From: Thomas Fjellstrom <tfjellstrom@shaw.ca>
To: John Bridges <john.bridges@gmail.com>
Cc: linux-raid@vger.kernel.org
Subject: Re: recommended 4port SATA controller ?
Date: Thu, 17 Sep 2009 17:02:47 -0600 [thread overview]
Message-ID: <200909171702.47552.tfjellstrom@shaw.ca> (raw)
In-Reply-To: <fa3b69580909171437s1074d7daqc4df84580ac9a9c3@mail.gmail.com>
On Thu September 17 2009, John Bridges wrote:
> I'm a fan of the SuperMicro AOC-SAT2-MV8, great card.
> http://www.supermicro.com/products/accessories/addon/AOC-SAT2-MV8.cfm
>
> It's an 8 port PCI-X card, works in both PCI and PCI-X slots.
>
> SATA2
>
> Drivers for Linux are stable, built in.
>
Have you had any experience with the AOC-SASLP-MV8? I've got one and have been
having no end of issues with it under linux.
> You can disable the BIOS to put a LOT of cards into a single machine
> (I have four in one machine).
>
> Costs about $100
>
> http://www.newegg.com/Product/Product.aspx?Item=N82E16815121009
>
> Reliable card from a real company.
>
>
> On Thu, Sep 17, 2009 at 4:44 AM, Rainer Fuegenstein
>
> <rfu@kaneda.iguw.tuwien.ac.at> wrote:
> > hi,
> >
> > I need to move my 4 disk raid5 array from a motherboard with 4 onboard
> > SATA ports to a mainboard with just 2 ports. therefore I'm looking for a
> > reliable and inexpensive 4port PCI controller.
> >
> > the less raid features it has the better since I fear that a raid
> > controller may initially write some management informationen (signatures
> > etc.) to the disks and therefore damage the linux raid5 setup.
> >
> > And, if possible, it should have low power consumption since it is about
> > to be used in a small server powered by photovoltaic panels.
> >
> > any recommendations aprreciated.
> >
> > thanks and best regards.
> > --
> > To unsubscribe from this list: send the line "unsubscribe linux-raid" in
> > the body of a message to majordomo@vger.kernel.org
> > More majordomo info at http://vger.kernel.org/majordomo-info.html
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-raid" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
--
Thomas Fjellstrom
tfjellstrom@shaw.ca
next prev parent reply other threads:[~2009-09-17 23:02 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-09-17 11:44 recommended 4port SATA controller ? Rainer Fuegenstein
2009-09-17 11:57 ` Majed B.
2009-09-17 12:49 ` Greg Freemyer
2009-09-17 13:04 ` Jon Lewis
2009-09-17 13:17 ` Max Waterman
2009-09-17 13:28 ` Rui Santos
2009-10-13 21:19 ` Bill Davidsen
2009-09-17 13:40 ` Tapani Tarvainen
2009-09-17 14:47 ` Rainer Fuegenstein
2009-09-17 21:52 ` Matt Garman
2009-09-17 22:41 ` Kristleifur Daðason
2009-09-17 23:48 ` Rainer Fuegenstein
2009-09-21 16:29 ` Matt Garman
2009-09-22 14:05 ` Matthias Urlichs
2009-09-17 13:43 ` Christian Pernegger
2009-09-17 14:57 ` Jon Hardcastle
2009-09-17 21:37 ` John Bridges
2009-09-17 23:02 ` Thomas Fjellstrom [this message]
2009-09-17 23:35 ` Kristleifur Daðason
2009-09-17 23:59 ` Thomas Fjellstrom
2009-09-18 10:58 ` mdraid causing mvsas to lockup? (was: Re: recommended 4port SATA controller ?) Thomas Fjellstrom
2009-09-18 23:02 ` Thomas Fjellstrom
2009-09-21 16:16 ` mdraid causing mvsas to lockup? Thomas Fjellstrom
2009-09-27 3:34 ` Thomas Fjellstrom
2009-09-18 0:23 ` recommended 4port SATA controller ? John Bridges
2009-09-18 0:52 ` John Bridges
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200909171702.47552.tfjellstrom@shaw.ca \
--to=tfjellstrom@shaw.ca \
--cc=john.bridges@gmail.com \
--cc=linux-raid@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).