linux-raid.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: NeilBrown <neilb@suse.com>
To: Shaohua Li <shli@kernel.org>
Cc: linux-raid@vger.kernel.org
Subject: [md PATCH 11/18] md/raid1: small code cleanup in end_sync_write
Date: Thu, 02 Jun 2016 16:19:52 +1000	[thread overview]
Message-ID: <20160602061952.2939.80261.stgit@noble> (raw)
In-Reply-To: <20160602061319.2939.72280.stgit@noble>

'mirror' is only used to find 'rdev', several times.
So just find 'rdev' once, and use it instead.

Signed-off-by: NeilBrown <neilb@suse.com>
---
 drivers/md/raid1.c |   14 ++++----------
 1 file changed, 4 insertions(+), 10 deletions(-)

diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index 9585a6b62123..cc53120e4d68 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -1709,11 +1709,9 @@ static void end_sync_write(struct bio *bio)
 	struct r1bio *r1_bio = bio->bi_private;
 	struct mddev *mddev = r1_bio->mddev;
 	struct r1conf *conf = mddev->private;
-	int mirror=0;
 	sector_t first_bad;
 	int bad_sectors;
-
-	mirror = find_bio_disk(r1_bio, bio);
+	struct md_rdev *rdev = conf->mirrors[find_bio_disk(r1_bio, bio)].rdev;
 
 	if (!uptodate) {
 		sector_t sync_blocks = 0;
@@ -1726,16 +1724,12 @@ static void end_sync_write(struct bio *bio)
 			s += sync_blocks;
 			sectors_to_go -= sync_blocks;
 		} while (sectors_to_go > 0);
-		set_bit(WriteErrorSeen,
-			&conf->mirrors[mirror].rdev->flags);
-		if (!test_and_set_bit(WantReplacement,
-				      &conf->mirrors[mirror].rdev->flags))
+		set_bit(WriteErrorSeen, &rdev->flags);
+		if (!test_and_set_bit(WantReplacement, &rdev->flags))
 			set_bit(MD_RECOVERY_NEEDED, &
 				mddev->recovery);
 		set_bit(R1BIO_WriteError, &r1_bio->state);
-	} else if (is_badblock(conf->mirrors[mirror].rdev,
-			       r1_bio->sector,
-			       r1_bio->sectors,
+	} else if (is_badblock(rdev, r1_bio->sector, r1_bio->sectors,
 			       &first_bad, &bad_sectors) &&
 		   !is_badblock(conf->mirrors[r1_bio->read_disk].rdev,
 				r1_bio->sector,



  parent reply	other threads:[~2016-06-02  6:19 UTC|newest]

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-06-02  6:19 [md PATCH 00/18] Assorted minor fixes, particularly RCU protection NeilBrown
2016-06-02  6:19 ` [md PATCH 08/18] md/raid10: simplify print_conf a little NeilBrown
2016-06-02  6:19 ` [md PATCH 06/18] md/raid10: add rcu protection to rdev access during reshape NeilBrown
2016-06-02  6:19 ` [md PATCH 01/18] md: disconnect device from personality before trying to remove it NeilBrown
2016-06-03 22:31   ` Shaohua Li
2016-06-10  6:40     ` NeilBrown
2016-06-02  6:19 ` [md PATCH 07/18] md/raid10: minor code improvement in fix_read_error() NeilBrown
2016-06-02  6:19 ` [md PATCH 09/18] md/raid10: stop print_conf from being too verbose NeilBrown
2016-06-02 18:47   ` John Stoffel
2016-06-02 22:48     ` NeilBrown
2016-06-03 22:39       ` Shaohua Li
2016-06-10  6:47         ` NeilBrown
2016-06-02  6:19 ` [md PATCH 12/18] md/raid1: add rcu protection to rdev in fix_read_error NeilBrown
2016-06-02  6:19 ` NeilBrown [this message]
2016-06-02  6:19 ` [md PATCH 04/18] md/raid10: add rcu protection in raid10_status NeilBrown
2016-06-02  6:19 ` [md PATCH 13/18] md/raid5: add rcu protection to rdev accesses in handle_failed_sync NeilBrown
2016-06-02  6:19 ` [md PATCH 02/18] md/raid1, raid10: don't recheck "Faulty" flag in read-balance NeilBrown
2016-06-02  6:19 ` [md PATCH 15/18] md/raid5: add rcu protection to rdev accesses in raid5_status NeilBrown
2016-06-02  6:19 ` [md PATCH 16/18] md/multipath: add rcu protection to rdev access in multipath_status NeilBrown
2016-06-02  6:19 ` [md PATCH 05/18] md/raid10: add rcu protection to rdev access in raid10_sync_request NeilBrown
2016-06-03 22:33   ` Shaohua Li
2016-06-10  6:46     ` NeilBrown
2016-06-10 16:22       ` Shaohua Li
2016-06-02  6:19 ` [md PATCH 03/18] md/raid10: fix refounct imbalance when resyncing an array with a replacement device NeilBrown
2016-06-02  6:19 ` [md PATCH 10/18] md/raid1: small cleanup in raid1_end_read/write_request NeilBrown
2016-06-02  6:19 ` [md PATCH 14/18] md/raid5: add rcu protection to rdev accesses in want_replace NeilBrown
2016-06-02  6:19 ` [md PATCH 17/18] md: be extra careful not to take a reference to a Faulty device NeilBrown
2016-06-02  6:19 ` [md PATCH 18/18] md: reduce the number of synchronize_rcu() calls when multiple devices fail NeilBrown
2016-06-03 22:28 ` [md PATCH 00/18] Assorted minor fixes, particularly RCU protection Shaohua Li

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20160602061952.2939.80261.stgit@noble \
    --to=neilb@suse.com \
    --cc=linux-raid@vger.kernel.org \
    --cc=shli@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).