From: NeilBrown <neilb@suse.de>
To: linux-raid@vger.kernel.org
Cc: Namhyung Kim <namhyung@gmail.com>
Subject: [md PATCH 30/34] md/raid5: move rdev->corrected_errors counting
Date: Thu, 21 Jul 2011 12:32:28 +1000 [thread overview]
Message-ID: <20110721023228.6728.7610.stgit@notabene.brown> (raw)
In-Reply-To: <20110721022537.6728.90204.stgit@notabene.brown>
From: Namhyung Kim <namhyung@gmail.com>
Read errors are considered to corrected if write-back and re-read
cycle is finished without further problems. Thus moving the rdev->
corrected_errors counting after the re-reading looks more reasonable
IMHO.
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.de>
---
drivers/md/raid5.c | 5 +----
1 files changed, 1 insertions(+), 4 deletions(-)
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index 3c67942..ee26f50 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -547,10 +547,6 @@ static void ops_run_io(struct stripe_head *sh, struct stripe_head_state *s)
bi->bi_io_vec[0].bv_offset = 0;
bi->bi_size = STRIPE_SIZE;
bi->bi_next = NULL;
- if ((rw & WRITE) &&
- test_bit(R5_ReWrite, &sh->dev[i].flags))
- atomic_add(STRIPE_SECTORS,
- &rdev->corrected_errors);
generic_make_request(bi);
} else {
if (rw & WRITE)
@@ -1590,6 +1586,7 @@ static void raid5_end_read_request(struct bio * bi, int error)
(unsigned long long)(sh->sector
+ rdev->data_offset),
bdevname(rdev->bdev, b));
+ atomic_add(STRIPE_SECTORS, &rdev->corrected_errors);
clear_bit(R5_ReadError, &sh->dev[i].flags);
clear_bit(R5_ReWrite, &sh->dev[i].flags);
}
next prev parent reply other threads:[~2011-07-21 2:32 UTC|newest]
Thread overview: 71+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-07-21 2:32 [md PATCH 00/34] md patches for 3.1 - part 1 NeilBrown
2011-07-21 2:32 ` [md PATCH 02/34] md/raid10: factor out common bio handling code NeilBrown
2011-07-21 2:32 ` [md PATCH 01/34] md/raid10: get rid of duplicated conditional expression NeilBrown
2011-07-21 2:32 ` [md PATCH 03/34] md/raid10: share pages between read and write bio's during recovery NeilBrown
2011-07-21 2:32 ` [md PATCH 11/34] md/raid5: add some more fields to stripe_head_state NeilBrown
2011-07-22 5:31 ` Namhyung Kim
2011-07-26 1:35 ` NeilBrown
2011-07-21 2:32 ` [md PATCH 06/34] md/raid5: Remove use of sh->lock in sync_request NeilBrown
2011-07-22 3:39 ` Namhyung Kim
2011-07-21 2:32 ` [md PATCH 04/34] md/raid5: use kmem_cache_zalloc() NeilBrown
2011-07-21 2:32 ` [md PATCH 08/34] md/raid5: replace sh->lock with an 'active' flag NeilBrown
2011-07-22 4:27 ` Namhyung Kim
2011-07-22 4:49 ` NeilBrown
2011-07-22 5:03 ` Namhyung Kim
2011-08-03 22:47 ` Dan Williams
2011-08-03 23:35 ` NeilBrown
2011-08-03 23:45 ` Williams, Dan J
2011-08-04 0:18 ` NeilBrown
2011-07-21 2:32 ` [md PATCH 07/34] md/raid5: Protect some more code with ->device_lock NeilBrown
2011-07-22 3:54 ` Namhyung Kim
2011-07-21 2:32 ` [md PATCH 10/34] md/raid5: unify stripe_head_state and r6_state NeilBrown
2011-07-22 4:49 ` Namhyung Kim
2011-07-22 5:15 ` NeilBrown
2011-07-22 5:37 ` NeilBrown
2011-07-22 5:53 ` Namhyung Kim
2011-07-26 6:44 ` Namhyung Kim
2011-07-21 2:32 ` [md PATCH 09/34] md/raid5: move common code into handle_stripe NeilBrown
2011-07-22 4:30 ` Namhyung Kim
2011-07-21 2:32 ` [md PATCH 05/34] md/raid5: get rid of duplicated call to bio_data_dir() NeilBrown
2011-07-21 2:32 ` [md PATCH 14/34] md/raid5: move more code into common handle_stripe NeilBrown
2011-07-22 7:32 ` Namhyung Kim
2011-07-26 1:48 ` NeilBrown
2011-07-21 2:32 ` [md PATCH 15/34] md/raid5: rearrange a test in fetch_block6 NeilBrown
2011-07-22 7:37 ` Namhyung Kim
2011-07-21 2:32 ` [md PATCH 16/34] md/raid5: unite fetch_block5 and fetch_block6 NeilBrown
2011-07-22 8:24 ` Namhyung Kim
2011-07-21 2:32 ` [md PATCH 13/34] md/raid5: Move code for finishing a reconstruction into handle_stripe NeilBrown
2011-07-22 7:09 ` Namhyung Kim
2011-07-26 1:44 ` NeilBrown
2011-07-21 2:32 ` [md PATCH 19/34] md/raid5: move some more common code " NeilBrown
2011-07-22 9:29 ` Namhyung Kim
2011-07-26 1:59 ` NeilBrown
2011-07-21 2:32 ` [md PATCH 12/34] md/raid5: move stripe_head_state and more " NeilBrown
2011-07-22 5:41 ` Namhyung Kim
2011-07-21 2:32 ` [md PATCH 17/34] md/raid5: unite handle_stripe_dirtying5 and handle_stripe_dirtying6 NeilBrown
2011-07-22 9:10 ` Namhyung Kim
2011-07-26 1:52 ` NeilBrown
2011-07-26 2:41 ` H. Peter Anvin
2011-07-26 9:40 ` David Brown
2011-07-26 13:23 ` Namhyung Kim
2011-07-26 15:01 ` David Brown
2011-07-21 2:32 ` [md PATCH 18/34] md/raid5: move more common code into handle_stripe NeilBrown
2011-07-22 9:20 ` Namhyung Kim
2011-07-21 2:32 ` [md PATCH 21/34] md: use proper little-endian bitops NeilBrown
2011-07-21 2:32 ` [md PATCH 27/34] md/raid10: Improve decision on whether to fail a device with a read error NeilBrown
2011-07-21 2:32 ` [md PATCH 23/34] md: introduce link/unlink_rdev() helpers NeilBrown
2011-07-21 2:32 ` [md PATCH 26/34] md/raid10: Make use of new recovery_disabled handling NeilBrown
2011-07-21 2:32 ` [md PATCH 24/34] md: remove ro check in md_check_recovery() NeilBrown
2011-07-21 2:32 ` [md PATCH 25/34] md: change managed of recovery_disabled NeilBrown
2011-07-21 2:32 ` [md PATCH 20/34] md/raid5: finalise new merged handle_stripe NeilBrown
2011-07-22 9:36 ` Namhyung Kim
2011-07-26 2:02 ` NeilBrown
2011-07-26 4:50 ` Namhyung Kim
2011-07-21 2:32 ` [md PATCH 22/34] md/raid: use printk_ratelimited instead of printk_ratelimit NeilBrown
2011-07-21 2:32 ` [md PATCH 28/34] md: get rid of unnecessary casts on page_address() NeilBrown
2011-07-21 2:32 ` [md PATCH 29/34] md/raid1: move rdev->corrected_errors counting NeilBrown
2011-07-21 2:32 ` NeilBrown [this message]
2011-07-21 2:32 ` [md PATCH 34/34] MD bitmap: Revert DM dirty log hooks NeilBrown
2011-07-21 2:32 ` [md PATCH 31/34] md/raid10: move rdev->corrected_errors counting NeilBrown
2011-07-21 2:32 ` [md PATCH 33/34] MD: raid1 s/sysfs_notify_dirent/sysfs_notify_dirent_safe NeilBrown
2011-07-21 2:32 ` [md PATCH 32/34] md/raid5: Avoid BUG caused by multiple failures NeilBrown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110721023228.6728.7610.stgit@notabene.brown \
--to=neilb@suse.de \
--cc=linux-raid@vger.kernel.org \
--cc=namhyung@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).