From: Julie Ashworth <ashworth@berkeley.edu>
To: Phil Turmel <philip@turmel.org>
Cc: linux-raid@vger.kernel.org
Subject: Re: request help with RAID1 array that endlessly attempts to sync
Date: Tue, 17 Dec 2013 11:26:37 -0800 [thread overview]
Message-ID: <20131217192637.GB5070@localhost.localdomain> (raw)
In-Reply-To: <52B09027.5090605@turmel.org>
[-- Attachment #1: Type: text/plain, Size: 1649 bytes --]
Thanks Phil,
I should note that the drives are labelled "enterprise", purchased from a hw RAID vendor (ACNC.com).
On 17-12-2013 12.55 -0500, Phil Turmel wrote:
> Please post the output of "smartctl -x" for both of these drives.
The Centos5 smartctl (from smartmontools rpm) doesn't support the -x option. However, it's apparently equivelent to:
smartctl -H -i -g all -c -A -f brief -l xerror,error -l xselftest,selftest -l selective -l directory -l scttemp -l scterc -l devstat -l sataphy
Centos5 smartctl supports the following:
smartctl -H -i -c -A -l error -l selftest -l selective -l directory -l scttemp -l scttempsts -l scttemphist
... and I enclosed the output for sda and sdb.
If you think it would be useful to have the additional options (provided by -x), then let me know, and I'll try to build it.
> timeout mismatches combined with lack of scrubbing.
I've read about mismatches, but not about scrubbing. I'll investigate this.
What program/options do your weekly scrub?
> Maybe not. Please tell us you know all about error recovery timeouts
Instead of stopping the sync, I decided to slow it down:
echo 1001 > /proc/sys/dev/raid/speed_limit_max
> and the timeout mismatch problem commonly encountered with
> consumer-grade hard drives. Otherwise, you might want search the list
> archives for various combinations of the keywords "scterc", "error
> recovery", "timeout mismatch", "URE", and/or "bit error rate".
I'm not a big fan of Seagate (enterprise or not). The drives I purchased before these (~2008) needed to have firmware updates to prevent bricking. Sigh.
Thanks for your help and search tips.
best,
Julie
----
[-- Attachment #2: smartctl.sda.out --]
[-- Type: text/plain, Size: 7817 bytes --]
smartctl version 5.38 [x86_64-redhat-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Device Model: Hitachi HUA722010CLA330
Serial Number: JPW9J0N12TGPJV
Firmware Version: JP4OA3EA
User Capacity: 1,000,204,886,016 bytes
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 4
Local Time is: Tue Dec 17 11:14:24 2013 PST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (9337) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 156) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0
2 Throughput_Performance 0x0005 137 137 054 Pre-fail Offline - 90
3 Spin_Up_Time 0x0007 100 100 024 Pre-fail Always - 249
4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 5
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 142 142 020 Pre-fail Offline - 29
9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 46
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 5
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 6
193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 6
194 Temperature_Celsius 0x0002 253 253 000 Old_age Always - 22 (Lifetime Min/Max 20/37)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0
Log Directory Supported
SMART Log Directory Logging Version 1 [multi-sector log support]
Log at address 0x00 has 001 sectors [Log Directory]
Log at address 0x01 has 001 sectors [Summary SMART error log]
Log at address 0x06 has 001 sectors [SMART self-test log]
Log at address 0x09 has 001 sectors [Selective self-test log]
Log at address 0x80 has 016 sectors [Host vendor specific log]
Log at address 0x81 has 016 sectors [Host vendor specific log]
Log at address 0x82 has 016 sectors [Host vendor specific log]
Log at address 0x83 has 016 sectors [Host vendor specific log]
Log at address 0x84 has 016 sectors [Host vendor specific log]
Log at address 0x85 has 016 sectors [Host vendor specific log]
Log at address 0x86 has 016 sectors [Host vendor specific log]
Log at address 0x87 has 016 sectors [Host vendor specific log]
Log at address 0x88 has 016 sectors [Host vendor specific log]
Log at address 0x89 has 016 sectors [Host vendor specific log]
Log at address 0x8a has 016 sectors [Host vendor specific log]
Log at address 0x8b has 016 sectors [Host vendor specific log]
Log at address 0x8c has 016 sectors [Host vendor specific log]
Log at address 0x8d has 016 sectors [Host vendor specific log]
Log at address 0x8e has 016 sectors [Host vendor specific log]
Log at address 0x8f has 016 sectors [Host vendor specific log]
Log at address 0x90 has 016 sectors [Host vendor specific log]
Log at address 0x91 has 016 sectors [Host vendor specific log]
Log at address 0x92 has 016 sectors [Host vendor specific log]
Log at address 0x93 has 016 sectors [Host vendor specific log]
Log at address 0x94 has 016 sectors [Host vendor specific log]
Log at address 0x95 has 016 sectors [Host vendor specific log]
Log at address 0x96 has 016 sectors [Host vendor specific log]
Log at address 0x97 has 016 sectors [Host vendor specific log]
Log at address 0x98 has 016 sectors [Host vendor specific log]
Log at address 0x99 has 016 sectors [Host vendor specific log]
Log at address 0x9a has 016 sectors [Host vendor specific log]
Log at address 0x9b has 016 sectors [Host vendor specific log]
Log at address 0x9c has 016 sectors [Host vendor specific log]
Log at address 0x9d has 016 sectors [Host vendor specific log]
Log at address 0x9e has 016 sectors [Host vendor specific log]
Log at address 0x9f has 016 sectors [Host vendor specific log]
Log at address 0xe0 has 001 sectors [Reserved log]
Log at address 0xe1 has 001 sectors [Reserved log]
SMART Error Log Version: 0
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 256 (0x0100)
SCT Support Level: 1
Device State: SMART Off-line Data Collection executing in background (4)
Current Temperature: 22 Celsius
Power Cycle Min/Max Temperature: 20/25 Celsius
Lifetime Min/Max Temperature: 20/37 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/60 Celsius
Min/Max Temperature Limit: -40/70 Celsius
Temperature History Size (Index): 128 (110)
Index Estimated Time Temperature Celsius
111 2013-12-17 09:07 24 *****
... ..( 31 skipped). .. *****
15 2013-12-17 09:39 24 *****
16 2013-12-17 09:40 23 ****
... ..( 4 skipped). .. ****
21 2013-12-17 09:45 23 ****
22 2013-12-17 09:46 22 ***
... ..( 87 skipped). .. ***
110 2013-12-17 11:14 22 ***
[-- Attachment #3: smartctl.sdb.out --]
[-- Type: text/plain, Size: 14510 bytes --]
smartctl version 5.38 [x86_64-redhat-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Device Model: ST31000340NS
Serial Number: 9QJ6Y79S
Firmware Version: SN06
User Capacity: 1,000,204,886,016 bytes
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 4
Local Time is: Tue Dec 17 11:14:32 2013 PST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 625) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 220) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x103d) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 081 062 044 Pre-fail Always - 142396197
3 Spin_Up_Time 0x0003 099 099 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 30
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 3
7 Seek_Error_Rate 0x000f 081 060 030 Pre-fail Always - 131721923
9 Power_On_Hours 0x0032 067 067 000 Old_age Always - 29575
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 037 020 Old_age Always - 30
184 Unknown_Attribute 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 098 098 000 Old_age Always - 2
188 Unknown_Attribute 0x0032 100 096 000 Old_age Always - 42950328381
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 079 060 045 Old_age Always - 21 (Lifetime Min/Max 21/22)
194 Temperature_Celsius 0x0022 021 040 000 Old_age Always - 21 (0 15 0 0)
195 Hardware_ECC_Recovered 0x001a 061 048 000 Old_age Always - 142396197
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 1
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 1
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
Log Directory Supported
SMART Log Directory Logging Version 1 [multi-sector log support]
Log at address 0x00 has 001 sectors [Log Directory]
Log at address 0x01 has 001 sectors [Summary SMART error log]
Log at address 0x02 has 005 sectors [Comprehensive SMART error log]
Log at address 0x03 has 005 sectors [Extended Comprehensive SMART error log]
Log at address 0x06 has 001 sectors [SMART self-test log]
Log at address 0x07 has 001 sectors [Extended self-test log]
Log at address 0x09 has 001 sectors [Selective self-test log]
Log at address 0x10 has 001 sectors [Reserved log]
Log at address 0x11 has 001 sectors [Reserved log]
Log at address 0x21 has 001 sectors [Write stream error log]
Log at address 0x22 has 001 sectors [Read stream error log]
Log at address 0x80 has 016 sectors [Host vendor specific log]
Log at address 0x81 has 016 sectors [Host vendor specific log]
Log at address 0x82 has 016 sectors [Host vendor specific log]
Log at address 0x83 has 016 sectors [Host vendor specific log]
Log at address 0x84 has 016 sectors [Host vendor specific log]
Log at address 0x85 has 016 sectors [Host vendor specific log]
Log at address 0x86 has 016 sectors [Host vendor specific log]
Log at address 0x87 has 016 sectors [Host vendor specific log]
Log at address 0x88 has 016 sectors [Host vendor specific log]
Log at address 0x89 has 016 sectors [Host vendor specific log]
Log at address 0x8a has 016 sectors [Host vendor specific log]
Log at address 0x8b has 016 sectors [Host vendor specific log]
Log at address 0x8c has 016 sectors [Host vendor specific log]
Log at address 0x8d has 016 sectors [Host vendor specific log]
Log at address 0x8e has 016 sectors [Host vendor specific log]
Log at address 0x8f has 016 sectors [Host vendor specific log]
Log at address 0x90 has 016 sectors [Host vendor specific log]
Log at address 0x91 has 016 sectors [Host vendor specific log]
Log at address 0x92 has 016 sectors [Host vendor specific log]
Log at address 0x93 has 016 sectors [Host vendor specific log]
Log at address 0x94 has 016 sectors [Host vendor specific log]
Log at address 0x95 has 016 sectors [Host vendor specific log]
Log at address 0x96 has 016 sectors [Host vendor specific log]
Log at address 0x97 has 016 sectors [Host vendor specific log]
Log at address 0x98 has 016 sectors [Host vendor specific log]
Log at address 0x99 has 016 sectors [Host vendor specific log]
Log at address 0x9a has 016 sectors [Host vendor specific log]
Log at address 0x9b has 016 sectors [Host vendor specific log]
Log at address 0x9c has 016 sectors [Host vendor specific log]
Log at address 0x9d has 016 sectors [Host vendor specific log]
Log at address 0x9e has 016 sectors [Host vendor specific log]
Log at address 0x9f has 016 sectors [Host vendor specific log]
Log at address 0xa1 has 020 sectors [Device vendor specific log]
Log at address 0xa8 has 065 sectors [Device vendor specific log]
Log at address 0xa9 has 001 sectors [Device vendor specific log]
Log at address 0xe0 has 001 sectors [Reserved log]
Log at address 0xe1 has 001 sectors [Reserved log]
SMART Error Log Version: 1
ATA Error Count: 60 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 60 occurred at disk power-on lifetime: 29572 hours (1232 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 ff ff ff 4f 00 24d+00:14:08.396 READ FPDMA QUEUED
27 00 00 00 00 00 e0 00 24d+00:14:08.368 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 00 24d+00:14:08.367 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 24d+00:14:08.353 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 24d+00:14:08.326 READ NATIVE MAX ADDRESS EXT
Error 59 occurred at disk power-on lifetime: 29572 hours (1232 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 ff ff ff 4f 00 24d+00:14:05.247 READ FPDMA QUEUED
27 00 00 00 00 00 e0 00 24d+00:14:05.220 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 00 24d+00:14:05.218 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 24d+00:14:05.205 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 24d+00:14:05.177 READ NATIVE MAX ADDRESS EXT
Error 58 occurred at disk power-on lifetime: 29572 hours (1232 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 ff ff ff 4f 00 24d+00:14:02.124 READ FPDMA QUEUED
27 00 00 00 00 00 e0 00 24d+00:14:02.096 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 00 24d+00:14:02.095 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 24d+00:14:02.081 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 24d+00:14:02.054 READ NATIVE MAX ADDRESS EXT
Error 57 occurred at disk power-on lifetime: 29572 hours (1232 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 ff ff ff 4f 00 24d+00:13:58.992 READ FPDMA QUEUED
27 00 00 00 00 00 e0 00 24d+00:13:58.964 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 00 24d+00:13:58.963 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 24d+00:13:58.950 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 24d+00:13:58.922 READ NATIVE MAX ADDRESS EXT
Error 56 occurred at disk power-on lifetime: 29572 hours (1232 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 ff ff ff 4f 00 24d+00:13:55.835 READ FPDMA QUEUED
27 00 00 00 00 00 e0 00 24d+00:13:55.808 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 00 24d+00:13:55.806 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 24d+00:13:55.793 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 24d+00:13:55.765 READ NATIVE MAX ADDRESS EXT
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Aborted by host 60% 29560 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 522 (0x020a)
SCT Support Level: 1
Device State: Active (0)
Current Temperature: 21 Celsius
Power Cycle Min/Max Temperature: 21/22 Celsius
Lifetime Min/Max Temperature: 15/40 Celsius
Under/Over Temperature Limit Count: 0/15
SCT Temperature History Version: 2
Temperature Sampling Period: 10 minutes
Temperature Logging Interval: 10 minutes
Min/Max recommended Temperature: 0/ 0 Celsius
Min/Max Temperature Limit: 0/ 0 Celsius
Temperature History Size (Index): 128 (20)
Index Estimated Time Temperature Celsius
21 2013-12-16 14:00 22 ***
... ..( 18 skipped). .. ***
40 2013-12-16 17:10 22 ***
41 2013-12-16 17:20 23 ****
42 2013-12-16 17:30 22 ***
... ..( 9 skipped). .. ***
52 2013-12-16 19:10 22 ***
53 2013-12-16 19:20 21 **
54 2013-12-16 19:30 22 ***
... ..( 25 skipped). .. ***
80 2013-12-16 23:50 22 ***
81 2013-12-17 00:00 21 **
82 2013-12-17 00:10 22 ***
83 2013-12-17 00:20 21 **
84 2013-12-17 00:30 22 ***
85 2013-12-17 00:40 21 **
... ..( 3 skipped). .. **
89 2013-12-17 01:20 21 **
90 2013-12-17 01:30 22 ***
... ..( 7 skipped). .. ***
98 2013-12-17 02:50 22 ***
99 2013-12-17 03:00 21 **
... ..( 9 skipped). .. **
109 2013-12-17 04:40 21 **
110 2013-12-17 04:50 22 ***
... ..( 7 skipped). .. ***
118 2013-12-17 06:10 22 ***
119 2013-12-17 06:20 21 **
... ..( 10 skipped). .. **
2 2013-12-17 08:10 21 **
3 2013-12-17 08:20 22 ***
4 2013-12-17 08:30 22 ***
5 2013-12-17 08:40 ? -
6 2013-12-17 08:50 22 ***
7 2013-12-17 09:00 22 ***
8 2013-12-17 09:10 22 ***
9 2013-12-17 09:20 21 **
10 2013-12-17 09:30 22 ***
11 2013-12-17 09:40 22 ***
12 2013-12-17 09:50 21 **
... ..( 7 skipped). .. **
20 2013-12-17 11:10 21 **
next prev parent reply other threads:[~2013-12-17 19:26 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-12-17 6:50 request help with RAID1 array that endlessly attempts to sync Julie Ashworth
2013-12-17 16:53 ` Julie Ashworth
2013-12-17 17:55 ` Phil Turmel
2013-12-17 19:26 ` Julie Ashworth [this message]
2013-12-17 19:43 ` Phil Turmel
2013-12-17 23:12 ` David C. Rankin
2013-12-18 3:45 ` Julie Ashworth
2013-12-18 12:08 ` Phil Turmel
2014-01-21 6:38 ` Julie Ashworth
2014-01-21 13:23 ` Phil Turmel
2014-02-25 0:16 ` Julie Ashworth
2013-12-17 18:12 ` Wilson Jonathan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20131217192637.GB5070@localhost.localdomain \
--to=ashworth@berkeley.edu \
--cc=linux-raid@vger.kernel.org \
--cc=philip@turmel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).