From: majianpeng <majianpeng@gmail.com>
To: NeilBrown <neilb@suse.de>
Cc: linux-raid <linux-raid@vger.kernel.org>
Subject: Re: Re: [PATCH V1] md:For aborted a resync by request,using ->curr_resync as the last completed request rather than ->curr_resync_completed.
Date: Tue, 20 Nov 2012 09:06:06 +0800 [thread overview]
Message-ID: <201211200906034247120@gmail.com> (raw)
In-Reply-To: 20121120090725.7de3348a@notabene.brown
>On Mon, 19 Nov 2012 19:57:34 +0800 majianpeng <majianpeng@gmail.com> wrote:
>
>> V0-->V1:
>> As suggested by neil, it added a flag MD_RECOVERY_ERROR to differentiate between an
>> abort-due-to-error and an abort-due-to-request.We only deal with the later case.
>>
>> Thanks!
>> Jianpeng
>>
>> Aborting a resync maybe by io-error,or request(stop array or reboot
>> system).
>> So we add a flag MD_RECOVERY_ERROR to differentiate between an
>> abort-due-to-error and an abort-due-to-request.
>> For the later case,when resync aborted,it exec
>> wait_event(mddev->recovery_wait, !atomic_read(&mddev->recovery_active)).
>> So the ->curr_resync is the last completed request.
>>
>> Signed-off-by: Jianpeng Ma <majianpeng@gmail.com>
>> ---
>> drivers/md/md.c | 10 ++++++++--
>> drivers/md/md.h | 2 ++
>> 2 files changed, 10 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/md/md.c b/drivers/md/md.c
>> index 9ab768a..5199657 100644
>> --- a/drivers/md/md.c
>> +++ b/drivers/md/md.c
>> @@ -7172,6 +7172,7 @@ void md_done_sync(struct mddev *mddev, int blocks, int ok)
>> wake_up(&mddev->recovery_wait);
>> if (!ok) {
>> set_bit(MD_RECOVERY_INTR, &mddev->recovery);
>> + set_bit(MD_RECOVERY_ERROR, &mddev->recovery);
>> md_wakeup_thread(mddev->thread);
>> // stop recovery, signal do_sync ....
>> }
>> @@ -7558,8 +7559,13 @@ void md_do_sync(struct md_thread *thread)
>> printk(KERN_INFO
>> "md: checkpointing %s of %s.\n",
>> desc, mdname(mddev));
>> - mddev->recovery_cp =
>> - mddev->curr_resync_completed;
>> + if (test_bit(MD_RECOVERY_ERROR,
>> + &mddev->recovery_cp))
>> + mddev->recovery_cp =
>> + mddev->curr_resync_completed;
>> + else
>> + mddev->recovery_cp =
>> + mddev->curr_resync;
>> }
>> } else
>> mddev->recovery_cp = MaxSector;
>> diff --git a/drivers/md/md.h b/drivers/md/md.h
>> index af443ab..c29e62e 100644
>> --- a/drivers/md/md.h
>> +++ b/drivers/md/md.h
>> @@ -307,6 +307,7 @@ struct mddev {
>> * REQUEST: user-space has requested a sync (used with SYNC)
>> * CHECK: user-space request for check-only, no repair
>> * RESHAPE: A reshape is happening
>> + * ERROR: sync-action interrupted because io-error
>> *
>> * If neither SYNC or RESHAPE are set, then it is a recovery.
>> */
>> @@ -320,6 +321,7 @@ struct mddev {
>> #define MD_RECOVERY_CHECK 7
>> #define MD_RECOVERY_RESHAPE 8
>> #define MD_RECOVERY_FROZEN 9
>> +#define MD_RECOVERY_ERROR 10
>>
>> unsigned long recovery;
>> /* If a RAID personality determines that recovery (of a particular
>
>
>
>The attachment still have MS-windows line endings ("\r\n" instead of just
>"\n") but it wasn't too hard to strip those out.
>
>Applied, thanks,
>NeilBrown
>
>
Sorry for that, i will check it and fix.
Thanks!
Jianpeng
prev parent reply other threads:[~2012-11-20 1:06 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-11-19 11:57 [PATCH V1] md:For aborted a resync by request,using ->curr_resync as the last completed request rather than ->curr_resync_completed majianpeng
2012-11-19 22:07 ` NeilBrown
2012-11-20 1:06 ` majianpeng [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201211200906034247120@gmail.com \
--to=majianpeng@gmail.com \
--cc=linux-raid@vger.kernel.org \
--cc=neilb@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).