linux-raid.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: NeilBrown <neilb@suse.de>
To: linux-raid@vger.kernel.org
Cc: Andre Noll <maan@systemlinux.org>, Arnd Bergmann <arnd@arndb.de>
Subject: [md PATCH 21/22] md: move compat_ioctl handling into md.c
Date: Fri, 04 Dec 2009 17:48:02 +1100	[thread overview]
Message-ID: <20091204064802.10264.47435.stgit@notabene.brown> (raw)
In-Reply-To: <20091204064559.10264.37619.stgit@notabene.brown>

From: Arnd Bergmann <arnd@arndb.de>

The RAID ioctls are only implemented in md.c, so the
handling for them should also be moved there from
fs/compat_ioctl.c.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Neil Brown <neilb@suse.de>
Cc: Andre Noll <maan@systemlinux.org>
Cc: linux-raid@vger.kernel.org
Signed-off-by: NeilBrown <neilb@suse.de>
---
 drivers/md/md.c   |   23 +++++++++++++++++++++++
 fs/compat_ioctl.c |   22 ----------------------
 2 files changed, 23 insertions(+), 22 deletions(-)

diff --git a/drivers/md/md.c b/drivers/md/md.c
index 5111587..c4a0e59 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -44,6 +44,7 @@
 #include <linux/random.h>
 #include <linux/reboot.h>
 #include <linux/file.h>
+#include <linux/compat.h>
 #include <linux/delay.h>
 #include <linux/raid/md_p.h>
 #include <linux/raid/md_u.h>
@@ -5681,6 +5682,25 @@ done:
 abort:
 	return err;
 }
+#ifdef CONFIG_COMPAT
+static int md_compat_ioctl(struct block_device *bdev, fmode_t mode,
+		    unsigned int cmd, unsigned long arg)
+{
+	switch (cmd) {
+	case HOT_REMOVE_DISK:
+	case HOT_ADD_DISK:
+	case SET_DISK_FAULTY:
+	case SET_BITMAP_FILE:
+		/* These take in integer arg, do not convert */
+		break;
+	default:
+		arg = (unsigned long)compat_ptr(arg);
+		break;
+	}
+
+	return md_ioctl(bdev, mode, cmd, arg);
+}
+#endif /* CONFIG_COMPAT */
 
 static int md_open(struct block_device *bdev, fmode_t mode)
 {
@@ -5746,6 +5766,9 @@ static const struct block_device_operations md_fops =
 	.open		= md_open,
 	.release	= md_release,
 	.ioctl		= md_ioctl,
+#ifdef CONFIG_COMPAT
+	.compat_ioctl	= md_compat_ioctl,
+#endif
 	.getgeo		= md_getgeo,
 	.media_changed	= md_media_changed,
 	.revalidate_disk= md_revalidate,
diff --git a/fs/compat_ioctl.c b/fs/compat_ioctl.c
index d84e705..ad485ba 100644
--- a/fs/compat_ioctl.c
+++ b/fs/compat_ioctl.c
@@ -1912,28 +1912,6 @@ COMPATIBLE_IOCTL(FIGETBSZ)
 /* 'X' - originally XFS but some now in the VFS */
 COMPATIBLE_IOCTL(FIFREEZE)
 COMPATIBLE_IOCTL(FITHAW)
-/* RAID */
-COMPATIBLE_IOCTL(RAID_VERSION)
-COMPATIBLE_IOCTL(GET_ARRAY_INFO)
-COMPATIBLE_IOCTL(GET_DISK_INFO)
-COMPATIBLE_IOCTL(PRINT_RAID_DEBUG)
-COMPATIBLE_IOCTL(RAID_AUTORUN)
-COMPATIBLE_IOCTL(CLEAR_ARRAY)
-COMPATIBLE_IOCTL(ADD_NEW_DISK)
-ULONG_IOCTL(HOT_REMOVE_DISK)
-COMPATIBLE_IOCTL(SET_ARRAY_INFO)
-COMPATIBLE_IOCTL(SET_DISK_INFO)
-COMPATIBLE_IOCTL(WRITE_RAID_INFO)
-COMPATIBLE_IOCTL(UNPROTECT_ARRAY)
-COMPATIBLE_IOCTL(PROTECT_ARRAY)
-ULONG_IOCTL(HOT_ADD_DISK)
-ULONG_IOCTL(SET_DISK_FAULTY)
-COMPATIBLE_IOCTL(RUN_ARRAY)
-COMPATIBLE_IOCTL(STOP_ARRAY)
-COMPATIBLE_IOCTL(STOP_ARRAY_RO)
-COMPATIBLE_IOCTL(RESTART_ARRAY_RW)
-COMPATIBLE_IOCTL(GET_BITMAP_FILE)
-ULONG_IOCTL(SET_BITMAP_FILE)
 /* Big K */
 COMPATIBLE_IOCTL(PIO_FONT)
 COMPATIBLE_IOCTL(GIO_FONT)



  parent reply	other threads:[~2009-12-04  6:48 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-12-04  6:48 [md PATCH 00/22] MD patches queued for 2.6.33 NeilBrown
2009-12-04  6:48 ` [md PATCH 01/22] md/bitmap: protect against bitmap removal while being updated NeilBrown
2009-12-04  6:48 ` [md PATCH 11/22] md: change daemon_sleep to be in 'jiffies' rather than 'seconds' NeilBrown
2009-12-04  6:48 ` [md PATCH 04/22] md: support barrier requests on all personalities NeilBrown
2009-12-08 13:54   ` Andre Noll
2009-12-10  6:25     ` Neil Brown
2009-12-11 11:46       ` Andre Noll
2009-12-04  6:48 ` [md PATCH 09/22] md: collect bitmap-specific fields into one structure NeilBrown
2009-12-04  6:48 ` [md PATCH 02/22] md: adjust resync_min usefully when resync aborts NeilBrown
2009-12-04  6:48 ` [md PATCH 03/22] md: don't reset curr_resync_completed after an interrupted resync NeilBrown
2009-12-04  6:48 ` [md PATCH 05/22] md/raid5: don't complete make_request on barrier until writes are scheduled NeilBrown
2010-01-21 21:07   ` [md PATCH 05/22] md/raid5: don't complete make_request on barrieruntil " Tirumala Reddy Marri
2010-01-28  2:44     ` Neil Brown
2009-12-04  6:48 ` [md PATCH 17/22] md/raid10: print more useful messages on device failure NeilBrown
2009-12-04  6:48 ` [md PATCH 15/22] md: Support write-intent bitmaps with externally managed metadata NeilBrown
2009-12-04  6:48 ` [md PATCH 14/22] md: support updating bitmap parameters via sysfs NeilBrown
2009-12-08 10:29   ` Andre Noll
2009-12-10  6:14     ` Neil Brown
2009-12-11 11:46       ` Andre Noll
2009-12-04  6:48 ` [md PATCH 06/22] md: add honouring of suspend_{lo,hi} to raid1 NeilBrown
2009-12-04  6:48 ` [md PATCH 12/22] md: remove needless setting of thread->timeout in raid10_quiesce NeilBrown
2009-12-04  6:48 ` [md PATCH 18/22] raid: improve MD/raid10 handling of correctable read errors NeilBrown
2009-12-04  6:48 ` [md PATCH 20/22] md: revise Kconfig help for MD_MULTIPATH NeilBrown
2009-12-04  6:48 ` [md PATCH 07/22] md/raid1: add takeover support for raid5->raid1 NeilBrown
2009-12-04  6:48 ` [md PATCH 10/22] md: move offset, daemon_sleep and chunksize out of bitmap structure NeilBrown
2009-12-04  6:48 ` [md PATCH 19/22] md: add MODULE_DESCRIPTION for all md related modules NeilBrown
2009-12-04  6:48 ` [md PATCH 13/22] md: support bitmap offset appropriate for external-metadata arrays NeilBrown
2009-12-04  6:48 ` NeilBrown [this message]
2009-12-04  6:48 ` [md PATCH 22/22] md: integrate spares into array at earliest opportunity NeilBrown
2009-12-04  6:48 ` [md PATCH 16/22] md/bitmap: update dirty flag when bitmap bits are explicitly set NeilBrown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20091204064802.10264.47435.stgit@notabene.brown \
    --to=neilb@suse.de \
    --cc=arnd@arndb.de \
    --cc=linux-raid@vger.kernel.org \
    --cc=maan@systemlinux.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).