From: Robin Hill <robin@robinhill.me.uk>
To: Linux-RAID <linux-raid@vger.kernel.org>
Subject: Re: What's the typical RAID10 setup?
Date: Tue, 1 Feb 2011 09:20:07 +0000 [thread overview]
Message-ID: <20110201092007.GA7860@cthulhu.home.robinhill.me.uk> (raw)
In-Reply-To: <4D4730C0.8080900@cfl.rr.com>
[-- Attachment #1: Type: text/plain, Size: 1399 bytes --]
On Mon Jan 31, 2011 at 04:59:28PM -0500, Phillip Susi wrote:
> On 1/31/2011 3:23 PM, Stan Hoeppner wrote:
> > This is absolutely not correct. In a 10 disk RAID 10 array, exactly 5 disks can
> > fail, as long as no two are in the same mirror pair, and the array will continue
> > to function, with little or no performance degradation.
>
> That is a raid 0+1, not raid10.
>
No, it's RAID 10 or RAID 1+0. RAID 0+1 would be 2 mirrored pairs of
5-disk RAID 0 arrays, in which case you could only lose 5 disks if
they're all from the same RAID 0 array. With RAID 10 or RAID 1+0 (in
the case of a 10-disk n2 setup, the physical layout should be exactly
the same) then the restriction is, as stated, that no two are "mirrored"
(whether that's a separate RAID 1 mirror or just that the two are
defined by the RAID 10 layout to contain the same data is irrelevant).
> > Where are you getting your information? Pretty much everything you stated is
> > wrong...
>
> The mdadm man page.
>
The md man page would be better for information on the physical layouts,
but I don't see anything on there to support what you're saying here.
Cheers,
Robin
--
___
( ' } | Robin Hill <robin@robinhill.me.uk> |
/ / ) | Little Jim says .... |
// !! | "He fallen in de water !!" |
[-- Attachment #2: Type: application/pgp-signature, Size: 198 bytes --]
next prev parent reply other threads:[~2011-02-01 9:20 UTC|newest]
Thread overview: 127+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-01-31 9:41 What's the typical RAID10 setup? Mathias Burén
2011-01-31 10:14 ` Robin Hill
2011-01-31 10:22 ` Mathias Burén
2011-01-31 10:36 ` CoolCold
2011-01-31 15:00 ` Roberto Spadim
2011-01-31 15:21 ` Robin Hill
2011-01-31 15:27 ` Roberto Spadim
2011-01-31 15:28 ` Roberto Spadim
2011-01-31 15:32 ` Roberto Spadim
2011-01-31 15:34 ` Roberto Spadim
2011-01-31 15:37 ` Roberto Spadim
2011-01-31 15:45 ` Robin Hill
2011-01-31 16:55 ` Denis
2011-01-31 17:31 ` Roberto Spadim
2011-01-31 18:35 ` Denis
2011-01-31 19:15 ` Roberto Spadim
2011-01-31 19:28 ` Keld Jørn Simonsen
2011-01-31 19:35 ` Roberto Spadim
2011-01-31 19:37 ` Roberto Spadim
2011-01-31 20:22 ` Keld Jørn Simonsen
2011-01-31 20:17 ` Stan Hoeppner
2011-01-31 20:37 ` Keld Jørn Simonsen
2011-01-31 21:20 ` Roberto Spadim
2011-01-31 21:24 ` Mathias Burén
2011-01-31 21:27 ` Jon Nelson
2011-01-31 21:47 ` Roberto Spadim
2011-01-31 21:51 ` Roberto Spadim
2011-01-31 22:50 ` NeilBrown
2011-01-31 22:53 ` Roberto Spadim
2011-01-31 23:10 ` NeilBrown
2011-01-31 23:14 ` Roberto Spadim
2011-01-31 22:52 ` Keld Jørn Simonsen
2011-01-31 23:00 ` Roberto Spadim
2011-02-01 10:01 ` David Brown
2011-02-01 13:50 ` Jon Nelson
2011-02-01 14:25 ` Roberto Spadim
2011-02-01 14:48 ` David Brown
2011-02-01 15:41 ` Roberto Spadim
2011-02-03 3:36 ` Drew
2011-02-03 8:18 ` Stan Hoeppner
[not found] ` <AANLkTikerSZfhMbkEvGBVyLB=wHDSHLWszoEz5As5Hi4@mail.gmail.com>
[not found] ` <AANLkTikLyR206x4aMy+veNkWPV67uF9r5dZKGqXJUEqN@mail.gmail.com>
2011-02-03 14:35 ` Roberto Spadim
2011-02-03 15:43 ` Keld Jørn Simonsen
2011-02-03 15:50 ` Roberto Spadim
2011-02-03 15:54 ` Roberto Spadim
2011-02-03 16:02 ` Keld Jørn Simonsen
2011-02-03 16:07 ` Roberto Spadim
2011-02-03 16:16 ` Roberto Spadim
2011-02-01 22:05 ` Stan Hoeppner
2011-02-01 23:12 ` Roberto Spadim
2011-02-02 9:25 ` Robin Hill
2011-02-02 16:00 ` Roberto Spadim
2011-02-02 16:06 ` Roberto Spadim
2011-02-02 16:07 ` Roberto Spadim
2011-02-02 16:10 ` Roberto Spadim
2011-02-02 16:13 ` Roberto Spadim
2011-02-02 19:44 ` Keld Jørn Simonsen
2011-02-02 20:28 ` Roberto Spadim
2011-02-02 21:31 ` Roberto Spadim
2011-02-02 22:13 ` Keld Jørn Simonsen
2011-02-02 22:26 ` Roberto Spadim
2011-02-03 1:57 ` Roberto Spadim
2011-02-03 3:05 ` Stan Hoeppner
2011-02-03 3:13 ` Roberto Spadim
2011-02-03 3:17 ` Roberto Spadim
2011-02-01 23:35 ` Keld Jørn Simonsen
2011-02-01 16:02 ` Keld Jørn Simonsen
2011-02-01 16:24 ` Roberto Spadim
2011-02-01 17:56 ` Keld Jørn Simonsen
2011-02-01 18:09 ` Roberto Spadim
2011-02-01 20:16 ` Keld Jørn Simonsen
2011-02-01 20:32 ` Keld Jørn Simonsen
2011-02-01 20:58 ` Roberto Spadim
2011-02-01 21:04 ` Roberto Spadim
2011-02-01 21:18 ` David Brown
2011-02-01 0:58 ` Stan Hoeppner
2011-02-01 12:50 ` Roman Mamedov
2011-02-03 11:04 ` Keld Jørn Simonsen
2011-02-03 14:17 ` Roberto Spadim
2011-02-03 15:54 ` Keld Jørn Simonsen
2011-02-03 18:39 ` Keld Jørn Simonsen
2011-02-03 18:41 ` Roberto Spadim
2011-02-03 23:43 ` Stan Hoeppner
2011-02-04 3:49 ` hansbkk
2011-02-04 7:06 ` Keld Jørn Simonsen
2011-02-04 8:27 ` Stan Hoeppner
2011-02-04 9:06 ` Keld Jørn Simonsen
2011-02-04 10:04 ` Stan Hoeppner
2011-02-04 11:15 ` hansbkk
2011-02-04 13:33 ` Keld Jørn Simonsen
2011-02-04 20:35 ` Keld Jørn Simonsen
2011-02-04 20:42 ` Keld Jørn Simonsen
2011-02-04 21:15 ` Stan Hoeppner
2011-02-04 22:05 ` Keld Jørn Simonsen
2011-02-04 23:03 ` Stan Hoeppner
2011-02-06 3:59 ` Drew
2011-02-06 4:27 ` Stan Hoeppner
2011-02-04 11:34 ` David Brown
2011-02-04 13:53 ` Keld Jørn Simonsen
2011-02-04 14:17 ` David Brown
2011-02-04 14:21 ` hansbkk
2011-02-06 4:02 ` Drew
2011-02-06 7:58 ` Keld Jørn Simonsen
2011-02-06 12:03 ` Roman Mamedov
2011-02-06 14:30 ` Roberto Spadim
2011-02-01 8:46 ` hansbkk
2011-01-31 19:37 ` Phillip Susi
2011-01-31 19:41 ` Roberto Spadim
2011-01-31 19:46 ` Phillip Susi
2011-01-31 19:53 ` Roberto Spadim
2011-01-31 22:10 ` Phillip Susi
2011-01-31 22:14 ` Denis
2011-01-31 22:33 ` Roberto Spadim
2011-01-31 22:36 ` Roberto Spadim
2011-01-31 20:23 ` Stan Hoeppner
2011-01-31 21:59 ` Phillip Susi
2011-01-31 22:08 ` Jon Nelson
2011-01-31 22:38 ` Phillip Susi
2011-02-01 10:05 ` David Brown
2011-02-01 9:20 ` Robin Hill [this message]
2011-02-04 16:03 ` Phillip Susi
2011-02-04 16:22 ` Robin Hill
2011-02-04 20:35 ` [OT] " Phil Turmel
2011-02-04 20:35 ` Phillip Susi
2011-02-04 21:05 ` Stan Hoeppner
2011-02-04 21:13 ` Roberto Spadim
2011-01-31 15:30 ` Robin Hill
2011-01-31 20:07 ` Stan Hoeppner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110201092007.GA7860@cthulhu.home.robinhill.me.uk \
--to=robin@robinhill.me.uk \
--cc=linux-raid@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).