From: Shaohua Li <shli@fusionio.com>
To: linux-kernel@vger.kernel.org, linux-raid@vger.kernel.org
Cc: neilb@suse.de, axboe@kernel.dk, vgoyal@redhat.com,
martin.petersen@oracle.com, Shaohua Li <shli@fusionio.com>
Subject: [patch v2 4/6] md: raid 0 supports TRIM
Date: Fri, 16 Mar 2012 15:32:17 +0800 [thread overview]
Message-ID: <20120316073512.671665097@fusionio.com> (raw)
In-Reply-To: 20120316073213.656519005@fusionio.com
[-- Attachment #1: md-raid0-discard-support.patch --]
[-- Type: text/plain, Size: 2432 bytes --]
This makes md raid 0 support TRIM.
Signed-off-by: Shaohua Li <shli@fusionio.com>
---
drivers/md/raid0.c | 19 ++++++++++++++++++-
1 file changed, 18 insertions(+), 1 deletion(-)
Index: linux/drivers/md/raid0.c
===================================================================
--- linux.orig/drivers/md/raid0.c 2012-03-14 09:16:37.360435113 +0800
+++ linux/drivers/md/raid0.c 2012-03-14 09:32:11.017262138 +0800
@@ -88,6 +88,7 @@ static int create_strip_zones(struct mdd
char b[BDEVNAME_SIZE];
char b2[BDEVNAME_SIZE];
struct r0conf *conf = kzalloc(sizeof(*conf), GFP_KERNEL);
+ bool discard_supported = false;
if (!conf)
return -ENOMEM;
@@ -201,6 +202,9 @@ static int create_strip_zones(struct mdd
if (!smallest || (rdev1->sectors < smallest->sectors))
smallest = rdev1;
cnt++;
+
+ if (blk_queue_discard(bdev_get_queue(rdev1->bdev)))
+ discard_supported = true;
}
if (cnt != mddev->raid_disks) {
printk(KERN_ERR "md/raid0:%s: too few disks (%d of %d) - "
@@ -278,6 +282,11 @@ static int create_strip_zones(struct mdd
blk_queue_io_opt(mddev->queue,
(mddev->chunk_sectors << 9) * mddev->raid_disks);
+ if (!discard_supported)
+ queue_flag_clear_unlocked(QUEUE_FLAG_DISCARD, mddev->queue);
+ else
+ queue_flag_set_unlocked(QUEUE_FLAG_DISCARD, mddev->queue);
+
pr_debug("md/raid0:%s: done.\n", mdname(mddev));
*private_conf = conf;
@@ -348,6 +357,7 @@ static int raid0_run(struct mddev *mddev
if (md_check_no_bitmap(mddev))
return -EINVAL;
blk_queue_max_hw_sectors(mddev->queue, mddev->chunk_sectors);
+ blk_queue_max_discard_sectors(mddev->queue, mddev->chunk_sectors);
/* if private is not null, we are here after takeover */
if (mddev->private == NULL) {
@@ -486,7 +496,7 @@ static void raid0_make_request(struct md
sector_t sector = bio->bi_sector;
struct bio_pair *bp;
/* Sanity check -- queue functions should prevent this happening */
- if (bio->bi_vcnt != 1 ||
+ if ((bio->bi_vcnt != 1 && bio->bi_vcnt != 0) ||
bio->bi_idx != 0)
goto bad_map;
/* This is a one page bio that upper layers
@@ -512,6 +522,13 @@ static void raid0_make_request(struct md
bio->bi_sector = sector_offset + zone->dev_start +
tmp_dev->data_offset;
+ if (unlikely((bio->bi_rw & REQ_DISCARD) &&
+ !blk_queue_discard(bdev_get_queue(bio->bi_bdev)))) {
+ /* Just ignore it */
+ bio_endio(bio, 0);
+ return;
+ }
+
generic_make_request(bio);
return;
next prev parent reply other threads:[~2012-03-16 7:32 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-03-16 7:32 [patch v2 0/6] Add TRIM support for raid linear/0/1/10 Shaohua Li
2012-03-16 7:32 ` [patch v2 1/6] block: makes bio_split support bio without data Shaohua Li
2012-03-16 7:32 ` [patch v2 2/6] blk: dont allow discard request merge temporarily Shaohua Li
2012-03-20 16:21 ` Vivek Goyal
2012-03-21 1:22 ` Shaohua Li
2012-03-22 2:18 ` Martin K. Petersen
2012-03-22 2:33 ` Shaohua Li
2012-03-22 6:28 ` Christoph Hellwig
2012-03-16 7:32 ` [patch v2 3/6] md: linear supports TRIM Shaohua Li
2012-03-16 7:32 ` Shaohua Li [this message]
2012-03-16 7:32 ` [patch v2 5/6] md: raid 1 " Shaohua Li
2012-03-16 7:32 ` [patch v2 6/6] md: raid 10 " Shaohua Li
2012-03-19 19:38 ` [patch v2 0/6] Add TRIM support for raid linear/0/1/10 Holger Kiehl
2012-03-20 1:27 ` Shaohua Li
2012-03-20 9:50 ` Holger Kiehl
2012-03-20 12:09 ` Shaohua Li
2012-03-21 2:08 ` Shaohua Li
2012-03-21 2:24 ` Roberto Spadim
2012-03-21 2:29 ` Mathias Burén
2012-03-21 2:29 ` Mathias Burén
2012-05-08 9:59 ` Patelczyk, Maciej
2012-05-09 2:27 ` Shaohua Li
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120316073512.671665097@fusionio.com \
--to=shli@fusionio.com \
--cc=axboe@kernel.dk \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-raid@vger.kernel.org \
--cc=martin.petersen@oracle.com \
--cc=neilb@suse.de \
--cc=vgoyal@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).