) Andi Kleen
2009-03-19 17:08 ` Dan Williams
2009-03-20 0:30 ` Neil Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090318192122.20375.85892.stgit@dwillia2-linux.ch.intel.com \
--to=dan.j.williams@intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-raid@vger.kernel.org \
--cc=maciej.sosnowski@intel.com \
--cc=neilb@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).