From: Wolfgang Denk <wd@denx.de>
To: Roberto Spadim <roberto@spadim.com.br>
Cc: stefan.huebner@stud.tu-ilmenau.de, linux-raid@vger.kernel.org
Subject: Re: Optimize RAID0 for max IOPS?
Date: Wed, 19 Jan 2011 08:11:38 +0100 [thread overview]
Message-ID: <20110119071138.7B2D02FC@gemini.denx.de> (raw)
In-Reply-To: <AANLkTi=v6yA_0OOfi2ymA67X0x+KsvV9VC5OgG+0DvKq@mail.gmail.com>
Dear Roberto Spadim,
In message <AANLkTi=v6yA_0OOfi2ymA67X0x+KsvV9VC5OgG+0DvKq@mail.gmail.com> you wrote:
> maybe removing hwraid and using swraid may reduce speed (depend how
> much cpu you use with hw and with sw)
> what we can optimize? less I/O per seconds making as much useful
> read/write data on array, how? good read/write algorithms for raid.
> (for each device type, ssd, hd) but... like stefan, disks are your
> bottleneck
No, they are not. Run some benchmarks yourself if you don't believe
me.
Even a single disk drive is performing better than the hw RAID under
this workload.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd@denx.de
WARNING: This Product Attracts Every Other Piece of Matter in the
Universe, Including the Products of Other Manufacturers, with a Force
Proportional to the Product of the Masses and Inversely Proportional
to the Distance Between Them.
next prev parent reply other threads:[~2011-01-19 7:11 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-01-18 21:01 Optimize RAID0 for max IOPS? Wolfgang Denk
2011-01-18 22:18 ` Roberto Spadim
2011-01-19 7:04 ` Wolfgang Denk
2011-01-18 23:15 ` Stefan /*St0fF*/ Hübner
2011-01-19 0:05 ` Roberto Spadim
2011-01-19 7:11 ` Wolfgang Denk [this message]
2011-01-19 8:18 ` Stefan /*St0fF*/ Hübner
2011-01-19 8:29 ` Jaap Crezee
2011-01-19 9:32 ` Jan Kasprzak
2011-01-19 7:10 ` Wolfgang Denk
2011-01-19 19:21 ` Wolfgang Denk
2011-01-19 19:50 ` Roberto Spadim
2011-01-19 22:36 ` Stefan /*St0fF*/ Hübner
2011-01-19 23:09 ` Roberto Spadim
2011-01-19 23:18 ` Roberto Spadim
2011-01-20 2:48 ` Keld Jørn Simonsen
2011-01-20 3:53 ` Roberto Spadim
2011-01-21 19:34 ` Wolfgang Denk
2011-01-21 20:03 ` Roberto Spadim
2011-01-21 20:04 ` Roberto Spadim
2011-01-24 14:40 ` CoolCold
2011-01-24 15:25 ` Justin Piszcz
2011-01-24 20:48 ` Wolfgang Denk
2011-01-24 21:57 ` Wolfgang Denk
2011-01-24 23:03 ` Dave Chinner
2011-01-25 7:39 ` Emmanuel Florac
2011-01-25 8:36 ` Dave Chinner
2011-01-25 12:45 ` Wolfgang Denk
2011-01-25 12:51 ` Emmanuel Florac
2011-01-24 20:43 ` Wolfgang Denk
2011-01-25 17:10 ` Christoph Hellwig
2011-01-25 18:41 ` Wolfgang Denk
2011-01-25 21:35 ` Christoph Hellwig
2011-01-26 7:16 ` Wolfgang Denk
2011-01-26 8:32 ` Stan Hoeppner
2011-01-26 8:42 ` Wolfgang Denk
2011-01-26 9:38 ` Christoph Hellwig
2011-01-26 9:41 ` CoolCold
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110119071138.7B2D02FC@gemini.denx.de \
--to=wd@denx.de \
--cc=linux-raid@vger.kernel.org \
--cc=roberto@spadim.com.br \
--cc=stefan.huebner@stud.tu-ilmenau.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).