multipath: I/O hanging forever

multipath: I/O hanging forever

[Andrea Righi]

Hello,

if I try to do I/O on a mdadm/multipath volume the task is hunging
forever and it never completes.

Anybody else has noticed the same problem?

I'm using 4.5.0-rc5+, from Linus' git. I'll try to do a git bisect
later, I'm pretty sure this problem has been introduced recently (i.e.,
I've never seen this issue with 4.1.x).

Example:

  # mdadm -C /dev/md0 --level=multipath --raid-devices=2 /dev/sdb /dev/sdc
  # cat /proc/mdstat
  Personalities : [multipath]
  md0 : active multipath sdb[0] sdc[1]
        4042740 blocks super 1.2 [2/2] [UU]
  # mkfs.xfs /dev/md0
  meta-data=/dev/md0               isize=256    agcount=4, agsize=252672
  blks
           =                       sectsz=512   attr=2, projid32bit=0
  data     =                       bsize=4096   blocks=1010685, imaxpct=25
           =                       sunit=0      swidth=0 blks
  naming   =version 2              bsize=4096   ascii-ci=0
  log      =internal log           bsize=4096   blocks=2560, version=2
           =                       sectsz=512   sunit=0 blks, lazy-count=1
  realtime =none                   extsz=4096   blocks=0, rtextents=0
  ^C^C^C

 # cat /proc/`pidof mkfs.xfs`/stack
 [<ffffffff8126f53c>] do_blockdev_direct_IO+0x1adc/0x2300
 [<ffffffff8126fda3>] __blockdev_direct_IO+0x43/0x50
 [<ffffffff8126accc>] blkdev_direct_IO+0x4c/0x50
 [<ffffffff811a2014>] generic_file_direct_write+0xa4/0x160
 [<ffffffff811a2190>] __generic_file_write_iter+0xc0/0x1e0
 [<ffffffff8126afc0>] blkdev_write_iter+0x80/0x100
 [<ffffffff81228c3d>] __vfs_write+0xad/0xe0
 [<ffffffff81229a85>] vfs_write+0xa5/0x1a0
 [<ffffffff8122aacc>] SyS_pwrite64+0x6c/0xa0
 [<ffffffff818281f2>] entry_SYSCALL_64_fastpath+0x12/0x76
 [<ffffffffffffffff>] 0xffffffffffffffff

Thanks,
-Andrea

Re: multipath: I/O hanging forever

[Andrea Righi]

On Sun, Feb 28, 2016 at 06:53:33PM -0700, Andrea Righi wrote:
... 
> I'm using 4.5.0-rc5+, from Linus' git. I'll try to do a git bisect
> later, I'm pretty sure this problem has been introduced recently (i.e.,
> I've never seen this issue with 4.1.x).

I confirm, just tested kernel 4.1 and this problem doesn't happen.

Thanks,
-Andrea

Re: multipath: I/O hanging forever

[Andrea Righi]

On Sun, Feb 28, 2016 at 08:46:16PM -0700, Andrea Righi wrote:
> On Sun, Feb 28, 2016 at 06:53:33PM -0700, Andrea Righi wrote:
> ... 
> > I'm using 4.5.0-rc5+, from Linus' git. I'll try to do a git bisect
> > later, I'm pretty sure this problem has been introduced recently (i.e.,
> > I've never seen this issue with 4.1.x).
> 
> I confirm, just tested kernel 4.1 and this problem doesn't happen.

Alright, I had some spare time to bisect this problem and I found that
the commit that introduced this issue is c66a14d.

So, I tried to revert the commit (with some changes to fix conflicts and
ABI changes) and now multipath seems to work fine for me (no hung task).

I'm not suggesting to apply the following patch, because if everthing
else is working (except multipath) probably the problem is in multipath
itself (any suggestion?). Anyway, for those who wanna test it, this is a
possible fix.

Thanks,
-Andrea

---
Subject: block: revert c66a14d (simplify bio_add_page())

Revert this change to avoid breaking the multipath (md) module.
After this commit doing I/O on a multipath volume makes tasks to hang
forever.

Example:

 # mdadm -C /dev/md0 --level=multipath --raid-devices=2 /dev/sdb
 # /dev/sdc
  # cat /proc/mdstat
  Personalities : [multipath]
  md0 : active multipath sdb[0] sdc[1]
        4042740 blocks super 1.2 [2/2] [UU]
  # mkfs.xfs /dev/md0
  meta-data=/dev/md0               isize=256    agcount=4, agsize=252672
  blks
           =                       sectsz=512   attr=2, projid32bit=0
  data     =                       bsize=4096   blocks=1010685, imaxpct=25
           =                       sunit=0      swidth=0 blks
  naming   =version 2              bsize=4096   ascii-ci=0
  log      =internal log           bsize=4096   blocks=2560, version=2
           =                       sectsz=512   sunit=0 blks, lazy-count=1
  realtime =none                   extsz=4096   blocks=0, rtextents=0
  ^C^C^C

 # cat /proc/`pidof mkfs.xfs`/stack
 [<ffffffff8126f53c>] do_blockdev_direct_IO+0x1adc/0x2300
 [<ffffffff8126fda3>] __blockdev_direct_IO+0x43/0x50
 [<ffffffff8126accc>] blkdev_direct_IO+0x4c/0x50
 [<ffffffff811a2014>] generic_file_direct_write+0xa4/0x160
 [<ffffffff811a2190>] __generic_file_write_iter+0xc0/0x1e0
 [<ffffffff8126afc0>] blkdev_write_iter+0x80/0x100
 [<ffffffff81228c3d>] __vfs_write+0xad/0xe0
 [<ffffffff81229a85>] vfs_write+0xa5/0x1a0
 [<ffffffff8122aacc>] SyS_pwrite64+0x6c/0xa0
 [<ffffffff818281f2>] entry_SYSCALL_64_fastpath+0x12/0x76
 [<ffffffffffffffff>] 0xffffffffffffffff

Signed-off-by: Andrea Righi <andrea@betterlinux.com>
---
 block/bio.c | 110 ++++++++++++++++++++++++++++++++----------------------------
 1 file changed, 58 insertions(+), 52 deletions(-)

diff --git a/block/bio.c b/block/bio.c
index cf75915..3cfcd9d 100644
--- a/block/bio.c
+++ b/block/bio.c
@@ -694,22 +694,31 @@ integrity_clone:
 EXPORT_SYMBOL(bio_clone_bioset);
 
 /**
- *	bio_add_pc_page	-	attempt to add page to bio
- *	@q: the target queue
- *	@bio: destination bio
- *	@page: page to add
- *	@len: vec entry length
- *	@offset: vec entry offset
- *
- *	Attempt to add a page to the bio_vec maplist. This can fail for a
- *	number of reasons, such as the bio being full or target block device
- *	limitations. The target block device must allow bio's up to PAGE_SIZE,
- *	so it is always possible to add a single page to an empty bio.
+ *	bio_get_nr_vecs		- return approx number of vecs
+ *	@bdev:  I/O target
  *
- *	This should only be used by REQ_PC bios.
+ *	Return the approximate number of pages we can send to this target.
+ *	There's no guarantee that you will be able to fit this number of pages
+ *	into a bio, it does not account for dynamic restrictions that vary
+ *	on offset.
  */
-int bio_add_pc_page(struct request_queue *q, struct bio *bio, struct page
-		    *page, unsigned int len, unsigned int offset)
+int bio_get_nr_vecs(struct block_device *bdev)
+{
+	struct request_queue *q = bdev_get_queue(bdev);
+	int nr_pages;
+
+	nr_pages = min_t(unsigned,
+		     queue_max_segments(q),
+		     queue_max_sectors(q) / (PAGE_SIZE >> 9) + 1);
+
+	return min_t(unsigned, nr_pages, BIO_MAX_PAGES);
+
+}
+EXPORT_SYMBOL(bio_get_nr_vecs);
+
+static int __bio_add_page(struct request_queue *q, struct bio *bio, struct page
+			  *page, unsigned int len, unsigned int offset,
+			  unsigned int max_sectors)
 {
 	int retried_segments = 0;
 	struct bio_vec *bvec;
@@ -720,7 +729,7 @@ int bio_add_pc_page(struct request_queue *q, struct bio *bio, struct page
 	if (unlikely(bio_flagged(bio, BIO_CLONED)))
 		return 0;
 
-	if (((bio->bi_iter.bi_size + len) >> 9) > queue_max_hw_sectors(q))
+	if (((bio->bi_iter.bi_size + len) >> 9) > max_sectors)
 		return 0;
 
 	/*
@@ -791,6 +800,28 @@ int bio_add_pc_page(struct request_queue *q, struct bio *bio, struct page
 	blk_recount_segments(q, bio);
 	return 0;
 }
+
+/**
+ *	bio_add_pc_page	-	attempt to add page to bio
+ *	@q: the target queue
+ *	@bio: destination bio
+ *	@page: page to add
+ *	@len: vec entry length
+ *	@offset: vec entry offset
+ *
+ *	Attempt to add a page to the bio_vec maplist. This can fail for a
+ *	number of reasons, such as the bio being full or target block device
+ *	limitations. The target block device must allow bio's up to PAGE_SIZE,
+ *	so it is always possible to add a single page to an empty bio.
+ *
+ *	This should only be used by REQ_PC bios.
+ */
+int bio_add_pc_page(struct request_queue *q, struct bio *bio, struct page *page,
+		    unsigned int len, unsigned int offset)
+{
+	return __bio_add_page(q, bio, page, len, offset,
+			      queue_max_hw_sectors(q));
+}
 EXPORT_SYMBOL(bio_add_pc_page);
 
 /**
@@ -800,47 +831,22 @@ EXPORT_SYMBOL(bio_add_pc_page);
  *	@len: vec entry length
  *	@offset: vec entry offset
  *
- *	Attempt to add a page to the bio_vec maplist. This will only fail
- *	if either bio->bi_vcnt == bio->bi_max_vecs or it's a cloned bio.
+ *	Attempt to add a page to the bio_vec maplist. This can fail for a
+ *	number of reasons, such as the bio being full or target block device
+ *	limitations. The target block device must allow bio's up to PAGE_SIZE,
+ *	so it is always possible to add a single page to an empty bio.
  */
-int bio_add_page(struct bio *bio, struct page *page,
-		 unsigned int len, unsigned int offset)
+int bio_add_page(struct bio *bio, struct page *page, unsigned int len,
+		 unsigned int offset)
 {
-	struct bio_vec *bv;
+	struct request_queue *q = bdev_get_queue(bio->bi_bdev);
+	unsigned int max_sectors;
 
-	/*
-	 * cloned bio must not modify vec list
-	 */
-	if (WARN_ON_ONCE(bio_flagged(bio, BIO_CLONED)))
-		return 0;
+	max_sectors = blk_max_size_offset(q, bio->bi_iter.bi_sector);
+	if ((max_sectors < (len >> 9)) && !bio->bi_iter.bi_size)
+		max_sectors = len >> 9;
 
-	/*
-	 * For filesystems with a blocksize smaller than the pagesize
-	 * we will often be called with the same page as last time and
-	 * a consecutive offset.  Optimize this special case.
-	 */
-	if (bio->bi_vcnt > 0) {
-		bv = &bio->bi_io_vec[bio->bi_vcnt - 1];
-
-		if (page == bv->bv_page &&
-		    offset == bv->bv_offset + bv->bv_len) {
-			bv->bv_len += len;
-			goto done;
-		}
-	}
-
-	if (bio->bi_vcnt >= bio->bi_max_vecs)
-		return 0;
-
-	bv		= &bio->bi_io_vec[bio->bi_vcnt];
-	bv->bv_page	= page;
-	bv->bv_len	= len;
-	bv->bv_offset	= offset;
-
-	bio->bi_vcnt++;
-done:
-	bio->bi_iter.bi_size += len;
-	return len;
+	return __bio_add_page(q, bio, page, len, offset, max_sectors);
 }
 EXPORT_SYMBOL(bio_add_page);
 

Re: multipath: I/O hanging forever

[Kent Overstreet]

On Fri, Mar 04, 2016 at 10:30:44AM -0700, Andrea Righi wrote:
> On Sun, Feb 28, 2016 at 08:46:16PM -0700, Andrea Righi wrote:
> > On Sun, Feb 28, 2016 at 06:53:33PM -0700, Andrea Righi wrote:
> > ... 
> > > I'm using 4.5.0-rc5+, from Linus' git. I'll try to do a git bisect
> > > later, I'm pretty sure this problem has been introduced recently (i.e.,
> > > I've never seen this issue with 4.1.x).
> > 
> > I confirm, just tested kernel 4.1 and this problem doesn't happen.
> 
> Alright, I had some spare time to bisect this problem and I found that
> the commit that introduced this issue is c66a14d.
> 
> So, I tried to revert the commit (with some changes to fix conflicts and
> ABI changes) and now multipath seems to work fine for me (no hung task).

Is it hanging on first IO, first large IO, or just randomly?

Re: multipath: I/O hanging forever

[Andrea Righi]

On Sat, Mar 05, 2016 at 08:31:03PM -0900, Kent Overstreet wrote:
> On Fri, Mar 04, 2016 at 10:30:44AM -0700, Andrea Righi wrote:
> > On Sun, Feb 28, 2016 at 08:46:16PM -0700, Andrea Righi wrote:
> > > On Sun, Feb 28, 2016 at 06:53:33PM -0700, Andrea Righi wrote:
> > > ... 
> > > > I'm using 4.5.0-rc5+, from Linus' git. I'll try to do a git bisect
> > > > later, I'm pretty sure this problem has been introduced recently (i.e.,
> > > > I've never seen this issue with 4.1.x).
> > > 
> > > I confirm, just tested kernel 4.1 and this problem doesn't happen.
> > 
> > Alright, I had some spare time to bisect this problem and I found that
> > the commit that introduced this issue is c66a14d.
> > 
> > So, I tried to revert the commit (with some changes to fix conflicts and
> > ABI changes) and now multipath seems to work fine for me (no hung task).
> 
> Is it hanging on first IO, first large IO, or just randomly?

It's always the very first O_DIRECT I/O, in general the task gets stuck
in do_blockdev_direct_IO().

Thanks,
-Andrea

Re: multipath: I/O hanging forever

[Ming Lei]

On Fri, 11 Mar 2016 15:24:33 -0700
Andrea Righi <righi.andrea@gmail.com> wrote:

> On Sat, Mar 05, 2016 at 08:31:03PM -0900, Kent Overstreet wrote:
> > On Fri, Mar 04, 2016 at 10:30:44AM -0700, Andrea Righi wrote:
> > > On Sun, Feb 28, 2016 at 08:46:16PM -0700, Andrea Righi wrote:
> > > > On Sun, Feb 28, 2016 at 06:53:33PM -0700, Andrea Righi wrote:
> > > > ... 
> > > > > I'm using 4.5.0-rc5+, from Linus' git. I'll try to do a git bisect
> > > > > later, I'm pretty sure this problem has been introduced recently (i.e.,
> > > > > I've never seen this issue with 4.1.x).
> > > > 
> > > > I confirm, just tested kernel 4.1 and this problem doesn't happen.
> > > 
> > > Alright, I had some spare time to bisect this problem and I found that
> > > the commit that introduced this issue is c66a14d.
> > > 
> > > So, I tried to revert the commit (with some changes to fix conflicts and
> > > ABI changes) and now multipath seems to work fine for me (no hung task).
> > 
> > Is it hanging on first IO, first large IO, or just randomly?
> 
> It's always the very first O_DIRECT I/O, in general the task gets stuck
> in do_blockdev_direct_IO().

I can reproduce the issue too, and looks it is a MD issue instead of block.
Andrea, could you try the following patch to see if it can fix your issue?

---
From 43fc9c221e53c64f2df7c100c77cc25c4a98c607 Mon Sep 17 00:00:00 2001
From: Ming Lei <ming.lei@canonical.com>
Date: Sat, 12 Mar 2016 09:29:40 +0800
Subject: [PATCH] md: multipath: don't hardcopy bio in .make_request path

Inside multipath_make_request(), multipath maps the incoming
bio into low level device's bio, but it is totally wrong to
copy the bio into mapped bio via '*mapped_bio = *bio'. For
example, .__bi_remaining is kept in the copy, especially if
the incoming bio is chained to via bio splitting, so .bi_end_io
can't be called for the mapped bio at all in the completing path
in this kind of situation.

This patch fixes the issue by using clone style.

Signed-off-by: Ming Lei <ming.lei@canonical.com>
---
 drivers/md/multipath.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/md/multipath.c b/drivers/md/multipath.c
index 0a72ab6..dd483bb 100644
--- a/drivers/md/multipath.c
+++ b/drivers/md/multipath.c
@@ -129,7 +129,9 @@ static void multipath_make_request(struct mddev *mddev, struct bio * bio)
 	}
 	multipath = conf->multipaths + mp_bh->path;
 
-	mp_bh->bio = *bio;
+	bio_init(&mp_bh->bio);
+	__bio_clone_fast(&mp_bh->bio, bio);
+
 	mp_bh->bio.bi_iter.bi_sector += multipath->rdev->data_offset;
 	mp_bh->bio.bi_bdev = multipath->rdev->bdev;
 	mp_bh->bio.bi_rw |= REQ_FAILFAST_TRANSPORT;
-- 
1.9.1


Thanks,

Re: multipath: I/O hanging forever

[Andrea Righi]

On Sat, Mar 12, 2016 at 09:47:23AM +0800, Ming Lei wrote:
> On Fri, 11 Mar 2016 15:24:33 -0700
> Andrea Righi <righi.andrea@gmail.com> wrote:
> 
> > On Sat, Mar 05, 2016 at 08:31:03PM -0900, Kent Overstreet wrote:
> > > On Fri, Mar 04, 2016 at 10:30:44AM -0700, Andrea Righi wrote:
> > > > On Sun, Feb 28, 2016 at 08:46:16PM -0700, Andrea Righi wrote:
> > > > > On Sun, Feb 28, 2016 at 06:53:33PM -0700, Andrea Righi wrote:
> > > > > ... 
> > > > > > I'm using 4.5.0-rc5+, from Linus' git. I'll try to do a git bisect
> > > > > > later, I'm pretty sure this problem has been introduced recently (i.e.,
> > > > > > I've never seen this issue with 4.1.x).
> > > > > 
> > > > > I confirm, just tested kernel 4.1 and this problem doesn't happen.
> > > > 
> > > > Alright, I had some spare time to bisect this problem and I found that
> > > > the commit that introduced this issue is c66a14d.
> > > > 
> > > > So, I tried to revert the commit (with some changes to fix conflicts and
> > > > ABI changes) and now multipath seems to work fine for me (no hung task).
> > > 
> > > Is it hanging on first IO, first large IO, or just randomly?
> > 
> > It's always the very first O_DIRECT I/O, in general the task gets stuck
> > in do_blockdev_direct_IO().
> 
> I can reproduce the issue too, and looks it is a MD issue instead of block.
> Andrea, could you try the following patch to see if it can fix your issue?

It works perfectly to me.

Thanks!
-Andrea

Tested-by: Andrea Righi <righi.andrea@gmail.com>

> 
> ---
> From 43fc9c221e53c64f2df7c100c77cc25c4a98c607 Mon Sep 17 00:00:00 2001
> From: Ming Lei <ming.lei@canonical.com>
> Date: Sat, 12 Mar 2016 09:29:40 +0800
> Subject: [PATCH] md: multipath: don't hardcopy bio in .make_request path
> 
> Inside multipath_make_request(), multipath maps the incoming
> bio into low level device's bio, but it is totally wrong to
> copy the bio into mapped bio via '*mapped_bio = *bio'. For
> example, .__bi_remaining is kept in the copy, especially if
> the incoming bio is chained to via bio splitting, so .bi_end_io
> can't be called for the mapped bio at all in the completing path
> in this kind of situation.
> 
> This patch fixes the issue by using clone style.
> 
> Signed-off-by: Ming Lei <ming.lei@canonical.com>
> ---
>  drivers/md/multipath.c | 4 +++-
>  1 file changed, 3 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/md/multipath.c b/drivers/md/multipath.c
> index 0a72ab6..dd483bb 100644
> --- a/drivers/md/multipath.c
> +++ b/drivers/md/multipath.c
> @@ -129,7 +129,9 @@ static void multipath_make_request(struct mddev *mddev, struct bio * bio)
>  	}
>  	multipath = conf->multipaths + mp_bh->path;
>  
> -	mp_bh->bio = *bio;
> +	bio_init(&mp_bh->bio);
> +	__bio_clone_fast(&mp_bh->bio, bio);
> +
>  	mp_bh->bio.bi_iter.bi_sector += multipath->rdev->data_offset;
>  	mp_bh->bio.bi_bdev = multipath->rdev->bdev;
>  	mp_bh->bio.bi_rw |= REQ_FAILFAST_TRANSPORT;
> -- 
> 1.9.1
> 
> 
> Thanks,

Re: multipath: I/O hanging forever

[Shaohua Li]

On Sat, Mar 12, 2016 at 09:47:23AM +0800, Ming Lei wrote:
> On Fri, 11 Mar 2016 15:24:33 -0700
> Andrea Righi <righi.andrea@gmail.com> wrote:
> 
> > On Sat, Mar 05, 2016 at 08:31:03PM -0900, Kent Overstreet wrote:
> > > On Fri, Mar 04, 2016 at 10:30:44AM -0700, Andrea Righi wrote:
> > > > On Sun, Feb 28, 2016 at 08:46:16PM -0700, Andrea Righi wrote:
> > > > > On Sun, Feb 28, 2016 at 06:53:33PM -0700, Andrea Righi wrote:
> > > > > ... 
> > > > > > I'm using 4.5.0-rc5+, from Linus' git. I'll try to do a git bisect
> > > > > > later, I'm pretty sure this problem has been introduced recently (i.e.,
> > > > > > I've never seen this issue with 4.1.x).
> > > > > 
> > > > > I confirm, just tested kernel 4.1 and this problem doesn't happen.
> > > > 
> > > > Alright, I had some spare time to bisect this problem and I found that
> > > > the commit that introduced this issue is c66a14d.
> > > > 
> > > > So, I tried to revert the commit (with some changes to fix conflicts and
> > > > ABI changes) and now multipath seems to work fine for me (no hung task).
> > > 
> > > Is it hanging on first IO, first large IO, or just randomly?
> > 
> > It's always the very first O_DIRECT I/O, in general the task gets stuck
> > in do_blockdev_direct_IO().
> 
> I can reproduce the issue too, and looks it is a MD issue instead of block.
> Andrea, could you try the following patch to see if it can fix your issue?
> 
> ---
> From 43fc9c221e53c64f2df7c100c77cc25c4a98c607 Mon Sep 17 00:00:00 2001
> From: Ming Lei <ming.lei@canonical.com>
> Date: Sat, 12 Mar 2016 09:29:40 +0800
> Subject: [PATCH] md: multipath: don't hardcopy bio in .make_request path
> 
> Inside multipath_make_request(), multipath maps the incoming
> bio into low level device's bio, but it is totally wrong to
> copy the bio into mapped bio via '*mapped_bio = *bio'. For
> example, .__bi_remaining is kept in the copy, especially if
> the incoming bio is chained to via bio splitting, so .bi_end_io
> can't be called for the mapped bio at all in the completing path
> in this kind of situation.
> 
> This patch fixes the issue by using clone style.

Applied, thanks! Looks this issue exists since immutable bio is introduced, but
triggered recently. Will add to stable too.

Thanks,
Shaohua

Re: multipath: I/O hanging forever

[Christoph Hellwig]

Just curious: why are you using the old MD multipath driver that's
been depcrecated in favor of DM multipath a long time ago?