From: "Keld Jørn Simonsen" <keld@keldix.com>
To: Roberto Spadim <roberto@spadim.com.br>
Cc: "Jon Nelson" <jnelson-linux-raid@jamponi.net>,
"Mathias Burén" <mathias.buren@gmail.com>,
"Keld Jørn Simonsen" <keld@keldix.com>,
"Stan Hoeppner" <stan@hardwarefreak.com>,
Denis <denismpa@gmail.com>,
Linux-RAID <linux-raid@vger.kernel.org>
Subject: Re: What's the typical RAID10 setup?
Date: Mon, 31 Jan 2011 23:52:35 +0100 [thread overview]
Message-ID: <20110131225235.GA11775@www2.open-std.org> (raw)
In-Reply-To: <AANLkTi=kUGc8bjisn69BEEkZr6kcHUyfKnVZzNtgaJf3@mail.gmail.com>
On Mon, Jan 31, 2011 at 07:47:05PM -0200, Roberto Spadim wrote:
> =] hehehe there is no standard for linux, just the linux standard that
> was implemented :P
There is a Linux standard, LSB Linux Standard Base ISO/IEC 23360.
And then there is the POSIX standard that the Linux kernel and
many utilities in GNU/linux follow. POSIX is ISO/IEC 9945.
> linux raid10 work and is the same idea of the 'raid10' academic standard
raid1+0 and Linux MD raid10 are similar, but significantly different
in a number of ways. Linux MD raid10 can run on only 2 drives.
Linux raid10,f2 has almost RAID0 striping performance in sequential read.
You can have an odd number of drives in raid10.
And you can have as many copies as you like in raid10,
> i don?t know any raid standard, just hardware based standard
There is an organisation that standardizes RAID levels.
Unfortunately I cannot find a link right now.
The raid10 offset layout is an implementation of one of their specs.
> you can?t get a smart array(hp) disk and put on a perc(dell) or linux
> mdadm and wait it will work without tweaking...
Yes. And?
best regards
keld
> 2011/1/31 Jon Nelson <jnelson-linux-raid@jamponi.net>:
> > Before this goes any further, why not just reference the excellent
> > Wikipedia article (actually, excellent applies to both Wikipedia *and*
> > the article):
> >
> > http://en.wikipedia.org/wiki/Non-standard_RAID_levels#Linux_MD_RAID_10
> >
> > The only problem I have with the wikipedia article is the assertion
> > that Linux MD RAID 10 is non-standard. It's as standard as anything
> > else is in this world.
> >
> >
> > --
> > Jon
> > --
> > To unsubscribe from this list: send the line "unsubscribe linux-raid" in
> > the body of a message to majordomo@vger.kernel.org
> > More majordomo info at http://vger.kernel.org/majordomo-info.html
> >
>
>
>
> --
> Roberto Spadim
> Spadim Technology / SPAEmpresarial
--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2011-01-31 22:52 UTC|newest]
Thread overview: 127+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-01-31 9:41 What's the typical RAID10 setup? Mathias Burén
2011-01-31 10:14 ` Robin Hill
2011-01-31 10:22 ` Mathias Burén
2011-01-31 10:36 ` CoolCold
2011-01-31 15:00 ` Roberto Spadim
2011-01-31 15:21 ` Robin Hill
2011-01-31 15:27 ` Roberto Spadim
2011-01-31 15:28 ` Roberto Spadim
2011-01-31 15:32 ` Roberto Spadim
2011-01-31 15:34 ` Roberto Spadim
2011-01-31 15:37 ` Roberto Spadim
2011-01-31 15:45 ` Robin Hill
2011-01-31 16:55 ` Denis
2011-01-31 17:31 ` Roberto Spadim
2011-01-31 18:35 ` Denis
2011-01-31 19:15 ` Roberto Spadim
2011-01-31 19:28 ` Keld Jørn Simonsen
2011-01-31 19:35 ` Roberto Spadim
2011-01-31 19:37 ` Roberto Spadim
2011-01-31 20:22 ` Keld Jørn Simonsen
2011-01-31 20:17 ` Stan Hoeppner
2011-01-31 20:37 ` Keld Jørn Simonsen
2011-01-31 21:20 ` Roberto Spadim
2011-01-31 21:24 ` Mathias Burén
2011-01-31 21:27 ` Jon Nelson
2011-01-31 21:47 ` Roberto Spadim
2011-01-31 21:51 ` Roberto Spadim
2011-01-31 22:50 ` NeilBrown
2011-01-31 22:53 ` Roberto Spadim
2011-01-31 23:10 ` NeilBrown
2011-01-31 23:14 ` Roberto Spadim
2011-01-31 22:52 ` Keld Jørn Simonsen [this message]
2011-01-31 23:00 ` Roberto Spadim
2011-02-01 10:01 ` David Brown
2011-02-01 13:50 ` Jon Nelson
2011-02-01 14:25 ` Roberto Spadim
2011-02-01 14:48 ` David Brown
2011-02-01 15:41 ` Roberto Spadim
2011-02-03 3:36 ` Drew
2011-02-03 8:18 ` Stan Hoeppner
[not found] ` <AANLkTikerSZfhMbkEvGBVyLB=wHDSHLWszoEz5As5Hi4@mail.gmail.com>
[not found] ` <AANLkTikLyR206x4aMy+veNkWPV67uF9r5dZKGqXJUEqN@mail.gmail.com>
2011-02-03 14:35 ` Roberto Spadim
2011-02-03 15:43 ` Keld Jørn Simonsen
2011-02-03 15:50 ` Roberto Spadim
2011-02-03 15:54 ` Roberto Spadim
2011-02-03 16:02 ` Keld Jørn Simonsen
2011-02-03 16:07 ` Roberto Spadim
2011-02-03 16:16 ` Roberto Spadim
2011-02-01 22:05 ` Stan Hoeppner
2011-02-01 23:12 ` Roberto Spadim
2011-02-02 9:25 ` Robin Hill
2011-02-02 16:00 ` Roberto Spadim
2011-02-02 16:06 ` Roberto Spadim
2011-02-02 16:07 ` Roberto Spadim
2011-02-02 16:10 ` Roberto Spadim
2011-02-02 16:13 ` Roberto Spadim
2011-02-02 19:44 ` Keld Jørn Simonsen
2011-02-02 20:28 ` Roberto Spadim
2011-02-02 21:31 ` Roberto Spadim
2011-02-02 22:13 ` Keld Jørn Simonsen
2011-02-02 22:26 ` Roberto Spadim
2011-02-03 1:57 ` Roberto Spadim
2011-02-03 3:05 ` Stan Hoeppner
2011-02-03 3:13 ` Roberto Spadim
2011-02-03 3:17 ` Roberto Spadim
2011-02-01 23:35 ` Keld Jørn Simonsen
2011-02-01 16:02 ` Keld Jørn Simonsen
2011-02-01 16:24 ` Roberto Spadim
2011-02-01 17:56 ` Keld Jørn Simonsen
2011-02-01 18:09 ` Roberto Spadim
2011-02-01 20:16 ` Keld Jørn Simonsen
2011-02-01 20:32 ` Keld Jørn Simonsen
2011-02-01 20:58 ` Roberto Spadim
2011-02-01 21:04 ` Roberto Spadim
2011-02-01 21:18 ` David Brown
2011-02-01 0:58 ` Stan Hoeppner
2011-02-01 12:50 ` Roman Mamedov
2011-02-03 11:04 ` Keld Jørn Simonsen
2011-02-03 14:17 ` Roberto Spadim
2011-02-03 15:54 ` Keld Jørn Simonsen
2011-02-03 18:39 ` Keld Jørn Simonsen
2011-02-03 18:41 ` Roberto Spadim
2011-02-03 23:43 ` Stan Hoeppner
2011-02-04 3:49 ` hansbkk
2011-02-04 7:06 ` Keld Jørn Simonsen
2011-02-04 8:27 ` Stan Hoeppner
2011-02-04 9:06 ` Keld Jørn Simonsen
2011-02-04 10:04 ` Stan Hoeppner
2011-02-04 11:15 ` hansbkk
2011-02-04 13:33 ` Keld Jørn Simonsen
2011-02-04 20:35 ` Keld Jørn Simonsen
2011-02-04 20:42 ` Keld Jørn Simonsen
2011-02-04 21:15 ` Stan Hoeppner
2011-02-04 22:05 ` Keld Jørn Simonsen
2011-02-04 23:03 ` Stan Hoeppner
2011-02-06 3:59 ` Drew
2011-02-06 4:27 ` Stan Hoeppner
2011-02-04 11:34 ` David Brown
2011-02-04 13:53 ` Keld Jørn Simonsen
2011-02-04 14:17 ` David Brown
2011-02-04 14:21 ` hansbkk
2011-02-06 4:02 ` Drew
2011-02-06 7:58 ` Keld Jørn Simonsen
2011-02-06 12:03 ` Roman Mamedov
2011-02-06 14:30 ` Roberto Spadim
2011-02-01 8:46 ` hansbkk
2011-01-31 19:37 ` Phillip Susi
2011-01-31 19:41 ` Roberto Spadim
2011-01-31 19:46 ` Phillip Susi
2011-01-31 19:53 ` Roberto Spadim
2011-01-31 22:10 ` Phillip Susi
2011-01-31 22:14 ` Denis
2011-01-31 22:33 ` Roberto Spadim
2011-01-31 22:36 ` Roberto Spadim
2011-01-31 20:23 ` Stan Hoeppner
2011-01-31 21:59 ` Phillip Susi
2011-01-31 22:08 ` Jon Nelson
2011-01-31 22:38 ` Phillip Susi
2011-02-01 10:05 ` David Brown
2011-02-01 9:20 ` Robin Hill
2011-02-04 16:03 ` Phillip Susi
2011-02-04 16:22 ` Robin Hill
2011-02-04 20:35 ` [OT] " Phil Turmel
2011-02-04 20:35 ` Phillip Susi
2011-02-04 21:05 ` Stan Hoeppner
2011-02-04 21:13 ` Roberto Spadim
2011-01-31 15:30 ` Robin Hill
2011-01-31 20:07 ` Stan Hoeppner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110131225235.GA11775@www2.open-std.org \
--to=keld@keldix.com \
--cc=denismpa@gmail.com \
--cc=jnelson-linux-raid@jamponi.net \
--cc=linux-raid@vger.kernel.org \
--cc=mathias.buren@gmail.com \
--cc=roberto@spadim.com.br \
--cc=stan@hardwarefreak.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).