From mboxrd@z Thu Jan 1 00:00:00 1970 From: NeilBrown Subject: Re: Crash during recover Date: Tue, 29 Jul 2014 20:48:06 +1000 Message-ID: <20140729204806.48632819@notabene.brown> References: <026c01cfab18$2f479960$8dd6cc20$@gmail.com> Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; boundary="Sig_/8wSwpmhBKCrvp1nWkNuB62W"; protocol="application/pgp-signature" Return-path: In-Reply-To: <026c01cfab18$2f479960$8dd6cc20$@gmail.com> Sender: linux-raid-owner@vger.kernel.org To: Matthias Appel Cc: linux-raid@vger.kernel.org List-Id: linux-raid.ids --Sig_/8wSwpmhBKCrvp1nWkNuB62W Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: quoted-printable On Tue, 29 Jul 2014 12:30:53 +0200 "Matthias Appel" wrote: > Hi all, >=20 > I have a problem with my 4 disk software raid 5. > I had a defective disk which I identified and changed and the rebuild > started. >=20 > But somewhere around 6pm the machine crashed and I had to reset it this > morning. > The problem is the raid won't start because it complains about missing > drives. >=20 > I did mdadm -examine and saw the event counter on one disk was slightly o= ff > and obviously two disks fell off the raid the same time, giving me ..AA l= ike > you see down below. >=20 > I tried to force assemble the array and I got the message about the event > counter being adjusted. > I assumed the raid would start now, like multiple times before I had same > issues with multiple failing drives/controllers >=20 > But this time not....I says that the raid is missing 2 disks but examine > looks not this bad AFAIKS. > I read the recovery wiki entry, but there it tells me to recreate the arr= ay > without initial sync but I don't want to go this way because I think this > should only be the last resort. >=20 > Can anybody look at the mdadm --examine of my disks and tell me why my ra= id > is complaining about missing disks and how to recover from this issue: >=20 > If you need some more information, pleas tell me, what you need and I will > try to get it! >=20 > Thanks in advance, >=20 > Matthias >=20 Looks like it should start. What version of mdadm and kernel do you have? What does: mdadm -V uname -a mdadm -A /dev/md0 --force -vvv /dev/sd[abe] report? NeilBrown --Sig_/8wSwpmhBKCrvp1nWkNuB62W Content-Type: application/pgp-signature; name=signature.asc Content-Disposition: attachment; filename=signature.asc -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.22 (GNU/Linux) iQIVAwUBU9d75jnsnt1WYoG5AQKK0BAAgoALYJr2tZG/M5to9bTaS6nm6yxDUMVm P7PnzFJCwxXRqtLMhTEFJoBDwMgjOTSv1tzr6c95H1U79ZTxFqR5MyuluMVV8XsR 09LVGgWCdKg66MM1E+5dE05XKCBQJIkqEG+46vspGivn0MZN5d6njHA/ZYu4x1k7 l7yABYG2NQiDPfKy7lpe3wLXmyF6YR2caajXJzVuROlUlsdbiul0oBcCEdNoTrBY Y0HFOnOokfa9YKB60hj+27cFzPwbuTl46pfHKwHxZuCVXvpW+zOVHlp9rP4+XCEc J9RAK3YmjOe+SUXoZvz4XpMPZ3ic6WTjSJEwoOfEExjjJq0wKLMTbsEWAqAVTt6O ZpeY/a6TYHQwwwUG6myK6TmGLmDg24kxCUehvC7uaTCNcTUkz5ota8ZmDpMXTF+K tiYFeDcpFDnCH+3Hx70NoaH/UyXM9D5JrsXZ75ZyAyeNZ8dTBk2cPWDYwSdjf92X A6GkXfJ1VKNa3qdNezujFFx96aqA+i2vhGHEuParnUcYrnjymd7V+uB5ETocF9T8 R7o+v0UXuIrGCdwRbVMYB61Lf8JM13M6cqNzG18Ty+qW4fRh0OW2bjkrLuyhMNJq h84ydJHUK4vWuY7OZGixhljZGqYWw7/dWIta8mFdFiRQjiHtvS/7HYwLSVXtT8rx RjmL4ZFvxW8= =raDy -----END PGP SIGNATURE----- --Sig_/8wSwpmhBKCrvp1nWkNuB62W--