linux-raid.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: NeilBrown <neilb@suse.de>
To: Adam Kwolek <adam.kwolek@intel.com>
Cc: linux-raid@vger.kernel.org, dan.j.williams@intel.com,
	ed.ciechanowski@intel.com, wojciech.neubauer@intel.com
Subject: Re: [PATCH 08/13] FIX/WORKAROUND: added disks are not used by reshape process /md/
Date: Wed, 12 Jan 2011 15:39:18 +1100	[thread overview]
Message-ID: <20110112153918.078ce82c@notabene.brown> (raw)
In-Reply-To: <20110110112832.10776.61385.stgit@gklab-128-013.igk.intel.com>

On Mon, 10 Jan 2011 12:28:32 +0100 Adam Kwolek <adam.kwolek@intel.com> wrote:

> md runs reshape but added disk is not touched
> /proc/mdstat reports that disk is used.
> 
> To fix this let md to set slot for reshape.
> It is possible that slot verification mechanism has to be added.
> 
> Second possibility is to investigate problem in md.
> md/raid5 treats disks as spare with disk index == -1 during raid5 reshape_start.
> Probably rqaid5 should treat as spare disks when disk index > used disks
> 
> Signed-off-by: Adam Kwolek <adam.kwolek@intel.com>
> ---
> 
>  Grow.c |    1 +
>  1 files changed, 1 insertions(+), 0 deletions(-)
> 
> diff --git a/Grow.c b/Grow.c
> index 0efa106..6b2889e 100644
> --- a/Grow.c
> +++ b/Grow.c
> @@ -1697,6 +1697,7 @@ static int reshape_array(char *container, int fd, char *devname,
>  					/* This is a spare that wants to
>  					 * be part of the array.
>  					 */
> +					d->disk.raid_disk = -1;
>  					add_disk(fd, st, info2, d);
>  				}
>  			}

We really should fix md.
I think the following might help.  I'll try testing at some stage, but if you
could let me know if it helps, that would be great.

NeilBrown

diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index d223a6c..5044bab 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -5527,8 +5527,8 @@ static int raid5_start_reshape(mddev_t *mddev)
 		return -ENOSPC;
 
 	list_for_each_entry(rdev, &mddev->disks, same_set)
-		if (rdev->raid_disk < 0 &&
-		    !test_bit(Faulty, &rdev->flags))
+		if ((rdev->raid_disk < 0 || rdev->raid_disk >= conf->raid_disks)
+		     && !test_bit(Faulty, &rdev->flags))
 			spares++;
 
 	if (spares - mddev->degraded < mddev->delta_disks - conf->max_degraded)
@@ -5588,6 +5588,11 @@ static int raid5_start_reshape(mddev_t *mddev)
 					/* Failure here is OK */;
 			} else
 				break;
+		} else if (rdev->raid_disk >= conf->previous_raid_disks
+			   && !test_bit(Faulty, &rdev->flags)) {
+			/* This is a spare that was manually added */
+			set_bit(In_sync, &rdev->flags);
+			added_devices++;
 		}
 
 	/* When a reshape changes the number of devices, ->degraded

  reply	other threads:[~2011-01-12  4:39 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-01-10 11:27 [PATCH 00/13] OLCE for external meta Raid5/single array Adam Kwolek
2011-01-10 11:27 ` [PATCH 01/13] Manage reshape process in manage_reshape vector Adam Kwolek
2011-01-12  3:51   ` NeilBrown
2011-01-10 11:27 ` [PATCH 02/13] imsm: FIX: allow for container reshape any unset size value Adam Kwolek
2011-01-12  3:52   ` NeilBrown
2011-01-12  8:32     ` Kwolek, Adam
2011-01-12 10:43       ` NeilBrown
2011-01-10 11:27 ` [PATCH 03/13] imsm: FIX: when monitor is active post update Adam Kwolek
2011-01-12  3:56   ` NeilBrown
2011-01-10 11:27 ` [PATCH 04/13] FIX: load anchor to get all information Adam Kwolek
2011-01-12  3:58   ` NeilBrown
2011-01-10 11:28 ` [PATCH 05/13] msm: FIX: when mdadm reloads anchor not need for local modyfication Adam Kwolek
2011-01-10 11:28 ` [PATCH 06/13] imsm: FIX: update disks status in container_contents() Adam Kwolek
2011-01-12  4:14   ` NeilBrown
2011-01-10 11:28 ` [PATCH 07/13] FIX: wrong flags are passed to function Adam Kwolek
2011-01-10 11:28 ` [PATCH 08/13] FIX/WORKAROUND: added disks are not used by reshape process /md/ Adam Kwolek
2011-01-12  4:39   ` NeilBrown [this message]
2011-01-10 11:28 ` [PATCH 09/13] Finalize reshape after adding disks to array Adam Kwolek
2011-01-12  4:52   ` NeilBrown
2011-01-10 11:28 ` [PATCH 10/13] FIX: Cannot unmount array after reshape Adam Kwolek
2011-01-12  4:53   ` NeilBrown
2011-01-12 15:12     ` Kwolek, Adam
2011-01-10 11:28 ` [PATCH 11/13] FIX/WORKAROUND: Arrays cannot be opened exclusively Adam Kwolek
2011-01-10 11:29 ` [PATCH 12/13] FIX: parity disks use for redundant levels only Adam Kwolek
2011-01-12  4:59   ` NeilBrown
2011-01-10 11:29 ` [PATCH 13/13] FIX: Fill sys_name for disk add Adam Kwolek
2011-01-12  5:02   ` NeilBrown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20110112153918.078ce82c@notabene.brown \
    --to=neilb@suse.de \
    --cc=adam.kwolek@intel.com \
    --cc=dan.j.williams@intel.com \
    --cc=ed.ciechanowski@intel.com \
    --cc=linux-raid@vger.kernel.org \
    --cc=wojciech.neubauer@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).