Re: [PATCH] tests/10ddf-fail-two-spares: new unit test

[NeilBrown <neilb@suse.de>]

[-- Attachment #1: Type: text/plain, Size: 2946 bytes --]

On Wed,  7 Aug 2013 22:38:03 +0200 mwilck@arcor.de wrote:

> This is one more unit test for failure/recovery, this time with
> double redundancy, which isn't covered by the other tests.
> ---
>  tests/10ddf-fail-two-spares |   85 +++++++++++++++++++++++++++++++++++++++++++
>  1 files changed, 85 insertions(+), 0 deletions(-)
>  create mode 100644 tests/10ddf-fail-two-spares
> 
> diff --git a/tests/10ddf-fail-two-spares b/tests/10ddf-fail-two-spares
> new file mode 100644
> index 0000000..cc2cbb4
> --- /dev/null
> +++ b/tests/10ddf-fail-two-spares
> @@ -0,0 +1,85 @@
> +# Simulate two disks failing shorty after each other
> +. tests/env-ddf-template
> +tmp=$(mktemp /tmp/mdtest-XXXXXX)
> +
> +mdadm --zero-superblock $dev8 $dev9 $dev10 $dev11 $dev12 $dev13
> +mdadm -CR $container -e ddf -l container -n 6 \
> +      $dev8 $dev9 $dev10 $dev11 $dev12 $dev13
> +
> +#fast_sync
> +
> +mdadm -CR $member0 -l raid6 -n 4 $dev10 $dev11 $dev12 $dev13 -z 16384
> +#$dir/mdadm -CR $member0 -l raid6 -n 4 $dev10 $dev11 $dev12 $dev13  -z 16384 \
> +#	    >/tmp/mdmon.txt 2>&1
> +mdadm -CR $member1 -l raid10 -n 4 $dev10 $dev11 $dev12 $dev13 -z 16384
> +
> +dd if=/dev/sda of=$member0 bs=1M
> +dd if=/dev/sda of=$member1 bs=1M skip=16
> +
> +check wait
> +
> +sum0=$(sha1sum $member0)
> +sum1=$(sha1sum $member1)
> +
> +mdadm --fail $member1 $dev11
> +sleep 1
> +mdadm --fail $member1 $dev12
> +
> +# We will have 4 resync procedures, 2 spares for 2 arrays.
> +mdadm --wait $member1 $member0
> +mdadm --wait $member1 $member0
> +
> +devs0="$(get_raiddisks $member0)"
> +devs1="$(get_raiddisks $member1)"
> +expected="$dev10
> +$dev13
> +$dev8
> +$dev9"
> +
> +ret=0
> +if [ "$(echo "$devs0" | sort)" != "$expected" \
> +   -o "$(echo "$devs1" | sort)" != "$expected" ]; then
> +    echo ERROR: unexpected members
> +    echo $member0: $devs0
> +    echo $member1: $devs1
> +    ret=1
> +fi
> +
> +mdadm -E $dev10 >$tmp
> +if ! grep -q 'state\[0\] : Optimal, Consistent' $tmp; then
> +    echo ERROR: $member0 should be optimal in meta data
> +    ret=1
> +fi
> +if ! grep -q 'state\[1\] : Optimal, Consistent' $tmp; then
> +    echo ERROR: $member1 should be optimal in meta data
> +    ret=1
> +fi
> +if [ x"$(grep -c active/Online $tmp)" != x4 ]; then
> +    echo ERROR: expected 4 online disks
> +    ret=1
> +fi
> +if [ x"$(grep -c "Offline, Failed" $tmp)" != x2 ]; then
> +    echo ERROR: expected 2 failed disks
> +    ret=1
> +fi
> +
> +sum0a=$(sha1sum $member0)
> +sum1a=$(sha1sum $member1)
> +
> +if [ "$sum0" != "$sum0a" -o "$sum1" != "$sum1a" ]; then
> +   echo ERROR: checksum mismatch
> +   ret=1
> +fi
> +
> +if [ $ret -eq 1 ]; then
> +    cat /proc/mdstat
> +    cat $tmp
> +fi
> +
> +[ -f /tmp/mdmon.txt ] && {
> +  cat /tmp/mdmon.txt
> +  rm -f /tmp/mdmon.txt
> +}
> +rm -f $tmp
> +
> +[ $ret -eq 0 ]


Applied, thanks.

NeilBrown

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 828 bytes --]