linux-raid.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: NeilBrown <neilb@suse.de>
To: Piergiorgio Sartor <piergiorgio.sartor@nexgo.de>
Cc: linux-raid@vger.kernel.org
Subject: Re: [PATCH] RAID-6 check standalone suspend array V2.0
Date: Mon, 16 May 2011 20:08:57 +1000	[thread overview]
Message-ID: <20110516200857.3a009a64@notabene.brown> (raw)
In-Reply-To: <20110515211515.GA30260@lazy.lzy>

On Sun, 15 May 2011 23:15:15 +0200 Piergiorgio Sartor
<piergiorgio.sartor@nexgo.de> wrote:

> Hi Neil,
> 
> reminder for the suspend patch.
> 
> Thank you so much for the code review.
> 
> I modified it in order to fix, hopefully, all the flaws.
> 
> New patch attached below.
> 
> Please note that "sigblock()" cannot be used, since it is
> declared, at least on my system, as "deprecated".
> Furthermore, I noticed that "Grow.c" is not checking the
> return value of "sysfs_set_num()" while suspending the
> array, maybe you'll need to look at this.
> 
> Finally, please check the new patch too, while I can
> confirm the software is doing what is supposed to do,
> I still need support in order to confirm the suspend
> and resume code.
> 
> Thanks again for your help, again let me know what
> is the next expected step.

That all looks fine thank.  I've applied it and pushed it out.

I'm not sure what you mean exactly by the 'next expected step'... 

Thanks,
NeilBrown


> 
> bye,
> 
> --- cut here ---
> 
> diff -uNr a/raid6check.c b/raid6check.c
> --- a/raid6check.c	2011-05-07 20:35:18.693370007 +0200
> +++ b/raid6check.c	2011-05-09 20:32:14.551695036 +0200
> @@ -24,6 +24,8 @@
>  
>  #include "mdadm.h"
>  #include <stdint.h>
> +#include <signal.h>
> +#include <sys/mman.h>
>  
>  int geo_map(int block, unsigned long long stripe, int raid_disks,
>  	    int level, int layout);
> @@ -99,7 +101,7 @@
>  	return curr_broken_disk;
>  }
>  
> -int check_stripes(int *source, unsigned long long *offsets,
> +int check_stripes(struct mdinfo *info, int *source, unsigned long long *offsets,
>  		  int raid_disks, int chunk_size, int level, int layout,
>  		  unsigned long long start, unsigned long long length, char *name[])
>  {
> @@ -115,6 +117,8 @@
>  	int diskP, diskQ;
>  	int data_disks = raid_disks - 2;
>  	int err = 0;
> +	sighandler_t sig[3];
> +	int rv;
>  
>  	extern int tables_ready;
>  
> @@ -139,10 +143,35 @@
>  
>  		printf("pos --> %llu\n", start);
>  
> +		if(mlockall(MCL_CURRENT | MCL_FUTURE) != 0) {
> +			err = 2;
> +			goto exitCheck;
> +		}
> +		sig[0] = signal(SIGTERM, SIG_IGN);
> +		sig[1] = signal(SIGINT, SIG_IGN);
> +		sig[2] = signal(SIGQUIT, SIG_IGN);
> +		rv = sysfs_set_num(info, NULL, "suspend_lo", start * chunk_size * data_disks);
> +		rv |= sysfs_set_num(info, NULL, "suspend_hi", (start + 1) * chunk_size * data_disks);
>  		for (i = 0 ; i < raid_disks ; i++) {
>  			lseek64(source[i], offsets[i] + start * chunk_size, 0);
>  			read(source[i], stripes[i], chunk_size);
>  		}
> +		rv |= sysfs_set_num(info, NULL, "suspend_lo", 0x7FFFFFFFFFFFFFFFULL);
> +		rv |= sysfs_set_num(info, NULL, "suspend_hi", 0);
> +		rv |= sysfs_set_num(info, NULL, "suspend_lo", 0);
> +		signal(SIGQUIT, sig[2]);
> +		signal(SIGINT, sig[1]);
> +		signal(SIGTERM, sig[0]);
> +		if(munlockall() != 0) {
> +			err = 3;
> +			goto exitCheck;
> +		}
> +
> +		if(rv != 0) {
> +			err = rv * 256;
> +			goto exitCheck;
> +		}
> +
>  		for (i = 0 ; i < data_disks ; i++) {
>  			int disk = geo_map(i, start, raid_disks, level, layout);
>  			blocks[i] = stripes[disk];
> @@ -214,7 +243,7 @@
>  	unsigned long long start, length;
>  	int i;
>  	int mdfd;
> -	struct mdinfo *info, *comp;
> +	struct mdinfo *info = NULL, *comp = NULL;
>  	char *err = NULL;
>  	int exit_err = 0;
>  	int close_flag = 0;
> @@ -250,6 +279,12 @@
>  			  GET_OFFSET|
>  			  GET_SIZE);
>  
> +	if(info == NULL) {
> +		fprintf(stderr, "%s: Error reading sysfs information of %s\n", prg, argv[1]);
> +		exit_err = 9;
> +		goto exitHere;
> +	}
> +
>  	if(info->array.level != level) {
>  		fprintf(stderr, "%s: %s not a RAID-6\n", prg, argv[1]);
>  		exit_err = 3;
> @@ -343,7 +378,7 @@
>  		comp = comp->next;
>  	}
>  
> -	int rv = check_stripes(fds, offsets,
> +	int rv = check_stripes(info, fds, offsets,
>  			       raid_disks, chunk_size, level, layout,
>  			       start, length, disk_name);
>  	if (rv != 0) {
> 
> --- cut here ---
> 
> bye,
> 


  reply	other threads:[~2011-05-16 10:08 UTC|newest]

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-02-21 20:45 [PATCH] RAID-6 check standalone Piergiorgio Sartor
2011-03-07 19:33 ` Piergiorgio Sartor
2011-03-21  3:02 ` NeilBrown
2011-03-21 10:40   ` Piergiorgio Sartor
2011-03-21 11:04     ` NeilBrown
2011-03-21 11:54       ` Piergiorgio Sartor
2011-03-21 22:59         ` NeilBrown
2011-03-31 18:53           ` [PATCH] RAID-6 check standalone md device Piergiorgio Sartor
     [not found]             ` <4D96597C.1020103@tuxes.nl>
     [not found]               ` <20110402071310.GA2640@lazy.lzy>
2011-04-02 10:33                 ` Bas van Schaik
2011-04-02 11:03                   ` Piergiorgio Sartor
2011-04-04 23:01             ` NeilBrown
2011-04-05 19:56               ` Piergiorgio Sartor
2011-04-04 17:52           ` [PATCH] RAID-6 check standalone code cleanup Piergiorgio Sartor
2011-04-04 23:12             ` NeilBrown
2011-04-06 18:02               ` Piergiorgio Sartor
2011-04-13 20:48                 ` [PATCH] RAID-6 check standalone fix component list parsing Piergiorgio Sartor
2011-04-14  7:29                   ` NeilBrown
2011-04-14  7:32                 ` [PATCH] RAID-6 check standalone code cleanup NeilBrown
2011-05-08 18:54               ` [PATCH] RAID-6 check standalone suspend array Piergiorgio Sartor
2011-05-09  1:45                 ` NeilBrown
2011-05-09 18:43                   ` [PATCH] RAID-6 check standalone suspend array V2.0 Piergiorgio Sartor
2011-05-15 21:15                     ` Piergiorgio Sartor
2011-05-16 10:08                       ` NeilBrown [this message]
2011-07-20 17:57                         ` Piergiorgio Sartor
2011-07-22  6:41                           ` Luca Berra
2011-07-25 18:53                             ` Piergiorgio Sartor
2011-07-26  5:25                           ` NeilBrown
2011-08-07 17:09                             ` [PATCH] RAID-6 check standalone man page Piergiorgio Sartor
2011-08-09  0:43                               ` NeilBrown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20110516200857.3a009a64@notabene.brown \
    --to=neilb@suse.de \
    --cc=linux-raid@vger.kernel.org \
    --cc=piergiorgio.sartor@nexgo.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).