Re: mapping ataXX.YY to a /dev/sdX

[Robin Hill <robin@robinhill.me.uk>]

[-- Attachment #1: Type: text/plain, Size: 1328 bytes --]

On Thu Jul 08, 2010 at 12:26:27PM +0200, Mikael Abrahamsson wrote:

> It seems the driver doesn't implement that, I can see it for the 
> ICH10R-controller, but not for the SiL-based one this drive is on:
> 
> [    1.289345] ahci 0000:08:00.0: setting latency timer to 64
> [    1.289436] scsi12 : ahci
> [    1.289501] scsi13 : ahci
> [    1.289542] ata13: SATA max UDMA/133 abar m2048@0xfbeff000 port 0xfbeff100 irq 40
> [    1.289546] ata14: SATA max UDMA/133 irq_stat 0x80400040 irq 40, connection status changed
> [    1.638532] ata13: SATA link down (SStatus 0 SControl 370)
> [    2.218075] ata14: SATA link up 3.0 Gbps (SStatus 123 SControl 370)
> [    2.223478] ata14.00: ATA-8: WDC WD20EADS-00R6B0, 01.00A01, max UDMA/133
> [    2.223483] ata14.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
> [    2.228491] ata14.00: configured for UDMA/133
> 
It would look like ata14 is the equivalent of scsi13 then - lsscsi or
"cat /proc/scsi" should show you the drives connected on controller 13
(or look in /sys/class/scsi_disk/13*/device/block).

Cheers,
    Robin
-- 
     ___        
    ( ' }     |       Robin Hill        <robin@robinhill.me.uk> |
   / / )      | Little Jim says ....                            |
  // !!       |      "He fallen in de water !!"                 |

[-- Attachment #2: Type: application/pgp-signature, Size: 198 bytes --]