From: NeilBrown <neilb@suse.de>
To: linux-raid@vger.kernel.org
Subject: [md PATCH 14/36] md/raid1: record badblocks found during resync etc.
Date: Thu, 21 Jul 2011 12:58:48 +1000 [thread overview]
Message-ID: <20110721025848.8422.35737.stgit@notabene.brown> (raw)
In-Reply-To: <20110721024556.8422.99443.stgit@notabene.brown>
If we find a bad block while writing as part of resync/recovery we
need to report that back to raid1d which must record the bad block,
or fail the device.
Similarly when fixing a read error, a further error should just
record a bad block if possible rather than failing the device.
Signed-off-by: NeilBrown <neilb@suse.de>
---
drivers/md/raid1.c | 81 +++++++++++++++++++++++++++++++++-------------------
1 files changed, 51 insertions(+), 30 deletions(-)
diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index 0ebeec9..83c918e 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -1387,7 +1387,9 @@ static void end_sync_write(struct bio *bio, int error)
s += sync_blocks;
sectors_to_go -= sync_blocks;
} while (sectors_to_go > 0);
- md_error(mddev, conf->mirrors[mirror].rdev);
+ set_bit(WriteErrorSeen,
+ &conf->mirrors[mirror].rdev->flags);
+ set_bit(R1BIO_WriteError, &r1_bio->state);
} else if (is_badblock(conf->mirrors[mirror].rdev,
r1_bio->sector,
r1_bio->sectors,
@@ -1398,7 +1400,8 @@ static void end_sync_write(struct bio *bio, int error)
if (atomic_dec_and_test(&r1_bio->remaining)) {
int s = r1_bio->sectors;
- if (test_bit(R1BIO_MadeGood, &r1_bio->state))
+ if (test_bit(R1BIO_MadeGood, &r1_bio->state) ||
+ test_bit(R1BIO_WriteError, &r1_bio->state))
reschedule_retry(r1_bio);
else {
put_buf(r1_bio);
@@ -1407,6 +1410,20 @@ static void end_sync_write(struct bio *bio, int error)
}
}
+static int r1_sync_page_io(mdk_rdev_t *rdev, sector_t sector,
+ int sectors, struct page *page, int rw)
+{
+ if (sync_page_io(rdev, sector, sectors << 9, page, rw, false))
+ /* success */
+ return 1;
+ if (rw == WRITE)
+ set_bit(WriteErrorSeen, &rdev->flags);
+ /* need to record an error - either for the block or the device */
+ if (!rdev_set_badblocks(rdev, sector, sectors, 0))
+ md_error(rdev->mddev, rdev);
+ return 0;
+}
+
static int fix_sync_read_error(r1bio_t *r1_bio)
{
/* Try some synchronous reads of other devices to get
@@ -1478,12 +1495,11 @@ static int fix_sync_read_error(r1bio_t *r1_bio)
if (r1_bio->bios[d]->bi_end_io != end_sync_read)
continue;
rdev = conf->mirrors[d].rdev;
- if (sync_page_io(rdev, sect, s<<9,
- bio->bi_io_vec[idx].bv_page,
- WRITE, false) == 0) {
+ if (r1_sync_page_io(rdev, sect, s,
+ bio->bi_io_vec[idx].bv_page,
+ WRITE) == 0) {
r1_bio->bios[d]->bi_end_io = NULL;
rdev_dec_pending(rdev, mddev);
- md_error(mddev, rdev);
}
}
d = start;
@@ -1494,11 +1510,9 @@ static int fix_sync_read_error(r1bio_t *r1_bio)
if (r1_bio->bios[d]->bi_end_io != end_sync_read)
continue;
rdev = conf->mirrors[d].rdev;
- if (sync_page_io(rdev, sect, s<<9,
- bio->bi_io_vec[idx].bv_page,
- READ, false) == 0)
- md_error(mddev, rdev);
- else
+ if (r1_sync_page_io(rdev, sect, s,
+ bio->bi_io_vec[idx].bv_page,
+ READ) != 0)
atomic_add(s, &rdev->corrected_errors);
}
sectors -= s;
@@ -1683,8 +1697,10 @@ static void fix_read_error(conf_t *conf, int read_disk,
} while (!success && d != read_disk);
if (!success) {
- /* Cannot read from anywhere -- bye bye array */
- md_error(mddev, conf->mirrors[read_disk].rdev);
+ /* Cannot read from anywhere - mark it bad */
+ mdk_rdev_t *rdev = conf->mirrors[read_disk].rdev;
+ if (!rdev_set_badblocks(rdev, sect, s, 0))
+ md_error(mddev, rdev);
break;
}
/* write it back and re-read */
@@ -1695,13 +1711,9 @@ static void fix_read_error(conf_t *conf, int read_disk,
d--;
rdev = conf->mirrors[d].rdev;
if (rdev &&
- test_bit(In_sync, &rdev->flags)) {
- if (sync_page_io(rdev, sect, s<<9,
- conf->tmppage, WRITE, false)
- == 0)
- /* Well, this device is dead */
- md_error(mddev, rdev);
- }
+ test_bit(In_sync, &rdev->flags))
+ r1_sync_page_io(rdev, sect, s,
+ conf->tmppage, WRITE);
}
d = start;
while (d != read_disk) {
@@ -1712,12 +1724,8 @@ static void fix_read_error(conf_t *conf, int read_disk,
rdev = conf->mirrors[d].rdev;
if (rdev &&
test_bit(In_sync, &rdev->flags)) {
- if (sync_page_io(rdev, sect, s<<9,
- conf->tmppage, READ, false)
- == 0)
- /* Well, this device is dead */
- md_error(mddev, rdev);
- else {
+ if (r1_sync_page_io(rdev, sect, s,
+ conf->tmppage, READ)) {
atomic_add(s, &rdev->corrected_errors);
printk(KERN_INFO
"md/raid1:%s: read error corrected "
@@ -1861,20 +1869,33 @@ static void raid1d(mddev_t *mddev)
mddev = r1_bio->mddev;
conf = mddev->private;
if (test_bit(R1BIO_IsSync, &r1_bio->state)) {
- if (test_bit(R1BIO_MadeGood, &r1_bio->state)) {
+ if (test_bit(R1BIO_MadeGood, &r1_bio->state) ||
+ test_bit(R1BIO_WriteError, &r1_bio->state)) {
int m;
int s = r1_bio->sectors;
for (m = 0; m < conf->raid_disks ; m++) {
+ mdk_rdev_t *rdev
+ = conf->mirrors[m].rdev;
struct bio *bio = r1_bio->bios[m];
- if (bio->bi_end_io != NULL &&
- test_bit(BIO_UPTODATE,
+ if (bio->bi_end_io == NULL)
+ continue;
+ if (test_bit(BIO_UPTODATE,
&bio->bi_flags)) {
- rdev = conf->mirrors[m].rdev;
rdev_clear_badblocks(
rdev,
r1_bio->sector,
r1_bio->sectors);
}
+ if (!test_bit(BIO_UPTODATE,
+ &bio->bi_flags) &&
+ test_bit(R1BIO_WriteError,
+ &r1_bio->state)) {
+ if (!rdev_set_badblocks(
+ rdev,
+ r1_bio->sector,
+ r1_bio->sectors, 0))
+ md_error(mddev, rdev);
+ }
}
put_buf(r1_bio);
md_done_sync(mddev, s, 1);
next prev parent reply other threads:[~2011-07-21 2:58 UTC|newest]
Thread overview: 65+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-07-21 2:58 [md PATCH 00/36] md patches for 3.1 - part 2: bad block logs NeilBrown
2011-07-21 2:58 ` [md PATCH 04/36] md: load/store badblock list from v1.x metadata NeilBrown
2011-07-22 16:34 ` Namhyung Kim
2011-07-21 2:58 ` [md PATCH 03/36] md: don't allow arrays to contain devices with bad blocks NeilBrown
2011-07-22 15:47 ` Namhyung Kim
2011-07-21 2:58 ` [md PATCH 02/36] md/bad-block-log: add sysfs interface for accessing bad-block-log NeilBrown
2011-07-22 15:43 ` Namhyung Kim
2011-07-26 2:29 ` NeilBrown
2011-07-26 5:17 ` Namhyung Kim
2011-07-26 8:48 ` Namhyung Kim
2011-07-26 15:03 ` [PATCH v2] md: add documentation for bad block log Namhyung Kim
2011-07-27 1:05 ` [md PATCH 02/36] md/bad-block-log: add sysfs interface for accessing bad-block-log NeilBrown
2011-07-21 2:58 ` [md PATCH 01/36] md: beginnings of bad block management NeilBrown
2011-07-22 15:03 ` Namhyung Kim
2011-07-26 2:26 ` NeilBrown
2011-07-26 5:17 ` Namhyung Kim
2011-07-22 16:52 ` Namhyung Kim
2011-07-26 3:20 ` NeilBrown
2011-07-21 2:58 ` [md PATCH 06/36] md/raid1: avoid reading from known bad blocks NeilBrown
2011-07-26 14:06 ` Namhyung Kim
2011-07-21 2:58 ` [md PATCH 11/36] md/raid1: clear bad-block record when write succeeds NeilBrown
2011-07-27 5:05 ` Namhyung Kim
2011-07-21 2:58 ` [md PATCH 12/36] md/raid1: store behind-write pages in bi_vecs NeilBrown
2011-07-27 15:16 ` Namhyung Kim
2011-07-21 2:58 ` [md PATCH 09/36] md: make it easier to wait for bad blocks to be acknowledged NeilBrown
2011-07-26 16:04 ` Namhyung Kim
2011-07-27 1:18 ` NeilBrown
2011-07-21 2:58 ` [md PATCH 10/36] md/raid1: avoid writing to known-bad blocks on known-bad drives NeilBrown
2011-07-27 4:09 ` Namhyung Kim
2011-07-27 4:19 ` NeilBrown
2011-07-21 2:58 ` [md PATCH 05/36] md: Disable bad blocks and v0.90 metadata NeilBrown
2011-07-22 17:02 ` Namhyung Kim
2011-07-21 2:58 ` NeilBrown [this message]
2011-07-27 15:39 ` [md PATCH 14/36] md/raid1: record badblocks found during resync etc Namhyung Kim
2011-07-21 2:58 ` [md PATCH 07/36] md/raid1: avoid reading known bad blocks during resync NeilBrown
2011-07-26 14:25 ` Namhyung Kim
2011-07-21 2:58 ` [md PATCH 13/36] md/raid1: Handle write errors by updating badblock log NeilBrown
2011-07-27 15:28 ` Namhyung Kim
2011-07-21 2:58 ` [md PATCH 08/36] md: add 'write_error' flag to component devices NeilBrown
2011-07-26 15:22 ` Namhyung Kim
2011-07-21 2:58 ` [md PATCH 17/36] md/raid5: avoid reading from known bad blocks NeilBrown
2011-07-21 2:58 ` [md PATCH 15/36] md/raid1: improve handling of read failure during recovery NeilBrown
2011-07-27 15:45 ` Namhyung Kim
2011-07-21 2:58 ` [md PATCH 21/36] md/raid5: Clear bad blocks on successful write NeilBrown
2011-07-21 2:58 ` [md PATCH 20/36] md/raid5. Don't write to known bad block on doubtful devices NeilBrown
2011-07-21 2:58 ` [md PATCH 22/36] md/raid10: simplify/reindent some loops NeilBrown
2011-07-21 2:58 ` [md PATCH 18/36] md/raid5: use bad-block log to improve handling of uncorrectable read errors NeilBrown
2011-07-21 2:58 ` [md PATCH 23/36] md/raid10: Split handle_read_error out from raid10d NeilBrown
2011-07-21 2:58 ` [md PATCH 19/36] md/raid5: write errors should be recorded as bad blocks if possible NeilBrown
2011-07-21 2:58 ` [md PATCH 16/36] md/raid1: factor several functions out or raid1d() NeilBrown
2011-07-27 15:55 ` Namhyung Kim
2011-07-28 1:39 ` NeilBrown
2011-07-21 2:58 ` [md PATCH 24/36] md/raid10: avoid reading from known bad blocks - part 1 NeilBrown
2011-07-21 2:58 ` [md PATCH 30/36] md/raid10: clear bad-block record when write succeeds NeilBrown
2011-07-21 2:58 ` [md PATCH 34/36] md/raid10: simplify read error handling during recovery NeilBrown
2011-07-21 2:58 ` [md PATCH 25/36] md/raid10: avoid reading from known bad blocks - part 2 NeilBrown
2011-07-21 2:58 ` [md PATCH 28/36] md/raid10 record bad blocks as needed during recovery NeilBrown
2011-07-21 2:58 ` [md PATCH 31/36] md/raid10: Handle write errors by updating badblock log NeilBrown
2011-07-21 2:58 ` [md PATCH 26/36] md/raid10 - avoid reading from known bad blocks - part 3 NeilBrown
2011-07-21 2:58 ` [md PATCH 32/36] md/raid10: attempt to fix read errors during resync/check NeilBrown
2011-07-21 2:58 ` [md PATCH 27/36] md/raid10: avoid reading known bad blocks during resync/recovery NeilBrown
2011-07-21 2:58 ` [md PATCH 29/36] md/raid10: avoid writing to known bad blocks on known bad drives NeilBrown
2011-07-21 2:58 ` [md PATCH 33/36] md/raid10: record bad blocks due to write errors during resync/recovery NeilBrown
2011-07-21 2:58 ` [md PATCH 35/36] md/raid10: Handle read errors during recovery better NeilBrown
2011-07-21 2:58 ` [md PATCH 36/36] md/raid10: handle further errors during fix_read_error better NeilBrown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110721025848.8422.35737.stgit@notabene.brown \
--to=neilb@suse.de \
--cc=linux-raid@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).