From: NeilBrown <neilb@suse.de>
To: linux-raid@vger.kernel.org
Subject: [md PATCH 07/34] md/raid5: Protect some more code with ->device_lock.
Date: Thu, 21 Jul 2011 12:32:25 +1000 [thread overview]
Message-ID: <20110721023225.6728.43609.stgit@notabene.brown> (raw)
In-Reply-To: <20110721022537.6728.90204.stgit@notabene.brown>
Other places that change or follow dev->towrite and dev->written take
the device_lock as well as the sh->lock.
So it should really be held in these places too.
Also, doing so will allow sh->lock to be discarded.
with merged fixes by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.de>
---
drivers/md/raid5.c | 30 ++++++++++++++++--------------
1 files changed, 16 insertions(+), 14 deletions(-)
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index f2f2ab3..9985138 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -1021,10 +1021,12 @@ ops_run_biodrain(struct stripe_head *sh, struct dma_async_tx_descriptor *tx)
struct bio *wbi;
spin_lock(&sh->lock);
+ spin_lock_irq(&sh->raid_conf->device_lock);
chosen = dev->towrite;
dev->towrite = NULL;
BUG_ON(dev->written);
wbi = dev->written = chosen;
+ spin_unlock_irq(&sh->raid_conf->device_lock);
spin_unlock(&sh->lock);
while (wbi && wbi->bi_sector <
@@ -2141,7 +2143,7 @@ static int add_stripe_bio(struct stripe_head *sh, struct bio *bi, int dd_idx, in
raid5_conf_t *conf = sh->raid_conf;
int firstwrite=0;
- pr_debug("adding bh b#%llu to stripe s#%llu\n",
+ pr_debug("adding bi b#%llu to stripe s#%llu\n",
(unsigned long long)bi->bi_sector,
(unsigned long long)sh->sector);
@@ -2167,19 +2169,6 @@ static int add_stripe_bio(struct stripe_head *sh, struct bio *bi, int dd_idx, in
bi->bi_next = *bip;
*bip = bi;
bi->bi_phys_segments++;
- spin_unlock_irq(&conf->device_lock);
- spin_unlock(&sh->lock);
-
- pr_debug("added bi b#%llu to stripe s#%llu, disk %d.\n",
- (unsigned long long)bi->bi_sector,
- (unsigned long long)sh->sector, dd_idx);
-
- if (conf->mddev->bitmap && firstwrite) {
- bitmap_startwrite(conf->mddev->bitmap, sh->sector,
- STRIPE_SECTORS, 0);
- sh->bm_seq = conf->seq_flush+1;
- set_bit(STRIPE_BIT_DELAY, &sh->state);
- }
if (forwrite) {
/* check if page is covered */
@@ -2194,6 +2183,19 @@ static int add_stripe_bio(struct stripe_head *sh, struct bio *bi, int dd_idx, in
if (sector >= sh->dev[dd_idx].sector + STRIPE_SECTORS)
set_bit(R5_OVERWRITE, &sh->dev[dd_idx].flags);
}
+ spin_unlock_irq(&conf->device_lock);
+ spin_unlock(&sh->lock);
+
+ pr_debug("added bi b#%llu to stripe s#%llu, disk %d.\n",
+ (unsigned long long)(*bip)->bi_sector,
+ (unsigned long long)sh->sector, dd_idx);
+
+ if (conf->mddev->bitmap && firstwrite) {
+ bitmap_startwrite(conf->mddev->bitmap, sh->sector,
+ STRIPE_SECTORS, 0);
+ sh->bm_seq = conf->seq_flush+1;
+ set_bit(STRIPE_BIT_DELAY, &sh->state);
+ }
return 1;
overlap:
next prev parent reply other threads:[~2011-07-21 2:32 UTC|newest]
Thread overview: 71+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-07-21 2:32 [md PATCH 00/34] md patches for 3.1 - part 1 NeilBrown
2011-07-21 2:32 ` [md PATCH 03/34] md/raid10: share pages between read and write bio's during recovery NeilBrown
2011-07-21 2:32 ` [md PATCH 02/34] md/raid10: factor out common bio handling code NeilBrown
2011-07-21 2:32 ` [md PATCH 01/34] md/raid10: get rid of duplicated conditional expression NeilBrown
2011-07-21 2:32 ` [md PATCH 05/34] md/raid5: get rid of duplicated call to bio_data_dir() NeilBrown
2011-07-21 2:32 ` [md PATCH 09/34] md/raid5: move common code into handle_stripe NeilBrown
2011-07-22 4:30 ` Namhyung Kim
2011-07-21 2:32 ` [md PATCH 10/34] md/raid5: unify stripe_head_state and r6_state NeilBrown
2011-07-22 4:49 ` Namhyung Kim
2011-07-22 5:15 ` NeilBrown
2011-07-22 5:37 ` NeilBrown
2011-07-22 5:53 ` Namhyung Kim
2011-07-26 6:44 ` Namhyung Kim
2011-07-21 2:32 ` [md PATCH 06/34] md/raid5: Remove use of sh->lock in sync_request NeilBrown
2011-07-22 3:39 ` Namhyung Kim
2011-07-21 2:32 ` [md PATCH 11/34] md/raid5: add some more fields to stripe_head_state NeilBrown
2011-07-22 5:31 ` Namhyung Kim
2011-07-26 1:35 ` NeilBrown
2011-07-21 2:32 ` NeilBrown [this message]
2011-07-22 3:54 ` [md PATCH 07/34] md/raid5: Protect some more code with ->device_lock Namhyung Kim
2011-07-21 2:32 ` [md PATCH 08/34] md/raid5: replace sh->lock with an 'active' flag NeilBrown
2011-07-22 4:27 ` Namhyung Kim
2011-07-22 4:49 ` NeilBrown
2011-07-22 5:03 ` Namhyung Kim
2011-08-03 22:47 ` Dan Williams
2011-08-03 23:35 ` NeilBrown
2011-08-03 23:45 ` Williams, Dan J
2011-08-04 0:18 ` NeilBrown
2011-07-21 2:32 ` [md PATCH 04/34] md/raid5: use kmem_cache_zalloc() NeilBrown
2011-07-21 2:32 ` [md PATCH 17/34] md/raid5: unite handle_stripe_dirtying5 and handle_stripe_dirtying6 NeilBrown
2011-07-22 9:10 ` Namhyung Kim
2011-07-26 1:52 ` NeilBrown
2011-07-26 2:41 ` H. Peter Anvin
2011-07-26 9:40 ` David Brown
2011-07-26 13:23 ` Namhyung Kim
2011-07-26 15:01 ` David Brown
2011-07-21 2:32 ` [md PATCH 18/34] md/raid5: move more common code into handle_stripe NeilBrown
2011-07-22 9:20 ` Namhyung Kim
2011-07-21 2:32 ` [md PATCH 12/34] md/raid5: move stripe_head_state and more " NeilBrown
2011-07-22 5:41 ` Namhyung Kim
2011-07-21 2:32 ` [md PATCH 19/34] md/raid5: move some more common " NeilBrown
2011-07-22 9:29 ` Namhyung Kim
2011-07-26 1:59 ` NeilBrown
2011-07-21 2:32 ` [md PATCH 13/34] md/raid5: Move code for finishing a reconstruction " NeilBrown
2011-07-22 7:09 ` Namhyung Kim
2011-07-26 1:44 ` NeilBrown
2011-07-21 2:32 ` [md PATCH 16/34] md/raid5: unite fetch_block5 and fetch_block6 NeilBrown
2011-07-22 8:24 ` Namhyung Kim
2011-07-21 2:32 ` [md PATCH 14/34] md/raid5: move more code into common handle_stripe NeilBrown
2011-07-22 7:32 ` Namhyung Kim
2011-07-26 1:48 ` NeilBrown
2011-07-21 2:32 ` [md PATCH 15/34] md/raid5: rearrange a test in fetch_block6 NeilBrown
2011-07-22 7:37 ` Namhyung Kim
2011-07-21 2:32 ` [md PATCH 22/34] md/raid: use printk_ratelimited instead of printk_ratelimit NeilBrown
2011-07-21 2:32 ` [md PATCH 20/34] md/raid5: finalise new merged handle_stripe NeilBrown
2011-07-22 9:36 ` Namhyung Kim
2011-07-26 2:02 ` NeilBrown
2011-07-26 4:50 ` Namhyung Kim
2011-07-21 2:32 ` [md PATCH 25/34] md: change managed of recovery_disabled NeilBrown
2011-07-21 2:32 ` [md PATCH 24/34] md: remove ro check in md_check_recovery() NeilBrown
2011-07-21 2:32 ` [md PATCH 23/34] md: introduce link/unlink_rdev() helpers NeilBrown
2011-07-21 2:32 ` [md PATCH 21/34] md: use proper little-endian bitops NeilBrown
2011-07-21 2:32 ` [md PATCH 27/34] md/raid10: Improve decision on whether to fail a device with a read error NeilBrown
2011-07-21 2:32 ` [md PATCH 26/34] md/raid10: Make use of new recovery_disabled handling NeilBrown
2011-07-21 2:32 ` [md PATCH 33/34] MD: raid1 s/sysfs_notify_dirent/sysfs_notify_dirent_safe NeilBrown
2011-07-21 2:32 ` [md PATCH 32/34] md/raid5: Avoid BUG caused by multiple failures NeilBrown
2011-07-21 2:32 ` [md PATCH 31/34] md/raid10: move rdev->corrected_errors counting NeilBrown
2011-07-21 2:32 ` [md PATCH 34/34] MD bitmap: Revert DM dirty log hooks NeilBrown
2011-07-21 2:32 ` [md PATCH 30/34] md/raid5: move rdev->corrected_errors counting NeilBrown
2011-07-21 2:32 ` [md PATCH 29/34] md/raid1: " NeilBrown
2011-07-21 2:32 ` [md PATCH 28/34] md: get rid of unnecessary casts on page_address() NeilBrown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110721023225.6728.43609.stgit@notabene.brown \
--to=neilb@suse.de \
--cc=linux-raid@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).