From mboxrd@z Thu Jan 1 00:00:00 1970 From: Thomas Fjellstrom Subject: Re: mdraid causing mvsas to lockup? Date: Mon, 21 Sep 2009 10:16:45 -0600 Message-ID: <200909211016.45679.tfjellstrom@shaw.ca> References: <4AB22135.7030405@kaneda.iguw.tuwien.ac.at> <200909180458.22305.tfjellstrom@shaw.ca> <200909181702.46109.tfjellstrom@shaw.ca> Reply-To: tfjellstrom@shaw.ca Mime-Version: 1.0 Content-Type: Text/Plain; charset=iso-8859-1 Content-Transfer-Encoding: QUOTED-PRINTABLE Return-path: In-Reply-To: <200909181702.46109.tfjellstrom@shaw.ca> Sender: linux-raid-owner@vger.kernel.org To: linux-raid@vger.kernel.org Cc: linux-kernel@vger.kernel.org, linux-scsi List-Id: linux-raid.ids On Fri September 18 2009, Thomas Fjellstrom wrote: > On Fri September 18 2009, Thomas Fjellstrom wrote: > > On Thu September 17 2009, Thomas Fjellstrom wrote: > > > On Thu September 17 2009, Kristleifur Da=F0ason wrote: > > > > On Thu, Sep 17, 2009 at 11:02 PM, Thomas Fjellstrom > > > > > > > > > > wrote: > > > > > On Thu September 17 2009, John Bridges wrote: > > > > >> I'm a fan of the SuperMicro AOC-SAT2-MV8, great card. > > > > >> http://www.supermicro.com/products/accessories/addon/AOC-SAT= 2-MV8. > > > > >>cf m > > > > >> > > > > >> It's an 8 port PCI-X card, works in both PCI and PCI-X slots= =2E > > > > >> > > > > >> SATA2 > > > > >> > > > > >> Drivers for Linux are stable, built in. > > > > > > > > > > Have you had any experience with the AOC-SASLP-MV8? I've got = one > > > > > and have been having no end of issues with it under linux. > > > > > > > > > > -- > > > > > Thomas Fjellstrom > > > > > tfjellstrom@shaw.ca > > > > > -- > > > > > > > > I have, > > > > > > > > or rather, I've tried to get an AOC-SASLP-MV8 card going. I thi= nk I > > > > can safely say that at least Linux kernel 2.6.31 is a requireme= nt. > > > > The card was basically useless with everything up to 2.6.30, th= en I > > > > tried 2.6.31-rc5 on a whim and it kicked in. Built-in driver su= pport, > > > > that is. However it wasn't stable, it dropped disks when syncin= g a > > > > large array. I've been meaning to test on 2.6.31 final, and am = pretty > > > > optimistic. > > > > > > Yeah, the driver didn't appear till .30. I have 2.6.31-git4 insta= lled > > > right now, and no matter what I do, the controller starts spewing > > > errors: > > > > > > [ 1455.698186] drivers/scsi/mvsas/mv_sas.c 1669:mvs_abort_task:rc= =3D 5 > > > [ 1455.698196] drivers/scsi/mvsas/mv_sas.c 1608:mvs_query_task:rc= =3D 5 > > > ... > > > [ 1424.708085] end_request: I/O error, dev sdh, sector 3072 > > > [ 1424.708106] sd 0:0:3:0: [sdh] Unhandled error code > > > [ 1424.708111] sd 0:0:3:0: [sdh] Result: hostbyte=3DDID_OK > > > driverbyte=3DDRIVER_TIMEOUT > > > [ 1424.708118] sd 0:0:3:0: [sdh] CDB: Read(10): 28 00 00 00 08 00= 00 04 > > > 00 00 > > > > > > And thats with perfectly good disks, and with smartd/hddtemp disa= bled > > > (they were causing one of my disks to barf). > > > > > > All I have to do is start a read from any disk, and after a few > > > minutes, the card starts erroring out, and then dies. > > > > > > It actually seems like it got more unstable from .30 to .31. > > > > > > I've been trying to get some help with it on the lkml/ide/scsi li= sts > > > for a while now, one person has tried to help, but thats about it= =2E > > > > Very strange. I've found that reading from all 4 drives currently > > connected to the controller at once, works. I have 4 dd commands, o= ne > > reading off each drive, and so far no errors, the dd commands aren'= t > > locking up, and they are going full speed (120MB/s per drive). > > > > If however I attempt to bring up the md raid0 array ontop of these = disks, > > the controller locks up, and all of the disks become inaccessible. > > > > Maybe it has something to do with it, but just as the system is boo= ting, > > I get the following, maybe related, maybe not: > > > > ata_id[5183]: HDIO_GET_IDENTITY failed for '/dev/block/8:96' > > ata_id[5188]: HDIO_GET_IDENTITY failed for '/dev/block/8:112' > > ata_id[5184]: HDIO_GET_IDENTITY failed for '/dev/block/8:80' > > > > (those map to sdg, sdh, and sdf in that order, no report for sde, t= he > > first disk in the controller) >=20 > So I've let the controller and disks sit all day after finishing a fu= ll > read test (dd if=3D/dev/sd[efgh] of=3D/dev/null bs=3D8M) with all fo= ur 1TB > drives going at the same time, and I've had no errors at all. All fo= ur dd > commands finished without error, and went at full speed. >=20 > If I attempt to activate an md raid0 array ontop of any disks on this > controller the controller starts having a fit, and all disks are > inaccessible till a hard reset (the machine won't fully reboot, or t= urn > off, as the "flushing scsi cache" or "shutting down LVM" steps will = hang > waiting on drives on the wedged controller. >=20 > I would really like to get this fixed, if there's anything more I can= do to > help narrow down the problem further, I'll do my best. >=20 Does anyone have a clue what might be wrong? Something I could check in= to? I=20 have a couple system migrations to do, and this is blocking that. (my o= ld=20 array has been making "click" noises for a year now, and I'm afraid it'= ll die=20 at any time) --=20 Thomas Fjellstrom tfjellstrom@shaw.ca -- To unsubscribe from this list: send the line "unsubscribe linux-raid" i= n the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html