Re: Help

[Info@quantum-sci.net]

Not able to boot to my RAID devices.  md0 is / and ext3 RAID1, but md1 and md2 are swap and JFS respectively, RAID10 created like this:
mdadm --create /dev/md1 --level=raid10 --layout=o2 --metadata=1.2 --chunk=256 --raid-disks=2 missing /dev/sdb2

It gives the initial kernel boot message but then says 
invalid raid superblock magic on sdb2
invalid raid superblock magic on sdb3

... and halts progress.  I have to hard-reset to continue.  Why isn't the error more specific?

I've tried setting the metadata to 1.1, and tried adjusting mdadm.conf from /dev/md/1 to /dev/md1, but neither helped.  The parts are set to raid autodetect and the kernel parameter is set to md_autodetect.  What could be wrong?
 


On Friday 21 August 2009 12:20:28 Info@quantum-sci.net wrote:
> 
> My God, the command is not working.  I need to remove sdb1 from md0 so I can change it from a RAID10 to RAID1, and it simply ignores my command:
> # mdadm /dev/md0 --fail /dev/sdb1 --remove /dev/sdb1
> # cat /proc/mdstat
> Personalities : [linear] [raid0] [raid1] [raid10] [raid6] [raid5] [raid4] [multipath]
> md2 : active raid10 sdb3[1]
>       1868560128 blocks super 1.2 64K chunks 2 offset-copies [2/1] [_U]
>       bitmap: 94/446 pages [376KB], 2048KB chunk
> 
> md1 : active raid10 sdb2[1]
>       6297344 blocks super 1.2 64K chunks 2 offset-copies [2/1] [_U]
>       bitmap: 0/25 pages [0KB], 128KB chunk
> 
> md0 : active raid10 sdb1[1]
>       78654080 blocks super 1.2 64K chunks 2 offset-copies [2/1] [_U]
>       bitmap: 76/151 pages [304KB], 256KB chunk
> 
> unused devices: <none>
> #
> 
> 
> My system is half-converted and is now unbootable.  What am I going to do?
> 
>