From: Andrew Morton <akpm@linux-foundation.org>
To: "François Figarola" <francois.figarola@i-consult.fr>
Cc: linux-kernel@vger.kernel.org, Neil Brown <neilb@suse.de>,
linux-raid@vger.kernel.org, Al Viro <viro@zeniv.linux.org.uk>
Subject: Re: [BUG] kernel 2.6.32.x hangs during boot process
Date: Fri, 22 Jan 2010 16:07:40 -0800 [thread overview]
Message-ID: <20100122160740.6c16c22d.akpm@linux-foundation.org> (raw)
In-Reply-To: <d2deb3241001160158r4baed1e1t7e8f6642de018b4c@mail.gmail.com>
(cc's added)
On Sat, 16 Jan 2010 10:58:30 +0100
Fran__ois Figarola <francois.figarola@i-consult.fr> wrote:
> Dear all,
>
> First, I apologize por my poor english...
>
> Since I've tried to boot 2.6.32.x kernel, my system hangs during the
> boot process, and I think it could be related to the problem reported
> earlier by Megastorage (http://lkml.org/lkml/2010/1/10/92).
>
> The hardware is a Dell PowerEdge 2950 which runs fine with the
> 2.6.31.x kernel series (actually running with the latest 2.6.31.11),
> and the system is debian etch.
>
> Here is the trace of the bug I've got (using netconsole) with a
> 2.6.32.3 kernel :
>
> BUG: Dentry ffff880667690000{i=41a46,n=sleep} still in use (8)
> [unmount of ext3 dm-4]
> ------------[ cut here ]------------
> kernel BUG at fs/dcache.c:670!
That's
if (atomic_read(&dentry->d_count) != 0) {
printk(KERN_ERR
"BUG: Dentry %p{i=%lx,n=%s}"
" still in use (%d)"
" [unmount of %s %s]\n",
dentry,
dentry->d_inode ?
dentry->d_inode->i_ino : 0UL,
dentry->d_name.name,
atomic_read(&dentry->d_count),
dentry->d_sb->s_type->name,
dentry->d_sb->s_id);
BUG();
}
I'm a bit surprised that the system is doing a dm suspemd/resume during
the boot process.
I assume it's a DM bug, dunno.
> invalid opcode: 0000 [#1] SMP
> last sysfs file: /sys/block/dm-2/removable
> CPU 0
> Modules linked in: i5k_amb hwmon button processor thermal fan [last
> unloaded: scsi_wait_scan]
> Pid: 3311, comm: kpartx Not tainted 2.6.32.3 #2 PowerEdge 2950
> RIP: 0010:[<ffffffff810f95f0>] __[<ffffffff810f95f0>]
> shrink_dcache_for_umount_subtree+0x280/0x290
> RSP: 0018:ffff88066670dcf8 __EFLAGS: 00010296
> RAX: 000000000000005c RBX: ffff8806677696c0 RCX: 0000000000000096
> RDX: 0000000000006767 RSI: 0000000000000046 RDI: 0000000000000246
> RBP: ffff880667690000 R08: 0000000000000000 R09: ffff8806670d1628
> R10: 0000000000000000 R11: 0000000000000000 R12: ffff880667690060
> R13: 0000000000000007 R14: ffff8806654d1a88 R15: 0000000000dec0b0
> FS: __00007f176e96b770(0000) GS:ffff880028200000(0000) knlGS:0000000000000000
> CS: __0010 DS: 0000 ES: 0000 CR0: 000000008005003b
> CR2: 00007fff0a2e0080 CR3: 0000000666607000 CR4: 00000000000006f0
> DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
> Process kpartx (pid: 3311, threadinfo ffff88066670c000, task ffff8806652997d0)
> Stack:
> ffff880665b8b178 ffff880665b8af18 ffffffff81619600 0000000000000001
> <0> ffff880667408e00 ffffffff810f9629 ffff880665b8af18 ffffffff810e8049
> <0> ffff8806651333f8 ffff880667408e00 ffffffff8185fc00 ffffffff810e8159
> Call Trace:
> [<ffffffff810f9629>] ? shrink_dcache_for_umount+0x29/0x50
> [<ffffffff810e8049>] ? generic_shutdown_super+0x19/0x100
> [<ffffffff810e8159>] ? kill_block_super+0x29/0x50
> [<ffffffff810e8238>] ? deactivate_locked_super+0x58/0x80
> [<ffffffff81112842>] ? thaw_bdev+0xd2/0x110
> [<ffffffff814b0c67>] ? dm_resume+0xf7/0x160
> [<ffffffff814b5f00>] ? dev_suspend+0x0/0x220
> [<ffffffff814b60b1>] ? dev_suspend+0x1b1/0x220
> [<ffffffff814b6c7b>] ? ctl_ioctl+0x1eb/0x260
> [<ffffffff810c0b1b>] ? handle_mm_fault+0x63b/0x990
> [<ffffffff814b6cfe>] ? dm_ctl_ioctl+0xe/0x20
> [<ffffffff8104991a>] ? finish_task_switch+0x3a/0xc0
> [<ffffffff810f4e9f>] ? vfs_ioctl+0x2f/0xb0
> [<ffffffff810f53bb>] ? do_vfs_ioctl+0x3fb/0x580
> [<ffffffff815fb101>] ? thread_return+0x3e/0x64d
> [<ffffffff810f55e1>] ? sys_ioctl+0xa1/0xb0
> [<ffffffff8100bf02>] ? system_call_fastpath+0x16/0x1b
> Code: 4d 38 48 8b 45 10 48 85 c0 74 04 48 8b 50 40 48 8d 86 60 02 00
> 00 48 c7 c7 a8 66 76 81 48 89 04 24 48 89 ee 31 c0 e8 a9 11 50 00 <0f>
> 0b eb fe 0f 0b eb fe 0f 1f 84 00 00 00 00 00 53 48 89 fb 48
> RIP __[<ffffffff810f95f0>] shrink_dcache_for_umount_subtree+0x280/0x290
> RSP <ffff88066670dcf8>
> ---[ end trace 3cc1cb65fcc6a8ca ]---
>
> another trace with same behavior on a new compiled kernel with more
> debug options;
> but I can't see any difference :
>
> BUG: Dentry ffff880667556738{i=41a46,n=sleep} still in use (8)
> [unmount of ext3 dm-4]
> ------------[ cut here ]------------
> kernel BUG at fs/dcache.c:670!
> invalid opcode: 0000 [#1] SMP
> last sysfs file: /sys/block/dm-3/removable
> CPU 1
> Modules linked in: i5k_amb(+) button hwmon processor thermal fan [last
> unloaded: scsi_wait_scan]
> Pid: 3315, comm: kpartx Not tainted 2.6.32.3 #3 PowerEdge 2950
> RIP: 0010:[<ffffffff810f95f0>] __[<ffffffff810f95f0>]
> shrink_dcache_for_umount_subtree+0x280/0x290
> RSP: 0018:ffff880667089cf8 __EFLAGS: 00010296
> RAX: 000000000000005c RBX: ffff880667790a60 RCX: 0000000000000096
> RDX: 0000000000006767 RSI: 0000000000000046 RDI: 0000000000000246
> RBP: ffff880667556738 R08: 0000000000000000 R09: ffff88066604b420
> R10: 0000000000000000 R11: 0000000000000000 R12: ffff880667556798
> R13: 0000000000000007 R14: ffff880665842360 R15: 0000000000b3c0b0
> FS: __00007f7b1006c770(0000) GS:ffff880028240000(0000) knlGS:0000000000000000
> CS: __0010 DS: 0000 ES: 0000 CR0: 000000008005003b
> CR2: 00007f6e67f1c350 CR3: 0000000664ff1000 CR4: 00000000000006e0
> DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
> Process kpartx (pid: 3315, threadinfo ffff880667088000, task ffff880664f55f40)
> Stack:
> ffff880667058af0 ffff880667058890 ffffffff81619600 0000000000000001
> <0> ffff880667408e00 ffffffff810f9629 ffff880667058890 ffffffff810e8049
> <0> ffff88067f83e758 ffff880667408e00 ffffffff8185fc00 ffffffff810e8159
> Call Trace:
> [<ffffffff810f9629>] ? shrink_dcache_for_umount+0x29/0x50
> [<ffffffff810e8049>] ? generic_shutdown_super+0x19/0x100
> [<ffffffff810e8159>] ? kill_block_super+0x29/0x50
> [<ffffffff810e8238>] ? deactivate_locked_super+0x58/0x80
> [<ffffffff81112842>] ? thaw_bdev+0xd2/0x110
> [<ffffffff814b0c67>] ? dm_resume+0xf7/0x160
> [<ffffffff814b5f00>] ? dev_suspend+0x0/0x220
> [<ffffffff814b60b1>] ? dev_suspend+0x1b1/0x220
> [<ffffffff814b6c7b>] ? ctl_ioctl+0x1eb/0x260
> [<ffffffff810c0b1b>] ? handle_mm_fault+0x63b/0x990
> [<ffffffff814b6cfe>] ? dm_ctl_ioctl+0xe/0x20
> [<ffffffff8104991a>] ? finish_task_switch+0x3a/0xc0
> [<ffffffff810f4e9f>] ? vfs_ioctl+0x2f/0xb0
> [<ffffffff810f53bb>] ? do_vfs_ioctl+0x3fb/0x580
> [<ffffffff815fb101>] ? thread_return+0x3e/0x64d
> [<ffffffff810f55e1>] ? sys_ioctl+0xa1/0xb0
> [<ffffffff8100bf02>] ? system_call_fastpath+0x16/0x1b
> Code: 4d 38 48 8b 45 10 48 85 c0 74 04 48 8b 50 40 48 8d 86 60 02 00
> 00 48 c7 c7 a8 66 76 81 48 89 04 24 48 89 ee 31 c0 e8 a9 11 50 00 <0f>
> 0b eb fe 0f 0b eb fe 0f 1f 84 00 00 00 00 00 53 48 89 fb 48
> RIP __[<ffffffff810f95f0>] shrink_dcache_for_umount_subtree+0x280/0x290
> RSP <ffff880667089cf8>
> ---[ end trace a9fb3c2286e56cbd ]---
>
>
> I think the problem should be related with lvm or device mapper because
> I could start perfectly a 2.6.32.2 kernel on another PowerEdge 2950
> without any kind of lvm or dm configured...
> but I'm really not expert with kernel debug.
>
> Here is the fstab of the buggy system :
>
> # /etc/fstab: static file system information.
> #
> # <file system> <mount point> __ <type> __<options> __ __ __ <dump> __<pass>
> proc __ __ __ __ __ __/proc __ __ __ __ __ proc __ __defaults __ __ __ __0 __ __ __ 0
> /dev/dm-4 __ __ __ / __ __ __ __ __ __ __ ext3 __ __errors=remount-ro 0 __ __ __ 1
> /dev/dm-1 __ __ __ /boot __ __ __ __ __ ext3 __ __defaults __ __ __ __0 __ __ __ 2
> /dev/dm-7 __ __ __ /home __ __ __ __ __ ext3 __ __defaults __ __ __ __0 __ __ __ 2
> /dev/dm-5 __ __ __ /usr __ __ __ __ __ __ext3 __ __defaults __ __ __ __0 __ __ __ 2
> /dev/dm-6 __ __ __ /var __ __ __ __ __ __ext3 __ __defaults __ __ __ __0 __ __ __ 2
> /dev/dm-2 __ __ __ none __ __ __ __ __ __swap __ __sw __ __ __ __ __ __ __0 __ __ __ 0
> /dev/hda __ __ __ __/media/cdrom0 __ udf,iso9660 user,noauto __ __ 0 __ __ __ 0
> debugfs /sys/kernel/debug debugfs noauto 0 0
>
> I hope it can help, and try to give us more informations if necessary.
>
> Fran__ois.
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
next parent reply other threads:[~2010-01-23 0:07 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <d2deb3241001160158r4baed1e1t7e8f6642de018b4c@mail.gmail.com>
2010-01-23 0:07 ` Andrew Morton [this message]
2010-01-28 2:42 ` [BUG] kernel 2.6.32.x hangs during boot process Neil Brown
2010-01-28 6:32 ` [dm-devel] " Jun'ichi Nomura
2010-01-28 18:16 ` Thomas Backlund
2010-01-28 18:25 ` Christoph Hellwig
2010-01-29 0:56 ` [BUGFIX] [PATCH] freeze_bdev: don't deactivate successfully frozen MS_RDONLY sb Jun'ichi Nomura
2010-01-30 18:44 ` Thomas Backlund
2010-01-29 7:06 ` [dm-devel] [BUG] kernel 2.6.32.x hangs during boot process François Figarola
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100122160740.6c16c22d.akpm@linux-foundation.org \
--to=akpm@linux-foundation.org \
--cc=francois.figarola@i-consult.fr \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-raid@vger.kernel.org \
--cc=neilb@suse.de \
--cc=viro@zeniv.linux.org.uk \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).