From: NeilBrown <neilb@suse.de>
To: linux-raid@vger.kernel.org
Subject: [md PATCH 10/17] md/raid10: If there is a spare and a replaceable device, start replacement.
Date: Wed, 02 Nov 2011 16:25:44 +1100 [thread overview]
Message-ID: <20111102052544.17566.73807.stgit@notabene.brown> (raw)
In-Reply-To: <20111102051851.17566.52748.stgit@notabene.brown>
When attempting to add a spare to a RAID10 array, also consider
adding it as a replacement for a replaceable device.
Signed-off-by: NeilBrown <neilb@suse.de>
---
drivers/md/raid10.c | 40 ++++++++++++++++++++++++++++++++++++----
1 files changed, 36 insertions(+), 4 deletions(-)
diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c
index 15e3f73..5993615 100644
--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -418,6 +418,9 @@ static void raid10_end_write_request(struct bio *bio, int error)
md_error(rdev->mddev, rdev);
else {
set_bit(WriteErrorSeen, &rdev->flags);
+ if (!test_and_set_bit(Replaceable, &rdev->flags))
+ set_bit(MD_RECOVERY_NEEDED,
+ &rdev->mddev->recovery);
set_bit(R10BIO_WriteError, &r10_bio->state);
dec_rdev = 0;
}
@@ -1483,8 +1486,25 @@ static int raid10_add_disk(struct mddev *mddev, struct md_rdev *rdev)
struct mirror_info *p = &conf->mirrors[mirror];
if (p->recovery_disabled == mddev->recovery_disabled)
continue;
- if (p->rdev)
- continue;
+ if (p->rdev) {
+ if (!test_bit(Replaceable, &p->rdev->flags) ||
+ p->replacement != NULL)
+ continue;
+ clear_bit(In_sync, &rdev->flags);
+ set_bit(Replacement, &rdev->flags);
+ rdev->raid_disk = mirror;
+ err = 0;
+ disk_stack_limits(mddev->gendisk, rdev->bdev,
+ rdev->data_offset << 9);
+ if (rdev->bdev->bd_disk->queue->merge_bvec_fn) {
+ blk_queue_max_segments(mddev->queue, 1);
+ blk_queue_segment_boundary(mddev->queue,
+ PAGE_CACHE_SIZE - 1);
+ }
+ conf->fullsync = 1;
+ rcu_assign_pointer(p->replacement, rdev);
+ break;
+ }
disk_stack_limits(mddev->gendisk, rdev->bdev,
rdev->data_offset << 9);
@@ -1660,6 +1680,9 @@ static void end_sync_write(struct bio *bio, int error)
md_error(mddev, rdev);
else {
set_bit(WriteErrorSeen, &rdev->flags);
+ if (!test_and_set_bit(Replaceable, &rdev->flags))
+ set_bit(MD_RECOVERY_NEEDED,
+ &rdev->mddev->recovery);
set_bit(R10BIO_WriteError, &r10_bio->state);
}
} else if (is_badblock(rdev,
@@ -1854,8 +1877,13 @@ static void fix_recovery_read_error(struct r10bio *r10_bio)
s << 9,
bio->bi_io_vec[idx].bv_page,
WRITE, false);
- if (!ok)
+ if (!ok) {
set_bit(WriteErrorSeen, &rdev->flags);
+ if (!test_and_set_bit(Replaceable,
+ &rdev->flags))
+ set_bit(MD_RECOVERY_NEEDED,
+ &rdev->mddev->recovery);
+ }
}
if (!ok) {
/* We don't worry if we cannot set a bad block -
@@ -1973,8 +2001,12 @@ static int r10_sync_page_io(struct md_rdev *rdev, sector_t sector,
if (sync_page_io(rdev, sector, sectors << 9, page, rw, false))
/* success */
return 1;
- if (rw == WRITE)
+ if (rw == WRITE) {
set_bit(WriteErrorSeen, &rdev->flags);
+ if (!test_and_set_bit(Replaceable, &rdev->flags))
+ set_bit(MD_RECOVERY_NEEDED,
+ &rdev->mddev->recovery);
+ }
/* need to record an error - either for the block or the device */
if (!rdev_set_badblocks(rdev, sector, sectors, 0))
md_error(rdev->mddev, rdev);
next prev parent reply other threads:[~2011-11-02 5:25 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-11-02 5:25 [md PATCH 00/17] hot-replace support for RAID1 and RAID10 NeilBrown
2011-11-02 5:25 ` [md PATCH 01/17] md/raid10: prepare data structures for handling replacement NeilBrown
2011-11-02 5:25 ` [md PATCH 04/17] md/raid10: allow removal of failed replacement devices NeilBrown
2011-11-02 5:25 ` [md PATCH 02/17] md/raid10: change read_balance to return an rdev NeilBrown
2011-11-02 5:25 ` [md PATCH 03/17] md/raid10: preferentially read from replacement device if possible NeilBrown
2011-11-02 5:25 ` [md PATCH 07/17] md/raid10: handle recovery of replacement devices NeilBrown
2011-11-02 5:25 ` [md PATCH 12/17] md/raid1: Allocate spare to store replacement devices and their bios NeilBrown
2011-11-02 5:25 ` [md PATCH 15/17] md/raid1: recognise replacements when assembling arrays NeilBrown
2011-11-02 5:25 ` [md PATCH 06/17] md/raid10: Handle replacement devices during resync NeilBrown
2011-11-02 5:25 ` [md PATCH 13/17] md/raid1: Allow a failed replacement device to be removed NeilBrown
2011-11-02 5:25 ` NeilBrown [this message]
2011-11-02 5:25 ` [md PATCH 05/17] md/raid10: writes should get directed to replacement as well as original NeilBrown
2011-11-02 5:25 ` [md PATCH 08/17] md/raid10: Allow replacement device to be replace old drive NeilBrown
2011-11-02 5:25 ` [md PATCH 14/17] md/raid1: handle activation of replacement device when recovery completes NeilBrown
2011-11-02 5:25 ` [md PATCH 09/17] md/raid10: recognise replacements when assembling array NeilBrown
2011-11-02 5:25 ` [md PATCH 11/17] md/raid1: Replace use of mddev->raid_disks with conf->raid_disks NeilBrown
2011-11-02 5:25 ` [md PATCH 16/17] md/raid1: If there is a spare and a replaceable device, start replacement NeilBrown
2011-11-02 5:25 ` [md PATCH 17/17] md/raid1: Mark device replaceable when we see a write error NeilBrown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20111102052544.17566.73807.stgit@notabene.brown \
--to=neilb@suse.de \
--cc=linux-raid@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).