From: NeilBrown <neilb@suse.de>
To: linux-raid@vger.kernel.org
Subject: [md PATCH 14/16] md/raid5: recognise replacements when assembling array.
Date: Wed, 26 Oct 2011 12:43:01 +1100 [thread overview]
Message-ID: <20111026014301.21110.58312.stgit@notabene.brown> (raw)
In-Reply-To: <20111026014240.21110.28487.stgit@notabene.brown>
If a Replacement is seen, file it as such.
If we see two replacements (or two normal devices) for the one slot,
abort.
Signed-off-by: NeilBrown <neilb@suse.de>
---
drivers/md/raid5.c | 10 +++++++++-
1 files changed, 9 insertions(+), 1 deletions(-)
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index 6c22f09..efe3679 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -4824,7 +4824,15 @@ static struct r5conf *setup_conf(struct mddev *mddev)
continue;
disk = conf->disks + raid_disk;
- disk->rdev = rdev;
+ if (test_bit(Replacement, &rdev->flags)) {
+ if (disk->replacement)
+ goto abort;
+ disk->replacement = rdev;
+ } else {
+ if (disk->rdev)
+ goto abort;
+ disk->rdev = rdev;
+ }
if (test_bit(In_sync, &rdev->flags)) {
char b[BDEVNAME_SIZE];
next prev parent reply other threads:[~2011-10-26 1:43 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-10-26 1:43 [md PATCH 00/16] hot-replace support for RAID4/5/6 NeilBrown
2011-10-26 1:43 ` [md PATCH 02/16] md: take after reference to mddev during sysfs access NeilBrown
2011-10-26 1:43 ` [md PATCH 04/16] md: change hot_remove_disk to take an rdev rather than a number NeilBrown
2011-10-26 1:43 ` [md PATCH 03/16] md: remove test for duplicate device when setting slot number NeilBrown
2011-10-26 1:43 ` [md PATCH 01/16] md: refine interpretation of "hold_active == UNTIL_IOCTL" NeilBrown
2011-10-26 1:43 ` [md PATCH 12/16] md/raid5: detect and handle replacements during recovery NeilBrown
2011-10-26 1:43 ` [md PATCH 09/16] md/raid5: preferentially read from replacement device if possible NeilBrown
2011-10-26 1:43 ` [md PATCH 10/16] md/raid5: allow removal for failed replacement devices NeilBrown
2011-10-26 1:43 ` [md PATCH 05/16] md: create externally visible flags for supporting hot-replace NeilBrown
2011-10-26 1:43 ` [md PATCH 06/16] md/raid5: allow each slot to have an extra replacement device NeilBrown
2011-10-26 1:43 ` NeilBrown [this message]
2011-10-26 1:43 ` [md PATCH 07/16] md/raid5: raid5.h cleanup NeilBrown
2011-10-26 1:43 ` [md PATCH 08/16] md/raid5: remove redundant bio initialisations NeilBrown
2011-10-26 1:43 ` [md PATCH 11/16] md/raid5: writes should get directed to replacement as well as original NeilBrown
2011-10-26 1:43 ` [md PATCH 13/16] md/raid5: handle activation of replacement device when recovery completes NeilBrown
2011-10-26 1:43 ` [md PATCH 16/16] md/raid5: Mark device replaceable when we see a write error NeilBrown
2011-10-26 1:43 ` [md PATCH 15/16] md/raid5: If there is a spare and a replaceable device, start replacement NeilBrown
2011-10-26 6:38 ` [md PATCH 00/16] hot-replace support for RAID4/5/6 David Brown
2011-10-26 7:42 ` NeilBrown
2011-10-26 9:01 ` John Robinson
2011-10-26 13:57 ` Peter W. Morreale
2011-10-26 17:27 ` Piergiorgio Sartor
2011-10-27 17:10 ` Peter W. Morreale
2011-10-27 20:44 ` NeilBrown
2011-10-27 20:53 ` Peter W. Morreale
2011-12-14 22:18 ` Dan Williams
2011-12-15 6:18 ` NeilBrown
2011-12-15 7:14 ` Williams, Dan J
2011-12-20 5:18 ` NeilBrown
2011-12-22 20:54 ` Alexander Kühn
2011-12-22 21:14 ` NeilBrown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20111026014301.21110.58312.stgit@notabene.brown \
--to=neilb@suse.de \
--cc=linux-raid@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).