linux-raid.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: NeilBrown <neilb@suse.de>
To: linux-raid@vger.kernel.org
Subject: [md PATCH 06/34] md/raid5: Remove use of sh->lock in sync_request
Date: Thu, 21 Jul 2011 12:32:25 +1000	[thread overview]
Message-ID: <20110721023225.6728.58904.stgit@notabene.brown> (raw)
In-Reply-To: <20110721022537.6728.90204.stgit@notabene.brown>

This is the start of a series of patches to remove sh->lock.

sync_request takes sh->lock before setting STRIPE_SYNCING to ensure
there is no race with testing it in handle_stripe[56].

Instead, use a new flag STRIPE_SYNC_REQUESTED and test it early
in handle_stripe[56] (after getting the same lock) and perform the
same set/clear operations if it was set.

Signed-off-by: NeilBrown <neilb@suse.de>
---

 drivers/md/raid5.c |   13 +++++++++----
 drivers/md/raid5.h |   33 ++++++++++++++++++---------------
 2 files changed, 27 insertions(+), 19 deletions(-)

diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index 7148064..f2f2ab3 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -3022,6 +3022,10 @@ static void handle_stripe5(struct stripe_head *sh)
 		 sh->reconstruct_state);
 
 	spin_lock(&sh->lock);
+	if (test_and_clear_bit(STRIPE_SYNC_REQUESTED, &sh->state)) {
+		set_bit(STRIPE_SYNCING, &sh->state);
+		clear_bit(STRIPE_INSYNC, &sh->state);
+	}
 	clear_bit(STRIPE_HANDLE, &sh->state);
 	clear_bit(STRIPE_DELAYED, &sh->state);
 
@@ -3313,6 +3317,10 @@ static void handle_stripe6(struct stripe_head *sh)
 	memset(&s, 0, sizeof(s));
 
 	spin_lock(&sh->lock);
+	if (test_and_clear_bit(STRIPE_SYNC_REQUESTED, &sh->state)) {
+		set_bit(STRIPE_SYNCING, &sh->state);
+		clear_bit(STRIPE_INSYNC, &sh->state);
+	}
 	clear_bit(STRIPE_HANDLE, &sh->state);
 	clear_bit(STRIPE_DELAYED, &sh->state);
 
@@ -4373,10 +4381,7 @@ static inline sector_t sync_request(mddev_t *mddev, sector_t sector_nr, int *ski
 
 	bitmap_start_sync(mddev->bitmap, sector_nr, &sync_blocks, still_degraded);
 
-	spin_lock(&sh->lock);
-	set_bit(STRIPE_SYNCING, &sh->state);
-	clear_bit(STRIPE_INSYNC, &sh->state);
-	spin_unlock(&sh->lock);
+	set_bit(STRIPE_SYNC_REQUESTED, &sh->state);
 
 	handle_stripe(sh);
 	release_stripe(sh);
diff --git a/drivers/md/raid5.h b/drivers/md/raid5.h
index 3ca77a2..a330011 100644
--- a/drivers/md/raid5.h
+++ b/drivers/md/raid5.h
@@ -289,21 +289,24 @@ struct r6_state {
 /*
  * Stripe state
  */
-#define STRIPE_HANDLE		2
-#define	STRIPE_SYNCING		3
-#define	STRIPE_INSYNC		4
-#define	STRIPE_PREREAD_ACTIVE	5
-#define	STRIPE_DELAYED		6
-#define	STRIPE_DEGRADED		7
-#define	STRIPE_BIT_DELAY	8
-#define	STRIPE_EXPANDING	9
-#define	STRIPE_EXPAND_SOURCE	10
-#define	STRIPE_EXPAND_READY	11
-#define	STRIPE_IO_STARTED	12 /* do not count towards 'bypass_count' */
-#define	STRIPE_FULL_WRITE	13 /* all blocks are set to be overwritten */
-#define	STRIPE_BIOFILL_RUN	14
-#define	STRIPE_COMPUTE_RUN	15
-#define	STRIPE_OPS_REQ_PENDING	16
+enum {
+	STRIPE_HANDLE,
+	STRIPE_SYNC_REQUESTED,
+	STRIPE_SYNCING,
+	STRIPE_INSYNC,
+	STRIPE_PREREAD_ACTIVE,
+	STRIPE_DELAYED,
+	STRIPE_DEGRADED,
+	STRIPE_BIT_DELAY,
+	STRIPE_EXPANDING,
+	STRIPE_EXPAND_SOURCE,
+	STRIPE_EXPAND_READY,
+	STRIPE_IO_STARTED,	/* do not count towards 'bypass_count' */
+	STRIPE_FULL_WRITE,	/* all blocks are set to be overwritten */
+	STRIPE_BIOFILL_RUN,
+	STRIPE_COMPUTE_RUN,
+	STRIPE_OPS_REQ_PENDING,
+};
 
 /*
  * Operation request flags



  parent reply	other threads:[~2011-07-21  2:32 UTC|newest]

Thread overview: 71+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-07-21  2:32 [md PATCH 00/34] md patches for 3.1 - part 1 NeilBrown
2011-07-21  2:32 ` [md PATCH 01/34] md/raid10: get rid of duplicated conditional expression NeilBrown
2011-07-21  2:32 ` [md PATCH 02/34] md/raid10: factor out common bio handling code NeilBrown
2011-07-21  2:32 ` [md PATCH 03/34] md/raid10: share pages between read and write bio's during recovery NeilBrown
2011-07-21  2:32 ` NeilBrown [this message]
2011-07-22  3:39   ` [md PATCH 06/34] md/raid5: Remove use of sh->lock in sync_request Namhyung Kim
2011-07-21  2:32 ` [md PATCH 11/34] md/raid5: add some more fields to stripe_head_state NeilBrown
2011-07-22  5:31   ` Namhyung Kim
2011-07-26  1:35     ` NeilBrown
2011-07-21  2:32 ` [md PATCH 04/34] md/raid5: use kmem_cache_zalloc() NeilBrown
2011-07-21  2:32 ` [md PATCH 08/34] md/raid5: replace sh->lock with an 'active' flag NeilBrown
2011-07-22  4:27   ` Namhyung Kim
2011-07-22  4:49     ` NeilBrown
2011-07-22  5:03       ` Namhyung Kim
2011-08-03 22:47   ` Dan Williams
2011-08-03 23:35     ` NeilBrown
2011-08-03 23:45       ` Williams, Dan J
2011-08-04  0:18         ` NeilBrown
2011-07-21  2:32 ` [md PATCH 07/34] md/raid5: Protect some more code with ->device_lock NeilBrown
2011-07-22  3:54   ` Namhyung Kim
2011-07-21  2:32 ` [md PATCH 05/34] md/raid5: get rid of duplicated call to bio_data_dir() NeilBrown
2011-07-21  2:32 ` [md PATCH 10/34] md/raid5: unify stripe_head_state and r6_state NeilBrown
2011-07-22  4:49   ` Namhyung Kim
2011-07-22  5:15     ` NeilBrown
2011-07-22  5:37       ` NeilBrown
2011-07-22  5:53         ` Namhyung Kim
2011-07-26  6:44           ` Namhyung Kim
2011-07-21  2:32 ` [md PATCH 09/34] md/raid5: move common code into handle_stripe NeilBrown
2011-07-22  4:30   ` Namhyung Kim
2011-07-21  2:32 ` [md PATCH 14/34] md/raid5: move more code into common handle_stripe NeilBrown
2011-07-22  7:32   ` Namhyung Kim
2011-07-26  1:48     ` NeilBrown
2011-07-21  2:32 ` [md PATCH 15/34] md/raid5: rearrange a test in fetch_block6 NeilBrown
2011-07-22  7:37   ` Namhyung Kim
2011-07-21  2:32 ` [md PATCH 16/34] md/raid5: unite fetch_block5 and fetch_block6 NeilBrown
2011-07-22  8:24   ` Namhyung Kim
2011-07-21  2:32 ` [md PATCH 12/34] md/raid5: move stripe_head_state and more code into handle_stripe NeilBrown
2011-07-22  5:41   ` Namhyung Kim
2011-07-21  2:32 ` [md PATCH 18/34] md/raid5: move more common " NeilBrown
2011-07-22  9:20   ` Namhyung Kim
2011-07-21  2:32 ` [md PATCH 17/34] md/raid5: unite handle_stripe_dirtying5 and handle_stripe_dirtying6 NeilBrown
2011-07-22  9:10   ` Namhyung Kim
2011-07-26  1:52     ` NeilBrown
2011-07-26  2:41       ` H. Peter Anvin
2011-07-26  9:40       ` David Brown
2011-07-26 13:23         ` Namhyung Kim
2011-07-26 15:01           ` David Brown
2011-07-21  2:32 ` [md PATCH 13/34] md/raid5: Move code for finishing a reconstruction into handle_stripe NeilBrown
2011-07-22  7:09   ` Namhyung Kim
2011-07-26  1:44     ` NeilBrown
2011-07-21  2:32 ` [md PATCH 19/34] md/raid5: move some more common code " NeilBrown
2011-07-22  9:29   ` Namhyung Kim
2011-07-26  1:59     ` NeilBrown
2011-07-21  2:32 ` [md PATCH 23/34] md: introduce link/unlink_rdev() helpers NeilBrown
2011-07-21  2:32 ` [md PATCH 27/34] md/raid10: Improve decision on whether to fail a device with a read error NeilBrown
2011-07-21  2:32 ` [md PATCH 21/34] md: use proper little-endian bitops NeilBrown
2011-07-21  2:32 ` [md PATCH 26/34] md/raid10: Make use of new recovery_disabled handling NeilBrown
2011-07-21  2:32 ` [md PATCH 25/34] md: change managed of recovery_disabled NeilBrown
2011-07-21  2:32 ` [md PATCH 20/34] md/raid5: finalise new merged handle_stripe NeilBrown
2011-07-22  9:36   ` Namhyung Kim
2011-07-26  2:02     ` NeilBrown
2011-07-26  4:50       ` Namhyung Kim
2011-07-21  2:32 ` [md PATCH 22/34] md/raid: use printk_ratelimited instead of printk_ratelimit NeilBrown
2011-07-21  2:32 ` [md PATCH 24/34] md: remove ro check in md_check_recovery() NeilBrown
2011-07-21  2:32 ` [md PATCH 30/34] md/raid5: move rdev->corrected_errors counting NeilBrown
2011-07-21  2:32 ` [md PATCH 28/34] md: get rid of unnecessary casts on page_address() NeilBrown
2011-07-21  2:32 ` [md PATCH 29/34] md/raid1: move rdev->corrected_errors counting NeilBrown
2011-07-21  2:32 ` [md PATCH 32/34] md/raid5: Avoid BUG caused by multiple failures NeilBrown
2011-07-21  2:32 ` [md PATCH 33/34] MD: raid1 s/sysfs_notify_dirent/sysfs_notify_dirent_safe NeilBrown
2011-07-21  2:32 ` [md PATCH 34/34] MD bitmap: Revert DM dirty log hooks NeilBrown
2011-07-21  2:32 ` [md PATCH 31/34] md/raid10: move rdev->corrected_errors counting NeilBrown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20110721023225.6728.58904.stgit@notabene.brown \
    --to=neilb@suse.de \
    --cc=linux-raid@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).