From: NeilBrown <neilb@suse.de>
To: Jianpeng Ma <majianpeng@gmail.com>
Cc: shli <shli@kernel.org>, linux-raid <linux-raid@vger.kernel.org>
Subject: Re: [patch 2/2 v3]raid5: create multiple threads to handle stripes
Date: Wed, 26 Sep 2012 11:26:51 +1000 [thread overview]
Message-ID: <20120926112651.728e8452@notabene.brown> (raw)
In-Reply-To: <201209241914270784655@gmail.com>
[-- Attachment #1: Type: text/plain, Size: 4874 bytes --]
On Mon, 24 Sep 2012 19:15:12 +0800 "Jianpeng Ma" <majianpeng@gmail.com> wrote:
> Sorry for using this title to send this.
It isn't hard to change the Subject line for the Email, is it?
> This code maybe error,so it should correct(If multiple-thread dosen't enable,it maybe also error,but no obviously).
> In func handle_parity_checks5:
> >>conf->mddev->resync_mismatches += STRIPE_SECTORS;
> If multi-thread handle stripe on different cpu, there will be raced on resync_mismatches.
>
> So the patch is:
>
> Subject: [PATCH] md:change resync_mismatches to atomic64_t to avoid races
I doubt this is really necessary, as resync_mismatches doesn't need to be
precise.
But it doesn't really hurt either, so I've applied it.
Thanks,
NeilBrown
>
> Signed-off-by: Jianpeng Ma <majianpeng@gmail.com>
> ---
> drivers/md/md.c | 7 ++++---
> drivers/md/md.h | 2 +-
> drivers/md/raid1.c | 2 +-
> drivers/md/raid10.c | 2 +-
> drivers/md/raid5.c | 4 ++--
> 5 files changed, 9 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/md/md.c b/drivers/md/md.c
> index 308e87b..b0b9474 100644
> --- a/drivers/md/md.c
> +++ b/drivers/md/md.c
> @@ -4278,7 +4278,8 @@ static ssize_t
> mismatch_cnt_show(struct mddev *mddev, char *page)
> {
> return sprintf(page, "%llu\n",
> - (unsigned long long) mddev->resync_mismatches);
> + (unsigned long long)
> + atomic64_read(&mddev->resync_mismatches));
> }
>
> static struct md_sysfs_entry md_scan_mode =
> @@ -5245,7 +5246,7 @@ static void md_clean(struct mddev *mddev)
> mddev->new_layout = 0;
> mddev->new_chunk_sectors = 0;
> mddev->curr_resync = 0;
> - mddev->resync_mismatches = 0;
> + atomic64_set(&mddev->resync_mismatches, 0);
> mddev->suspend_lo = mddev->suspend_hi = 0;
> mddev->sync_speed_min = mddev->sync_speed_max = 0;
> mddev->recovery = 0;
> @@ -7349,7 +7350,7 @@ void md_do_sync(struct mddev *mddev)
> * which defaults to physical size, but can be virtual size
> */
> max_sectors = mddev->resync_max_sectors;
> - mddev->resync_mismatches = 0;
> + atomic64_set(&mddev->resync_mismatches, 0);
> /* we don't use the checkpoint if there's a bitmap */
> if (test_bit(MD_RECOVERY_REQUESTED, &mddev->recovery))
> j = mddev->resync_min;
> diff --git a/drivers/md/md.h b/drivers/md/md.h
> index f385b03..8f341d8 100644
> --- a/drivers/md/md.h
> +++ b/drivers/md/md.h
> @@ -282,7 +282,7 @@ struct mddev {
>
> sector_t resync_max_sectors; /* may be set by personality */
>
> - sector_t resync_mismatches; /* count of sectors where
> + atomic64_t resync_mismatches; /* count of sectors where
> * parity/replica mismatch found
> */
>
> diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
> index 611b5f7..ebceb98 100644
> --- a/drivers/md/raid1.c
> +++ b/drivers/md/raid1.c
> @@ -1867,7 +1867,7 @@ static int process_checks(struct r1bio *r1_bio)
> } else
> j = 0;
> if (j >= 0)
> - mddev->resync_mismatches += r1_bio->sectors;
> + atomic64_add(r1_bio->sectors, &mddev->resync_mismatches);
> if (j < 0 || (test_bit(MD_RECOVERY_CHECK, &mddev->recovery)
> && test_bit(BIO_UPTODATE, &sbio->bi_flags))) {
> /* No need to write to this device. */
> diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c
> index 1c2eb38..ad0a8b7 100644
> --- a/drivers/md/raid10.c
> +++ b/drivers/md/raid10.c
> @@ -1950,7 +1950,7 @@ static void sync_request_write(struct mddev *mddev, struct r10bio *r10_bio)
> break;
> if (j == vcnt)
> continue;
> - mddev->resync_mismatches += r10_bio->sectors;
> + atomic64_add(r10_bio->sectors, &mddev->resync_mismatches);
> if (test_bit(MD_RECOVERY_CHECK, &mddev->recovery))
> /* Don't fix anything. */
> continue;
> diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
> index 7031b86..0a2702f 100644
> --- a/drivers/md/raid5.c
> +++ b/drivers/md/raid5.c
> @@ -2931,7 +2931,7 @@ static void handle_parity_checks5(struct r5conf *conf, struct stripe_head *sh,
> */
> set_bit(STRIPE_INSYNC, &sh->state);
> else {
> - conf->mddev->resync_mismatches += STRIPE_SECTORS;
> + atomic64_add(STRIPE_SECTORS, &conf->mddev->resync_mismatches);
> if (test_bit(MD_RECOVERY_CHECK, &conf->mddev->recovery))
> /* don't try to repair!! */
> set_bit(STRIPE_INSYNC, &sh->state);
> @@ -3083,7 +3083,7 @@ static void handle_parity_checks6(struct r5conf *conf, struct stripe_head *sh,
> */
> }
> } else {
> - conf->mddev->resync_mismatches += STRIPE_SECTORS;
> + atomic64_add(STRIPE_SECTORS, &conf->mddev->resync_mismatches);
> if (test_bit(MD_RECOVERY_CHECK, &conf->mddev->recovery))
> /* don't try to repair!! */
> set_bit(STRIPE_INSYNC, &sh->state);
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 828 bytes --]
next prev parent reply other threads:[~2012-09-26 1:26 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-08-09 8:58 [patch 2/2 v3]raid5: create multiple threads to handle stripes Shaohua Li
2012-08-11 8:45 ` Jianpeng Ma
2012-08-13 0:21 ` Shaohua Li
2012-08-13 1:06 ` Jianpeng Ma
2012-08-13 2:13 ` Shaohua Li
2012-08-13 2:20 ` Shaohua Li
2012-08-13 2:25 ` Jianpeng Ma
2012-08-13 4:21 ` NeilBrown
2012-08-14 10:39 ` Jianpeng Ma
2012-08-15 3:51 ` Shaohua Li
2012-08-15 6:21 ` Jianpeng Ma
2012-08-15 8:04 ` Shaohua Li
2012-08-15 8:19 ` Jianpeng Ma
2012-09-24 11:15 ` Jianpeng Ma
2012-09-26 1:26 ` NeilBrown [this message]
2012-08-13 9:11 ` Jianpeng Ma
2012-08-13 4:29 ` NeilBrown
2012-08-13 6:22 ` Shaohua Li
2013-03-07 7:31 ` Shaohua Li
2013-03-12 1:39 ` NeilBrown
2013-03-13 0:44 ` Stan Hoeppner
2013-03-28 6:47 ` NeilBrown
2013-03-28 16:53 ` Stan Hoeppner
2013-03-29 2:34 ` Shaohua Li
2013-03-29 9:36 ` Stan Hoeppner
2013-04-01 1:57 ` Shaohua Li
2013-04-01 19:31 ` Stan Hoeppner
2013-04-02 0:39 ` Shaohua Li
2013-04-02 3:12 ` Stan Hoeppner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120926112651.728e8452@notabene.brown \
--to=neilb@suse.de \
--cc=linux-raid@vger.kernel.org \
--cc=majianpeng@gmail.com \
--cc=shli@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).